4.7 Review

Bioelectrochemical technology for recovery of silver from contaminated aqueous solution: a review

Journal

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
Volume 28, Issue 45, Pages 63480-63494

Publisher

SPRINGER HEIDELBERG
DOI: 10.1007/s11356-020-10065-y

Keywords

Silver-rich wastewater; Silver recovery; Bioelectrochemical system; Microbial fuel cell

Funding

  1. Sirindhorn International Institute of Technology (SIIT), Thammasat University, Thailand

Ask authors/readers for more resources

The study introduces a bioelectrochemical system (BES) for silver recovery from aqueous solution, which is considered as an effective and innovative method compared to traditional techniques. BES has been shown to achieve high efficiency and purity in silver recovery, while simultaneously generating electricity.
A large amount of silver-rich wastewater is generated from different industrial processes. This wastewater is not considered a waste, but a valuable source for recovery due to the precious silver (Ag). Previous studies have used traditional methods such as membrane filtration, electrolysis, chemical precipitation, electrochemical, and cementation for Ag recovery. However, many drawbacks have been reported for these techniques such as high cost, hazardous waste generation, and the needed refinement of recovered products. In this study, a bioelectrochemical system (BES) for Ag recovery from aqueous solution is introduced as an effective and innovative method, as compared with other techniques. Different types of Ag(I)-containing solutions that have been investigated in recent BES studies (e.g., Ag(+)solution, [Ag(NH3)(2)](+), [Ag(S2O3)](-), [Ag(S2O3)(2)](3-)complexes) are reported. A BES is an anaerobic system consisting of anode and cathode chambers, which are normally separated by an ion-exchange membrane. The electron flow obtained from the anodic biological oxidation of organic matter is used directly for the cathodic electrochemical reduction of Ag(I) ions. The recovered product is Ag electrodeposits, formed at the cathode surface. Several studies have reported high Ag recovery efficiency by using a BES (i.e., > 90%), with high purity of metallic silver, and simultaneous electricity production. Furthermore, a BES can be employed for a wide range of initial Ag(I) concentrations (e.g., 50-3000 mg/L). The advantages of BES technology for Ag recovery are highlighted in this study for further practical applications.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available