Related references
Note: Only part of the references are listed.DEM analysis on the role of aggregates on concrete strength
P. Wang et al.
COMPUTERS AND GEOTECHNICS (2020)
Recycled fibers in reinforced concrete: A systematic literature review
Roberto Merli et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Flexural fatigue behaviour of recycled tyre polymer fibre reinforced concrete
Meng Chen et al.
CEMENT & CONCRETE COMPOSITES (2020)
A load induced thermal strain (LITS) semi-empirical model for plain and steel fiber reinforced concrete subjected to uniaxial compressive load
Thomaz Eduardo Teixeira Buttignol
CEMENT AND CONCRETE RESEARCH (2020)
Axial compressive behavior of confined steel fiber reinforced high strength concrete
Muhammad Usman et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Failure mechanism of silica coated polypropylene fibres for Fibre Reinforced Concrete (FRC)
Cesare Signorini et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Behavior of lightly reinforced fiber reinforced concrete panels under pure shear loading
Luca Facconi et al.
ENGINEERING STRUCTURES (2020)
Recovering full metallic resources from waste printed circuit boards: A refined review
Ruijun Qiu et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Ultrasonic evaluation of strength properties of cemented paste backfill: Effects of mineral admixture and curing temperature
Haiqiang Jiang et al.
ULTRASONICS (2020)
Fiber length effect on strength properties of polypropylene fiber reinforced cemented tailings backfill specimens with different sizes
Gaili Xue et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Mechanical properties and damping capacity of polypropylene fiber reinforced concrete modified by rubber powder
Jinxu Mo et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Reutilisation of coal gangue and fly ash as underground backfill materials for surface subsidence control
Meng Li et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Valorization of waste powders from cement-concrete life cycle: A pathway to circular future
Senthil Kumar Kaliyavaradhan et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Bromine removal from resin particles of crushed waste printed circuit boards by vacuum low-temperature heating
Jie Zhu et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Strength development and microstructure characteristics of artificial concrete pillar considering fiber type and content effects
Shuai Cao et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Effect of mineral admixtures on flow properties of fresh cemented paste backfill: Assessment of time dependency and thixotropy
Haiqiang Jiang et al.
POWDER TECHNOLOGY (2020)
A combined experimental and numerical study on the triaxial and dynamic compression behavior of cemented tailings backfill
Lei Yang et al.
ENGINEERING STRUCTURES (2020)
Assessment of Moisture Susceptibility for Asphalt Mixtures Modified by Carbon Fibers
Huda Qasim Mawat et al.
CIVIL ENGINEERING JOURNAL-TEHRAN (2020)
Comparison of different natural fiber treatments: a literature review
B. Koohestani et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2019)
Mechanical properties of fibre reinforced concrete with recycled fibres
Filip Grzymski et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Some developments and new insights of environmental problems and deep mining strategy for cleaner production in mines
Longjun Dong et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Use of an artificial crown pillar in transition from open pit to underground mining
Shuai Xu et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)
Heat evolution and energy analysis of cyanide bioproduction by a cyanogenic microorganism with the potential for bioleaching of precious metals
Zhihui Yuan et al.
JOURNAL OF HAZARDOUS MATERIALS (2019)
Influence of fiber reinforcement on mechanical behavior and microstructural properties of cemented tailings backfill
Gaili Xue et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Loading rate effect on uniaxial compressive strength behavior and acoustic emission properties of cemented tailings backfill
Shuai Cao et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Mechanical, flexural and microstructural properties of cement-tailings matrix composites: Effects of fiber type and dosage
Gaili Xue et al.
COMPOSITES PART B-ENGINEERING (2019)
Calculation of chloride ion diffusion in glass and polypropylene fiber-reinforced concrete
Jinliang Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Value-added reuse of scrap tire polymeric fibers in cement-based structural applications
Obinna Onuaguluchi et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Analysis of internal structure behavior of fiber reinforced cement-tailings matrix composites through X-ray computed tomography
Gaili Xue et al.
COMPOSITES PART B-ENGINEERING (2019)
Fiber type effect on strength, toughness and microstructure of early age cemented tailings backfill
Shuai Cao et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Mechanical, durability, and microstructural properties of macro synthetic polypropylene (PP) fiber-reinforced rubber concrete
Jiaqing Wang et al.
JOURNAL OF CLEANER PRODUCTION (2019)
How environmentally sustainable are fibre reinforced alkali-activated concretes?
Mariam Abdulkareem et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Experimental study of compressive behavior of polypropylene-fiber-reinforced and polypropylene-fiber-fabric-reinforced concrete
Yuan Qin et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Dynamic buckling mechanism of pillar rockbursts induced by stress waves
J. Deng et al.
JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2019)
Subsidence over room and pillar retreat mining in a low coal seam
Andre Zingano et al.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2019)
Optimization of room-and-pillar dimensions using automated numerical models
Gian Franco Napa-Garcia et al.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2019)
Prediction of Fiber Reinforced Concrete Strength Properties by Micromechanics Method
S. S. Kadam et al.
CIVIL ENGINEERING JOURNAL-TEHRAN (2019)
Evaluation of the probability density of inhomogeneous fiber orientations by computed tomography and its application to the calculation of the effective properties of a fiber-reinforced composite
Tatiana Mishurova et al.
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2018)
Study and discussion of short-strip coal pillar recovery with cemented paste backfill
Qiang Sun et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)
Modeling the progressive failure of hard rock pillars
H. Rafiei Renani et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2018)
Optimising the measurement of bruises in children across conventional and cross polarized images using segmentation analysis techniques in Image J, Photoshop and circle diameter measurements
C. Harris et al.
JOURNAL OF FORENSIC AND LEGAL MEDICINE (2018)
Dynamic response of cement-tailings matrix composites under SHPB compression load
Shuai Cao et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Compressive behavior and microstructural properties of tailings polypropylene fibre-reinforced cemented paste backfill
Xin Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Development and evaluation of artificial expandable pillars for hard rock mining
Yuanhui Li et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)
Compressive Strength Characteristics of Cemented Tailings Backfill with Alkali-Activated Slag
Gaili Xue et al.
APPLIED SCIENCES-BASEL (2018)
A general relationship to estimate strength of fibre-reinforced cemented fine-grained soils
N. C. Consoli et al.
GEOSYNTHETICS INTERNATIONAL (2017)
Numerical analysis of underground space and pillar design in metalliferous mine
T. Malli et al.
JOURNAL OF AFRICAN EARTH SCIENCES (2017)
Rock Bolting at the Room and Pillar Method at Great Depths
Petr Waclawik et al.
ISRM EUROPEAN ROCK MECHANICS SYMPOSIUM EUROCK 2017 (2017)
X-ray CT three-dimensional reconstruction and discrete element analysis of the cement paste backfill pore structure under uniaxial compression
Wei Sun et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Real-time observation of meso-fracture process in backfill body during mine subsidence using X-ray CT under uniaxial compressive conditions
Wei Sun et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Average vertical stress on irregular elastic pillars estimated by a function of the relative extraction ratio
T. Hauquin et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2016)
Mechanical behavior of self-compacting concrete pavements incorporating recycled tire rubber crumb and reinforced with polypropylene fiber
Saeid Hesami et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Assessment of roof stability in a room and pillar coal mine in the US using three-dimensional distinct element method
T. Sherizadeh et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2016)
A cost management model for economic sustainability and continuos improvement of mining operations
Jose A. Botin et al.
RESOURCES POLICY (2015)
An intelligent approach to predict pillar sizing in designing room and pillar coal mines
Ebrahim Ghasemi et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2014)
A practical approach for the management of resources and reserves in Small-Scale Mining
Jacopo Seccatore et al.
JOURNAL OF CLEANER PRODUCTION (2014)
A coupled thermo-hydrologic-mechanical damage model and associated application in a stability analysis on a rock pillar
L. C. Li et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2013)
Pillar strength in underground stone mines in the United States
G. S. Esterhuizen et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2011)
Establishing a sustainable mining operation: an overview
David Laurence
JOURNAL OF CLEANER PRODUCTION (2011)
Digitally quantifying cerebral hemorrhage using Photoshop® and Image J
Xian Nan Tang et al.
JOURNAL OF NEUROSCIENCE METHODS (2010)
A new method for risk assessment of pillar recovery operation
E. Ghasemi et al.
SAFETY SCIENCE (2010)