Related references
Note: Only part of the references are listed.Non-Fullerene Organic Solar Cells Based on Benzo[1,2-b:4,5-b′]difuran-Conjugated Polymer with 14% Efficiency
Xueshan Li et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Prospecting technologies for photovoltaic solar energy: Overview of its technical-commercial viability
Priscila Goncalves Vasconcelos Sampaio et al.
INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)
Novel Nitrogen-Containing Heterocyclic Non-Fullerene Acceptors for Organic PhotovoltaicCells: Different End-Capping Groups Leading to a Big Difference of Power Conversion Efficiencies
Guanghao Li et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
PEDOT:PSS in Water and Toluene for Organic Devices-Technical Approach
Beata Jewloszewicz et al.
POLYMERS (2020)
Enhancement of the power conversion efficiency of organic photovoltaic cells due to Au@SiO2 core shell nanoparticles embedded into a WO3 hole transport layer
Yong Hun Lee et al.
ORGANIC ELECTRONICS (2019)
Slot-die printed non-fullerene organic solar cells with the highest efficiency of 12.9% for low-cost PV-driven water splitting
Qiang Wu et al.
NANO ENERGY (2019)
Inkjet printing of zinc oxide and P3HT:ICBA in ambient conditions for inverted bulk heterojunction solar cells
Sivakumar Ganesan et al.
OPTICAL MATERIALS (2019)
Slot-Die and Roll-to-Roll Processed Single Junction Organic Photovoltaic Cells with the Highest Efficiency
Jeongjoo Lee et al.
ADVANCED ENERGY MATERIALS (2019)
Processing-Friendly Slot-Die-Cast Nonfullerene Organic Solar Cells with Optimized Morphology
Heng Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Roll-to-roll printed stable and thickness-independent ZnO:PEI composite electron transport layer for inverted organic solar cells
Junfeng Wei et al.
SOLAR ENERGY (2019)
12.88% efficiency in doctor-blade coated organic solar cells through optimizing the surface morphology of a ZnO cathode buffer layer
Guoqi Ji et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Meniscus fabrication of halide perovskite thin films at high throughput for large area and low-cost solar panels
Xuezeng Dai et al.
INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2019)
Roll-to-roll solvent annealing of printed P3HT:ICXA devices
Andrew S. Hart et al.
RSC ADVANCES (2019)
Fabrication of Spray-Coated Semitransparent Organic Solar Cells
Moon Hee Kang et al.
IEEE JOURNAL OF THE ELECTRON DEVICES SOCIETY (2019)
Slot-die processing and encapsulation of non-fullerene based ITO-free organic solar cells and modules
E. Destouesse et al.
FLEXIBLE AND PRINTED ELECTRONICS (2019)
Roll-to-roll micro-gravure printed P3HT:PCBM organic solar cells
Hengyue Li et al.
FLEXIBLE AND PRINTED ELECTRONICS (2019)
A Sequential Slot-Die Coated Ternary System Enables Efficient Flexible Organic Solar Cells
Yifan Zhao et al.
SOLAR RRL (2019)
Silane-Capped ZnO Nanoparticles for Use as the Electron Transport Layer in Inverted Organic Solar Cells
Junfeng Wei et al.
ACS NANO (2018)
Blade-Cast Nonfullerene Organic Solar Cells in Air with Excellent Morphology, Efficiency, and Stability
Lin Zhang et al.
ADVANCED MATERIALS (2018)
Nonfullerene Tandem Organic Solar Cells with High Performance of 14.11%
Yamin Zhang et al.
ADVANCED MATERIALS (2018)
Sprayed organic photovoltaic cells and mini-modules based on chemical vapor deposited graphene as transparent conductive electrode
Luca La Notte et al.
CARBON (2018)
Screen printed PEDOT:PSS films as transparent electrode and its application in organic solar cells on opaque substrates
L. Sowjanya Pali et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2018)
Microstructural Evolution of the Thin Films of a Donor-Acceptor Semiconducting Polymer Deposited by Meniscus-Guided Coating
Leo Shaw et al.
MACROMOLECULES (2018)
A building-block approach to the development of an equivalent circuit model for organic photovoltaic cells
Elisa Sesa et al.
ORGANIC ELECTRONICS (2018)
Flexographic printing of polycarbazole-based inverted solar cells
Salima Alem et al.
ORGANIC ELECTRONICS (2018)
Efficiency enhancement of ternary blend organic photovoltaic cells with molecular glasses as guest acceptors
Tham Adhikari et al.
ORGANIC ELECTRONICS (2018)
Photovoltaic technologies: Mapping from patent analysis
Priscila Goncalves Vasconcelos Sampaio et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Boron subphthalocyanines as electron donors in outdoor lifetime monitored organic photovoltaic cells
Richard K. Garner et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)
Organic photovoltaic cells with onion-like carbon thin films as hole collection layers
Hitoshi Mizuno et al.
THIN SOLID FILMS (2018)
Functionalized Graphene Oxide Enables a High-Performance Bulk Heterojunction Organic Solar Cell with a Thick Active Layer
Cheng-Kun Lyu et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)
In Situ Characterization of the Triphase Contact Line in a Brush Coating Process: Toward the Enhanced Efficiency of Polymer Solar Cells
Cheng Guo et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Solution Processed Organic Solar Cells on Textiles
Sasikumar Arumugam et al.
IEEE JOURNAL OF PHOTOVOLTAICS (2018)
Environmentally Friendly Solvent-Processed Organic Solar Cells that are Highly Efficient and Adaptable for the Blade-Coating Method
Wenchao Zhao et al.
ADVANCED MATERIALS (2018)
Highly efficient organic photovoltaic cells fabricated by electrospray deposition using a non-halogenated solution
Kazuya Takahira et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2017)
A comparative study on the morphology of P3HT:PCBM solar cells with the addition of Fe3O4 nanoparticles by spin and rod coating methods
Wenluan Zhang et al.
JOURNAL OF NANOPARTICLE RESEARCH (2017)
Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells
Wenchao Zhao et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
Roll-to-roll micro-gravure printed large-area zinc oxide thin film as the electron transport layer for solution-processed polymer solar cells
Chujun Zhang et al.
ORGANIC ELECTRONICS (2017)
Photovoltaic solar energy: Conceptual framework
Priscila Goncalves Vasconcelos Sampaio et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)
Organic solar cells all made by blade and slot-die coating techniques
Enrique Perez-Gutierrez et al.
SOLAR ENERGY (2017)
Perovskite and Organic Solar Cells Fabricated by Inkjet Printing: Progress and Prospects
Xiaojin Peng et al.
ADVANCED FUNCTIONAL MATERIALS (2017)
Preparation of Reduced Graphene Oxide:ZnO Hybrid Cathode Interlayer Using In Situ Thermal Reduction/Annealing for Interconnecting Nanostructure and Its Effect on Organic Solar Cell
Ding Zheng et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
A combined graphene and periodic Au nanograte structure: Fundamentals and application as a flexible transparent conducting film in a flexible organic photovoltaic cell
Cheng Jin An et al.
CARBON (2016)
High Performance Organic Solar Cells Processed by Blade Coating in Air from a Benign Food Additive Solution
Long Ye et al.
CHEMISTRY OF MATERIALS (2016)
Sodium chloride methanol solution spin-coating process for bulk-heterojunction polymer solar cells
Tong-Fang Liu et al.
CHINESE PHYSICS B (2016)
Inkjet printed silver nanowire percolation networks as electrodes for highly efficient semitransparent organic solar cells
Philipp Maisch et al.
ORGANIC ELECTRONICS (2016)
Fabrication of polymer solar cells from organic nanoparticle dispersions by doctor blading or ink-jet printing
Sivaramakrishnan Sankaran et al.
ORGANIC ELECTRONICS (2016)
Fabrication of efficient graphene-doped polymer/fullerene bilayer organic solar cells in air using spin coating followed by ultrasonic vibration post treatment
Fatemeh Zabihi et al.
SUPERLATTICES AND MICROSTRUCTURES (2016)
Roll-to-Roll Coating Technology and Its Applications: A Review
Janghoon Park et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2016)
Roll-to-Roll Printed Silver Nanowire Semitransparent Electrodes for Fully Ambient Solution-Processed Tandem Polymer Solar Cells
Dechan Angmo et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Optically monitored spray coating system for the controlled deposition of the photoactive layer in organic solar cells
Doojin Vak et al.
APPLIED PHYSICS LETTERS (2015)
Inkjet printed silver nanowire network as top electrode for semi-transparent organic photovoltaic devices
Hui Lu et al.
APPLIED PHYSICS LETTERS (2015)
Fully printed organic tandem solar cells using solution-processed silver nanowires and opaque silver as charge collecting electrodes
Fei Guo et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Non-Fullerene-Acceptor-Based Bulk-Heterojunction Organic Solar Cells with Efficiency over 7%
Dan Sun et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Spray coating methods for polymer solar cells fabrication: A review
F. Aziz et al.
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2015)
R2R-printed inverted OPV modules - towards arbitrary patterned designs
M. Valimaki et al.
NANOSCALE (2015)
An efficient polymer solar cell using graphene oxide interface assembled via layer-by-layer deposition
Lingyu Zhou et al.
ORGANIC ELECTRONICS (2015)
Vertical phase separation and light-soaking effect improvements by photoactive layer spin coating initiation time control in air-processed inverted organic solar cells
Il Jeon et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)
Digital fabrication of organic solar cells by Inkjet printing using non-halogenated solvents
T. M. Eggenhuisen et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)
Dissimilar mechanism of executing hole transfer by WO3 and MoO3 nanoparticles in organic solar cells
Eung-Kyu Park et al.
THIN SOLID FILMS (2015)
Simultaneous spin-coating and solvent annealing: manipulating the active layer morphology to a power conversion efficiency of 9.6% in polymer solar cells
Zhicai He et al.
MATERIALS HORIZONS (2015)
Fully Solution-Processing Route toward Highly Transparent Polymer Solar Cells
Fei Guo et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Integrated Molecular, Interfacial, and Device Engineering towards High-Performance Non-Fullerene Based Organic Solar Cells
Yue Zang et al.
ADVANCED MATERIALS (2014)
Highly flexible and stretchable carbon nanotube network electrodes prepared by simple brush painting for cost-effective flexible organic solar cells
Da-Young Cho et al.
CARBON (2014)
Efficient inverted organic solar cells using Zn-doped titanium oxide films as electron transport layers
Shanshan Yuan et al.
ELECTROCHIMICA ACTA (2014)
Dynamics of polymer film formation during spin coating
Y. Mouhamad et al.
JOURNAL OF APPLIED PHYSICS (2014)
Fluorinated Benzoselenadiazole-Based Low-Band-Gap Polymers for High Efficiency Inverted Single and Tandem Organic Photovoltaic Cells
Ji-Hoon Kim et al.
MACROMOLECULES (2014)
Brush-painted flexible organic solar cells using highly transparent and flexible Ag nanowire network electrodes
Sin-Bi Kang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2014)
Analysis and optimization of relevant parameters of blade coating and gravure printing processes for the fabrication of highly efficient organic solar cells
A. Schneider et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2014)
Large area slot-die coated organic solar cells on flexible substrates with non-halogenated solution formulations
Florian Machui et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2014)
Inverted organic solar cells with polymer-modified fluorine-doped tin oxide as the electron-collecting electrode
Yinhua Zhou et al.
THIN SOLID FILMS (2014)
Solution-processed silver nanowires as a transparent conducting electrode for air-stable inverted organic solar cells
Myungkwan Song et al.
THIN SOLID FILMS (2014)
Comparison of Fast Roll-to-Roll Flexographic, Inkjet, Flatbed, and Rotary Screen Printing of Metal Back Electrodes for Polymer Solar Cells
Markus Hosel et al.
ADVANCED ENGINEERING MATERIALS (2013)
Spray-Coated Silver Nanowires as Top Electrode Layer in Semitransparent P3HT:PCBM-Based Organic Solar Cell Devices
Johannes Krantz et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
Spray coating fabrication of organic solar cells bypassing the limit of orthogonal solvents
Silvia Colella et al.
APPLIED PHYSICS LETTERS (2013)
High Open Circuit Voltage Solution-Processed Tandem Organic Photovoltaic Cells Employing a Bottom Cell Using a New Medium Band Gap Semiconducting Polymer
Ji-Hoon Kim et al.
CHEMISTRY OF MATERIALS (2013)
Roll-to-Roll fabrication of large area functional organic materials
Roar R. Sondergaard et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2013)
Enhanced performance of inverted organic photovoltaic cells using CNTs-TiOX nanocomposites as electron injection layer
Hong Zhang et al.
NANOTECHNOLOGY (2013)
Additives for morphology control in high-efficiency organic solar cells
Hsueh-Chung Liao et al.
MATERIALS TODAY (2013)
Concurrently pumped ultrasonic spray coating for donor: acceptor and thickness optimization of organic solar cells
Jeffrey G. Tait et al.
ORGANIC ELECTRONICS (2013)
All polymer photovoltaics: From small inverted devices to large roll-to-roll coated and printed solar cells
Yao Liu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
Organic photovoltaic modules fabricated by an industrial gravure printing proofer
Junliang Yang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
Aligned carbon nanotube webs as a replacement for indium tin oxide in organic solar cells
Kallista Sears et al.
THIN SOLID FILMS (2013)
Solution-processed bi-layer polythiophene-fullerene organic solar cells
Toon Ghoos et al.
RSC ADVANCES (2013)
Conformal coating of titanium suboxide on carbon nanotube networks by atomic layer deposition for inverted organic photovoltaic cells
Sung H. Jin et al.
CARBON (2012)
Exploring Spray-Coating Techniques for Organic Solar Cell Applications
Wanyi Nie et al.
INTERNATIONAL JOURNAL OF PHOTOENERGY (2012)
Polymer-Fullerene Miscibility: A Metric for Screening New Materials for High-Performance Organic Solar Cells
Neil D. Treat et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)
Roll-to-roll fabrication of polymer solar cells
Roar Sondergaard et al.
MATERIALS TODAY (2012)
Fully spray-coated inverted organic solar cells
Jae-Wook Kang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Investigation of non-halogenated solvent mixtures for high throughput fabrication of polymer-fullerene solar cells
Benjamin Schmidt-Hansberg et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Gravure printing inverted organic solar cells: The influence of ink properties on film quality and device performance
Monika M. Voigt et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Simultaneous multilayer formation of the polymer solar cell stack using roll-to-roll double slot-die coating from water
Thue T. Larsen-Olsen et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Simple brush-painting of flexible and transparent Ag nanowire network electrodes as an alternative ITO anode for cost-efficient flexible organic solar cells
Jong-Wook Lim et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Interface Engineering of Layer-by-Layer Stacked Graphene Anodes for High-Performance Organic Solar Cells
Yu Wang et al.
ADVANCED MATERIALS (2011)
Efficient Organic Solar Cells with Solution-Processed Silver Nanowire Electrodes
Dong-Seok Leem et al.
ADVANCED MATERIALS (2011)
ITO-free flexible inverted organic solar cell modules with high fill factor prepared by slot die coating
B. Zimmermann et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Mechanical flexibility of transparent PEDOT:PSS electrodes prepared by gravure printing for flexible organic solar cells
Chung-Ki Cho et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Effect of solution processed graphene oxide/nickel oxide bi-layer on cell performance of bulk-heterojunction organic photovoltaic
Mi Sun Ryu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Carbon nanotube network electrodes enabling efficient organic solar cells without a hole transport layer
Teresa M. Barnes et al.
APPLIED PHYSICS LETTERS (2010)
Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing
Frederik C. Krebs et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Upscaling of polymer solar cell fabrication using full roll-to-roll processing
Frederik C. Krebs et al.
NANOSCALE (2010)
Bipolaron Formation in Organic Solar Cells Observed by Pulsed Electrically Detected Magnetic Resonance
J. Behrends et al.
PHYSICAL REVIEW LETTERS (2010)
High efficiency polymer solar cells via sequential inkjet-printing of PEDOT:PSS and P3HT:PCBM inks with additives
Seung Hun Eom et al.
ORGANIC ELECTRONICS (2010)
A comparative study on the performances of small molecule organic solar cells based on CuPc/C60 and CuPc/C70
Xi Xi et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2010)
Screen-Printed Polymer:Fullerene Bulk-Heterojunction Solar Cells
Bing Zhang et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2009)
In situ monitoring the drying kinetics of knife coated polymer-fullerene films for organic solar cells
B. Schmidt-Hansberg et al.
JOURNAL OF APPLIED PHYSICS (2009)
Polymer solar cell by blade coating
Yu-Han Chang et al.
ORGANIC ELECTRONICS (2009)
Pad printing as a film forming technique for polymer solar cells
Frederik C. Krebs
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Frederik C. Krebs
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
A complete process for production of flexible large area polymer solar cells entirely using screen printing-First public demonstration
Frederik C. Krebs et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing
Frederik C. Krebs
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Preparation and characterization of nano-scale ZnO as a buffer layer for inkjet printing of silver cathode in polymer solar cells
Seung Hun Eom et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2008)
Efficient polymer solar cells fabricated by simple brush painting
Seok-Soon Kim et al.
ADVANCED MATERIALS (2007)
Bulk heterojunction organic photovoltaic based on polythiophene-polyelectrolyte carbon nanotube composites
M. Reyes-Reyes et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2007)
Transparent carbon nanotube sheets as 3-D charge collectors in organic solar cells
Ross Ulbricht et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2007)
Organic solar cells with carbon nanotube network electrodes
Michael W. Rowell et al.
APPLIED PHYSICS LETTERS (2006)
Production of large-area polymer solar cells by industrial silk screen printing, lifetime considerations and lamination with polyethyleneterephthalate
FC Krebs et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2004)
Meniscus coating: A low-cost polymer deposition method for system-on-package (SOP) substrates
SK Bhattacharya et al.
IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING (2003)