A microstructural and mechanical behavior study of heterogeneous P91 welded joint

The current work has been performed to characterize the heterogeneous P91 welded joint. The gas tungsten arc welded (GTAW) P91 welds joint has been prepared using the dissimilar Inconel 617 filler. The P91 welded plates have been subjected to post-weld normalizing and tempering (PWNT) heat treatments for varying normalizing temperature in the range of 950-1150 degrees C. To homogenize the microstructure across the welded joint, tempering has been performed at 760 degrees C for 2 h for each normalized conditions. The tensile and micmhardness tests have been conducted to determine the mechanical properties of the welded joint in as-welded and heat-treated conditions. The microstructure characterization has been performed for the weld fusion zone (WFZ) and efforts have been made to develop a relation between microstructure evolutions and mechanical behavior of the welded joint. Microstructure analysis was carried out with optical and field scanning electron microscope (FESEM). The optimum combination of strength and ductility was obtained for the sample heat-treated at 1050 degrees C for 40 min (normalized)+760 degrees C/2 h (tempering). The lower strength was obtained for the Inconel 617 filler as compared to P91 filler, while ductility obtained for Inconel 617 filler was higher than that of P91 filler.