Related references
Note: Only part of the references are listed.Experimental characterization and crystal plasticity modeling of anisotropy, tension-compression asymmetry, and texture evolution of additively manufactured Inconel 718 at room and elevated temperatures
Saeede Ghorbanpour et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Inferring Post-Necking Strain Hardening Behavior of Sheets by a Combination of Continuous Bending Under Tension Testing and Finite Element Modeling
C. M. Poulin et al.
EXPERIMENTAL MECHANICS (2020)
Experimental studies into the role of cyclic bending during stretching of dual-phase steel sheets
Camille M. Poulin et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2020)
Predicting elastic anisotropy of dual-phase steels based on crystal mechanics and microstructure
Aaron M. Cantara et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Deep drawing simulations using the finite element method embedding a multi-level crystal plasticity constitutive law: Experimental verification and sensitivity analysis
Timothy J. Barrett et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Impact of solutes on the lattice parameters and elastic stiffness coefficients of hcp Fe from first-principles calculations
Michael R. Fellinger et al.
COMPUTATIONAL MATERIALS SCIENCE (2019)
An implicit formulation of the elasto-plastic self-consistent polycrystal plasticity model and its implementation in implicit finite elements
Milovan Zecevic et al.
MECHANICS OF MATERIALS (2019)
Amorphization induced by 60° shuffle dislocation pileup against different grain boundaries in silicon bicrystal under shear
Hao Chen et al.
ACTA MATERIALIA (2019)
Over five-times improved elongation-to-fracture of dual-phase 1180 steel by continuous-bending-under-tension
Camille M. Poulin et al.
MATERIALS & DESIGN (2019)
A crystallographic extension to the Olson-Cohen model for predicting strain path dependence of martensitic transformation
Milovan Zecevic et al.
ACTA MATERIALIA (2019)
Latent hardening within the elasto-plastic self-consistent polycrystal homogenization to enable the prediction of anisotropy of AA6022-T4 sheets
Milovan Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Suppressed martensitic transformation under biaxial loading in low stacking fault energy metastable austenitic steels
E. Polatidis et al.
SCRIPTA MATERIALIA (2018)
Explicit modeling of double twinning in AZ31 using crystal plasticity finite elements for predicting the mechanical fields for twin variant selection and fracture analyses
Milan Ardeljan et al.
ACTA MATERIALIA (2018)
Elevated Temperature Effects on the Plastic Anisotropy of an Extruded Mg-4 Wt Pct Li Alloy: Experiments and Polycrystal Modeling
Marcel Risse et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Deformation Microstructure and Deformation-Induced Martensite in Austenitic Fe-Cr-Ni Alloys Depending on Stacking Fault Energy
Ye Tian et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718
Saeede Ghorbanpour et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Effect of dislocation density-twin interactions on twin growth in AZ31 as revealed by explicit crystal plasticity finite element modeling
Milan Ardeljan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Coupling elasto-plastic self-consistent crystal plasticity and implicit finite elements: Applications to compression, cyclic tension-compression, and bending to large strains
Milovan Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Modification of Olson-Cohen model for predicting stress-state dependency of martensitic transformation
M. Mansourinejad et al.
MATERIALS SCIENCE AND TECHNOLOGY (2017)
Triaxial-Stress-Induced Homogeneous Hysteresis-Free First-Order Phase Transformations with Stable Intermediate Phases
Valery I. Levitas et al.
PHYSICAL REVIEW LETTERS (2017)
Lattice instability during phase transformations under multiaxial stress: Modified transformation work criterion
Valery I. Levitas et al.
PHYSICAL REVIEW B (2017)
A numerical procedure enabling accurate descriptions of strain rate-sensitive flow of polycrystals within crystal visco-plasticity theory
Marko Knezevic et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)
Transitioning rate sensitivities across multiple length scales: Microstructure-property relationships in the Taylor cylinder impact test on zirconium
Miroslav Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Latent hardening and plastic anisotropy evolution in AA6060 aluminium alloy
M. Khadyko et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Strain rate and temperature sensitive multi-level crystal plasticity model for large plastic deformation behavior: Application to AZ31 magnesium alloy
Milan Ardeljan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Dual-phase steel sheets under cyclic tension-compression to large strains: Experiments and crystal plasticity modeling
Milovan Zecevic et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)
Interplay of microstructure defects in austenitic steel with medium stacking fault energy
C. Ullrich et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of martensitic phase transformation on the behavior of 304 austenitic stainless steel under tension
H. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
In situ observation of strain and phase transformation in plastically deformed 301 austenitic stainless steel
Yadunandan B. Das et al.
MATERIALS & DESIGN (2016)
In situ X-ray diffraction and crystal plasticity modeling of the deformation behavior of extruded Mg-Li-(Al) alloys: An uncommon tension-compression asymmetry
Martin Lentz et al.
ACTA MATERIALIA (2015)
The mechanism of bcc α′ nucleation in single hcp ε laths in the fcc γ → hcp ε → bcc α′ martensitic phase transformation
Xu-Sheng Yang et al.
ACTA MATERIALIA (2015)
Experiment and modeling to investigate the effect of stress state, strain and temperature on martensitic phase transformation in TRIP-assisted steel
Hwigeon Kim et al.
ACTA MATERIALIA (2015)
Explicit incorporation of deformation twins into crystal plasticity finite element models
Milan Ardeljan et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2015)
A study of deformation and phase transformation coupling for TRIP-assisted steels
Anxin Ma et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Spectral database solutions to elasto-viscoplasticity within finite elements: Application to a cobalt-based FCC superalloy
Miroslav Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
A dislocation density based elasto-plastic self-consistent model for the prediction of cyclic deformation: Application to AA6022-T4
Milovan Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
A study of microstructure-driven strain localizations in two-phase polycrystalline HCP/BCC composites using a multi-scale model
Milan Ardeljan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
High-Pressure Double Torsion as a Severe Plastic Deformation Process: Experimental Procedure and Finite Element Modeling
Mohammad Jahedi et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
An elasto-plastic self-consistent model with hardening based on dislocation density, twinning and de-twinning: Application to strain path changes in HCP metals
Milovan Zecevic et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effect of age hardening on the deformation behavior of an Mg-Y-Nd alloy: In-situ X-ray diffraction and crystal plasticity modeling
Martin Lentz et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
A new implementation of the spectral crystal plasticity framework in implicit finite elements
Miroslav Zecevic et al.
MECHANICS OF MATERIALS (2015)
On the relation between orientation relationships predicted by the phenomenological theory and internal twins in plate martensite
Loic Malet et al.
SCRIPTA MATERIALIA (2015)
Enhancement of orientation gradients during simple shear deformation by application of simple compression
Mohammad Jahedi et al.
JOURNAL OF APPLIED PHYSICS (2015)
A strain-rate and temperature dependent constitutive model for BCC metals incorporating non-Schmid effects: Application to tantalum-tungsten alloys
Marko Knezevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Texture evolution in two-phase Zr/Nb lamellar composites during accumulative roll bonding
Marko Knezevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Kinetics of strain-induced transformation of dispersed austenite in low-alloy TRIP steels
G. N. Haidemenopoulos et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
The critical role of grain orientation and applied stress in nanoscale twinning
Rodney J. McCabe et al.
NATURE COMMUNICATIONS (2014)
Dissecting the Mechanism of Martensitic Transformation via Atomic-Scale Observations
Xu-Sheng Yang et al.
SCIENTIFIC REPORTS (2014)
Modeling mechanical response and texture evolution of α-uranium as a function of strain rate and temperature using polycrystal plasticity
Marko Knezevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
A polycrystal plasticity model for predicting mechanical response and texture evolution during strain-path changes: Application to beryllium
Marko Knezevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Phase-field simulation of stress-induced martensitic phase transformations at large strains
Vladimir A. Levin et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)
The influence of austenite texture on the martensitic transformation of an austenitic stainless steel
P. Hilkhuijsen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Integration of self-consistent polycrystal plasticity with dislocation density based hardening laws within an implicit finite element framework: Application to low-symmetry metals
Marko Knezevic et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2013)
Anisotropic stress-strain response and microstructure evolution of textured α-uranium
Marko Knezevic et al.
ACTA MATERIALIA (2012)
Twinning and martensite in a 304 austenitic stainless steel
Y. F. Shen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Effect of stress triaxiality and Lode angle on the kinetics of strain-induced austenite-to-martensite transformation
Allison M. Beese et al.
ACTA MATERIALIA (2011)
Modeling lattice strain evolution at finite strains and experimental verification for copper and stainless steel using in situ neutron diffraction
C. J. Neil et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2010)
A dislocation-based constitutive law for pure Zr including temperature effects
I. J. Beyerlein et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels
J. Talonen et al.
ACTA MATERIALIA (2007)
Transformation mechanism of α′-martensite in an austenitic Fe-Mn-C-N alloy
L. Bracke et al.
SCRIPTA MATERIALIA (2007)
Deformation behavior and micro structure/texture evolution of an annealed 304 AISI stainless steel sheet. Experimental and micromechanical modeling
B. Petit et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2007)
Validating a polycrystal model for the elastoplastic response of magnesium alloy AZ31 using in situ neutron diffraction
S. R. Agnew et al.
ACTA MATERIALIA (2006)
A model for deformation behavior and mechanically induced martensitic transformation of metastable austenitic steel
HN Han et al.
ACTA MATERIALIA (2004)
The role of collinear interaction in dislocation-induced hardening
R Madec et al.
SCIENCE (2003)
On the stress dependence of partial dislocation separation and deformation microstructure in austenitic stainless steels
TS Byun
ACTA MATERIALIA (2003)
Large difference in the elastic properties of fcc and hcp hard-sphere crystals
S Pronk et al.
PHYSICAL REVIEW LETTERS (2003)
An affine formulation for the prediction of the effective properties of nonlinear composites and polycrystals
R Masson et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)
Influence of phase transformations on the mechanical properties of austenitic stainless steels
AA Lebedev et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2000)
Structural changes without stable intermediate state in inelastic material. Part I. General thermomechanical and kinetic approaches
VI Levitas
INTERNATIONAL JOURNAL OF PLASTICITY (2000)
Structural changes without stable intermediate state in inelastic material. Part II. Applications to displacive and diffusional-displacive phase transformations, strain-induced chemical reactions and ductile fracture
VI Levitas
INTERNATIONAL JOURNAL OF PLASTICITY (2000)
Share Paper
