Related references
Note: Only part of the references are listed.Quality and durability properties and life-cycle assessment of high volume biomass fly ash mortar
E. R. Teixeira et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Influence of waste materials on buildings' life cycle environmental impacts: Adopting resource recovery principle
Md. Uzzal Hossain et al.
RESOURCES CONSERVATION AND RECYCLING (2019)
Comparative sustainability assessment of binary blended concretes using Supplementary Cementitious Materials (SCMs) and Ordinary Portland Cement (OPC)
Kamel Mohamed Rahla et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Activated slag as partial replacement of cement mortars: Effect of temperature and a novel admixture
Chaaruchandra Korde et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Strength, Carbon Footprint and Cost Considerations of Mortar Blends with High Volume Ground Granulated Blast Furnace Slag
Chiu Chuen Onn et al.
SUSTAINABILITY (2019)
The effect of fly ash fineness on heat of hydration, microstructure, flow and compressive strength of blended cement pastes
Farzad Moghaddam et al.
CASE STUDIES IN CONSTRUCTION MATERIALS (2019)
Comparing the pozzolanic activity properties of obsidian to those of fly ash and blast furnace slag
Ilker Ustabas et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Characteristics and applications of fly ash as a sustainable construction material: A state-of-the-art review
Gang Xu et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
The development of a low carbon binder produced from the ternary blending of cement, ground granulated blast furnace slag and high calcium fly ash: An experimental and statistical approach
Ali Abdulhussein Shubbar et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
An overview on rheology, mechanical properties and durability of high-volume slag used as a cement replacement in paste, mortar and concrete
Alaa M. Rashad
CONSTRUCTION AND BUILDING MATERIALS (2018)
Greenhouse gas emissions of different fly ash based geopolymer concretes in building construction
Malindu Sandanayake et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Environmental evaluation of concrete with sewage sludge ash based on LCA
Domagoj Nakic
SUSTAINABLE PRODUCTION AND CONSUMPTION (2018)
Effect of class F fly ash on the durability properties of concrete
Ashish Kumer Saha
SUSTAINABLE ENVIRONMENT RESEARCH (2018)
ReCiPe2016: a harmonised life cycle impact assessment method at midpoint and endpoint level
Mark A. J. Huijbregts et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2017)
On the selection of the functional unit in LCA of structural concrete
Snezana Marinkovic
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2017)
Performance of sustainable concretes containing very high volume Class-F fly ash and ground granulated blast furnace slag
Aliakbar Gholampour et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Life cycle sustainability assessment of fly ash concrete structures
JingJing Wang et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Overview of supplementary cementitious materials usage in lightweight aggregate concrete
Kim Hung Mo et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Utilization and efficiency of ground granulated blast furnace slag on concrete properties - A review
Erdogan Ozbay et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
A comparative cradle-to-gate life cycle assessment of three concrete mix designs
Michael W. Tait et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2016)
Environmental impacts, life cycle assessment and potential improvement measures for cement production: a literature review
Daniel Andres Salas et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Influence of the synergy between mineral additions and Portland cement in the physical-mechanical properties of ternary binders
A. Fernandez et al.
MATERIALES DE CONSTRUCCION (2016)
A review on Life Cycle Assessment, Life Cycle Energy Assessment and Life Cycle Carbon Emissions Assessment on buildings
C. K. Chau et al.
APPLIED ENERGY (2015)
Mechanical properties, durability, and life-cycle assessment of self-consolidating concrete mixtures made with blended portland cements containing fly ash and limestone powder
Kemal Celik et al.
CEMENT & CONCRETE COMPOSITES (2015)
The differences among the roles of ground fly ash in the paste, mortar and concrete
Han Fanghui et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Improving the CO2 performance of cement, part I: utilizing life-cycle assessment and key performance indicators to assess development within the cement industry
Roozbeh Feiz et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Analysis of the Optimum Usage of Slag for the Compressive Strength of Concrete
Han-Seung Lee et al.
MATERIALS (2015)
Durability of mortars containing ground granulated blast-furnace slag in acid and sulphate environment
Pawel Lukowski et al.
7TH SCIENTIFIC-TECHNICAL CONFERENCE ON MATERIAL PROBLEMS IN CIVIL ENGINEERING (MATBUD'2015) (2015)
The role of the alumina content of slag, plus the presence of additional sulfate on the hydration and microstructure of Portland cement-slag blends
Mark Whittaker et al.
CEMENT AND CONCRETE RESEARCH (2014)
Engineering properties of cementless concrete produced from GGBFS and recycled desulfurization slag
Wen-Ten Kuo et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Effect of Water-to-Binder Ratio, Air Content, and Type of Cementitious Materials on Fresh and Hardened Properties of Binary and Ternary Blended Concrete
Ezgi Yurdakul et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2014)
Cement and carbon emissions
Laurent Barcelo et al.
MATERIALS AND STRUCTURES (2014)
Assessment of the CO2 emission and cost reduction performance of a low-carbon-emission concrete mix design using an optimal mix design system
Taehyoung Kim et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)
Mechanical properties of self consolidating concrete blended with high volumes of fly ash and slag
Katherine Kuder et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Compressive strength and sulfate resistance properties of concretes containing Class F and Class C fly ashes
Mansur Sumer
CONSTRUCTION AND BUILDING MATERIALS (2012)
Impact Assessment of Ambient Air Quality by Cement Industry: A Case Study in Jordan
Mahmoud Abu-Allaban et al.
AEROSOL AND AIR QUALITY RESEARCH (2011)
Evaluation of sustainable high-volume fly ash concretes
A. Duran-Herrera et al.
CEMENT & CONCRETE COMPOSITES (2011)
Comparison on efficiency factors of F and C types of fly ashes
Hasan Yildirim et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Influence of supplementary cementitious materials on engineering properties of high strength concrete
M. A. Megat Johari et al.
CONSTRUCTION AND BUILDING MATERIALS (2011)
Measuring the eco-efficiency of cement use
Bruno L. Damineli et al.
CEMENT & CONCRETE COMPOSITES (2010)
Effect of GGBFS on time dependent compressive strength of concrete
Mohd Shariq et al.
CONSTRUCTION AND BUILDING MATERIALS (2010)
LCA allocation procedure used as an incitative method for waste recycling: An application to mineral additions in concrete
C. Chen et al.
RESOURCES CONSERVATION AND RECYCLING (2010)
European characterization factors for human health damage of PM10 and ozone in life cycle impact assessment
Rosalie van Zelm et al.
ATMOSPHERIC ENVIRONMENT (2008)
An experimental study on optimum usage of GGBS for the compressive strength of concrete
A. Oner et al.
CEMENT & CONCRETE COMPOSITES (2007)
Green house gas emissions due to concrete manufacture
David J. M. Flower et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2007)
Properties of concrete incorporating fly ash and ground granulated blast-furnace slag
GY Li et al.
CEMENT & CONCRETE COMPOSITES (2003)
The influence of mineral admixtures on the theology of cement paste and concrete
CF Ferraris et al.
CEMENT AND CONCRETE RESEARCH (2001)
Effect of admixtures on the setting times of high-strength concrete
JJ Brooks et al.
CEMENT & CONCRETE COMPOSITES (2000)
Share Paper
