Related references
Note: Only part of the references are listed.Effect of machining parameters on the milling process of 2.5D C/SiC ceramic matrix composites
Xuewei Zhang et al.
MACHINING SCIENCE AND TECHNOLOGY (2020)
Preparation and formation mechanism of C/C-SiC composites using polymer-Si slurry reactive melt infiltration
Wenjian Guo et al.
CERAMICS INTERNATIONAL (2020)
Influences of clearance angle and point angle on drilling performance of 2D Cf/SiC composites using polycrystalline diamond tools
Fan Zou et al.
CERAMICS INTERNATIONAL (2020)
An investigation of carbon nanofluid minimum quantity lubrication for grinding unidirectional carbon fibre-reinforced ceramic matrix composites
Shuoshuo Qu et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Investigations on the oxidation phenomenon of SiC/SiC fabricated by high repetition frequency femtosecond laser
Zhaoyang Zhai et al.
APPLIED SURFACE SCIENCE (2020)
Investigating Minimum Quantity Lubrication in Unidirectional Cf/SiC composite grinding
Shuoshuo Qu et al.
CERAMICS INTERNATIONAL (2020)
Mechanism and feasibility of ultrasonic-assisted milling to improve the machined surface quality of 2D Cf/SiC composites
Jie Chen et al.
CERAMICS INTERNATIONAL (2020)
Transformation of fracture mechanism and damage behavior of ceramic-matrix composites during nano-scratching
Jie Chen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Experimental study on tool wear in ultrasonic vibration-assisted milling of C/SiC composites
Yang Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
An analytical approach on stochastic model for cutting force prediction in milling ceramic matrix composites
Xuewei Zhang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Influence of thermal stress on material removal of Cf_SiC composite in EDM
Xiaoming Yue et al.
CERAMICS INTERNATIONAL (2020)
Surface morphology evaluation of multi-angle 2D ultrasonic vibration integrated with nanofluid minimum quantity lubrication grinding
Teng Gao et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Experimental evaluation of surface topographies of NMQL grinding ZrO2 ceramics combining multiangle ultrasonic vibration
Dongzhou Jia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Grinding characteristics and removal mechanisms of unidirectional carbon fibre reinforced silicon carbide ceramic matrix composites
Shuoshuo Qu et al.
CERAMICS INTERNATIONAL (2019)
Influence Factors on Grinding Force in Surface Grinding of Unidirectional C/SiC Composites
Lifeng Zhang et al.
APPLIED COMPOSITE MATERIALS (2019)
Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions
Min Yang et al.
CERAMICS INTERNATIONAL (2019)
Carbon fiber reinforced ultra-high temperature ceramic matrix composites: A review
Yutaro Arai et al.
CERAMICS INTERNATIONAL (2019)
Mechanical behaviors of C/SiC pyramidal lattice core sandwich panel under in-plane compression
Yanfei Chen et al.
COMPOSITE STRUCTURES (2019)
The new challenges of machining Ceramic Matrix Composites (CMCs): Review of surface integrity
Oriol Gavalda Diaz et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)
Hole exit quality and machined surface integrity of 2D Cf/SiC composites drilled by PCD tools
Jie Chen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Rotary ultrasonic milling of C/SiC composites fabricated using chemical vapor infiltration and needling technique
Atul Babbar et al.
MATERIALS RESEARCH EXPRESS (2019)
Experimental study on milling performance of 2D C/SiC composites using polycrystalline diamond tools
Meng Hu et al.
CERAMICS INTERNATIONAL (2019)
An efficient strategy for grinding carbon fiber-reinforced silicon carbide composite using minimum quantity lubricant
H. Esmaeili et al.
CERAMICS INTERNATIONAL (2019)
A review of third generation SiC fibers and SiCf/SiC composites
Pengren Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
A Study on the Laser-Assisted Machining of Carbon Fiber Reinforced Silicon Carbide
Khulan Erdenechimeg et al.
MATERIALS (2019)
Alloys for Aeronautic Applications: State of the Art and Perspectives
Antonio Gloria et al.
METALS (2019)
The Effects of Laser Parameters and the Ablation Mechanism in Laser Ablation of C/SiC Composite
Sining Pan et al.
MATERIALS (2019)
Study of material removal mechanisms in grinding of C/SiC composites via single-abrasive scratch tests
Yuanchen Li et al.
CERAMICS INTERNATIONAL (2019)
Thermo-structural design of a Ceramic Matrix Composite wing leading edge for a re-entry vehicle
Michele Ferraiuolo et al.
COMPOSITE STRUCTURES (2019)
Fiber orientations effect on process performance for wire cut electrical discharge machining (WEDM) of 2D C/SiC composite
Wenbin He et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
On understanding the microstructure of SiC/SiC Ceramic Matrix Composites (CMCs) after a material removal process
O. Gavalda Diaz et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of machining parameter on femtosecond laser drilling processing on SiC/SiC composites
Yongsheng Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Study on minimum quantity lubrication (MQL) in grinding of carbon fiber-reinforced SiC matrix composites (CMCs)
H. Adibi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Research into the transition of material removal mechanism for C/SiC in rotary ultrasonic face machining
Songmei Yuan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
New observations of the fiber orientations effect on machinability in grinding of C/SiC ceramic matrix composite
Jinguang Du et al.
CERAMICS INTERNATIONAL (2018)
Experimental study on vibration stability in rotary ultrasonic machining of ceramic matrix composites: Cutting force variation at hole entrance
Jianjian Wang et al.
CERAMICS INTERNATIONAL (2018)
Surface topography and roughness of silicon carbide ceramic matrix composites
Shuoshuo Qu et al.
CERAMICS INTERNATIONAL (2018)
Influence of grinding fiber angles on grinding of the 2D-Cf /C-SiC composites
Qiong Liu et al.
CERAMICS INTERNATIONAL (2018)
Multi-scale thermodynamic analysis method for 2D SiC/SiC composite turbine guide vanes
Xin Liu et al.
CHINESE JOURNAL OF AERONAUTICS (2018)
Probabilistic modelling of tool unbalance during cutting of hard heterogeneous materials: A case study in Ceramic Matrix Composites (CMCs)
O. Gavalda Diaz et al.
COMPOSITES PART B-ENGINEERING (2018)
A cutting force model based on kinematics analysis for C/SiC in rotary ultrasonic face machining
Zhen Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Effect of the surface microstructure ablated by femtosecond laser on the bonding strength of EBCs for SiC/SiC composites
Zhaoyang Zhai et al.
OPTICS COMMUNICATIONS (2018)
Improved machinability of SiC/SiC ceramic matrix composite via laser-assisted micromachining
Xiangyang Dong et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Fibre-reinforced multifunctional SiC matrix composite materials
X. W. Yin et al.
INTERNATIONAL MATERIALS REVIEWS (2017)
Study on surface/subsurface breakage in ultrasonic assisted grinding of C/SiC composites
Kai Ding et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
A study on the surface grinding of 2D C/SiC composites
Qiong Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Towards understanding the cutting and fracture mechanism in Ceramic Matrix Composites
O. Gavalda Diaz et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
High-efficiency and precision cutting of glass by selective laser-assisted milling
Yusuke Ito et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)
Assessment in drilling of C/C-SiC composites using brazed diamond drills
Youqiang Xing et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Effects of tool vibration on fiber fracture in rotary ultrasonic machining of C/SiC ceramic matrix composites
Jianjian Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Influence of surface morphology on processing of C/SiC composites via femtosecond laser
Zhaoyang Zhai et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Material removal mechanism and grinding force modelling of ultrasonic vibration assisted grinding for SiC ceramics
Chen Li et al.
CERAMICS INTERNATIONAL (2017)
Occurrence and formation mechanism of surface cavity defects during orthogonal milling of CFRP laminates
Changying Wang et al.
COMPOSITES PART B-ENGINEERING (2017)
Drilling induced tearing defects in rotary ultrasonic machining of C/SiC composites
Pingfa Feng et al.
CERAMICS INTERNATIONAL (2017)
A cutting force prediction dynamic model for side milling of ceramic matrix composites C/SiC based on rotary ultrasonic machining
Songmei Yuan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Effect of energy density and feeding speed on micro-holes drilling in SiC/SiC composites by picosecond laser
Yongsheng Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Development of a cutting force prediction model based on brittle fracture for C/SiC in rotary ultrasonic facing milling
Chong Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Effect of different parameters on machining of SiC/SiC composites via pico-second laser
Weinan Li et al.
APPLIED SURFACE SCIENCE (2016)
Effect of fiber orientations on surface grinding process of unidirectional C/SiC composites
Lifeng Zhang et al.
APPLIED SURFACE SCIENCE (2016)
Improving hole exit quality in rotary ultrasonic machining of ceramic matrix composites using a compound step-taper drill
Jianjian Wang et al.
CERAMICS INTERNATIONAL (2016)
Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil
Li Benkai et al.
CHINESE JOURNAL OF AERONAUTICS (2016)
Feasibility study of the ultrasonic vibration filing of carbon fiber reinforced silicon carbide composites
Yan Wang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Advanced structural ceramics in aerospace propulsion
Nitin P. Padture
NATURE MATERIALS (2016)
Laser Assisted Milling Device: A Review
Choon-Man Lee et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2016)
Tribological behaviour of C/C-SiC composites-A review
Parshant Kumar et al.
JOURNAL OF ADVANCED CERAMICS (2016)
Research on the Rotary Ultrasonic Facing Milling of Ceramic Matrix Composites
Li Zhen et al.
9TH INTERNATIONAL CONFERENCE ON DIGITAL ENTERPRISE TECHNOLOGY - INTELLIGENT MANUFACTURING IN THE KNOWLEDGE ECONOMY ERA (2016)
Machining parameter optimization of C/SiC composites using high power picosecond laser
Ruoheng Zhang et al.
APPLIED SURFACE SCIENCE (2015)
Single fiber push-out characterization of interfacial mechanical properties in unidirectional CVI-C/SiC composites by the nano indentation technique
Lifeng Zhang et al.
APPLIED SURFACE SCIENCE (2015)
Mechanical and electromagnetic shielding properties of carbon fiber reinforced silicon carbide matrix composites
Lingqi Chen et al.
CARBON (2015)
Ultrasonic vibration-assisted machining: principle, design and application
Wei-Xing Xu et al.
ADVANCES IN MANUFACTURING (2015)
Mechanical properties of SiC/SiC composites fabricated by PIP process with a new precursor polymer
Zheng Luo et al.
CERAMICS INTERNATIONAL (2014)
Thermal shock properties of 3D-C/SiC composites prepared via polymer infiltration pyrolysis (PIP)
Xiang Yang et al.
CERAMICS INTERNATIONAL (2014)
A high-temperature radar absorbing structure: Design, fabrication, and characterization
Hao Tian et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Wear of non-segmented and segmented diamond wheels in high-speed deep grinding of carbon fibre-reinforced ceramics
Bahman Azarhoushang
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Effect of energy density and feeding speed on micro-hole drilling in C/SiC composites by picosecond laser
Yongsheng Liu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Experimental studies on drilling tool load and machining quality of C/SiC composites in rotary ultrasonic machining
Kai Ding et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Current status and recent research achievements in SiC/SiC composites
Y. Katoh et al.
JOURNAL OF NUCLEAR MATERIALS (2014)
Ultra-short pulse laser deep drilling of C/SiC composites in air
Chunhui Wang et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2013)
Ultrasonic slot machining of a silicon carbide matrix composite
Erich Bertsche et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Electrical discharge machining of ceramic matrix composites with ceramic fiber reinforcements
Chenjun Wei et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Sequence of deformation and cracking behaviours of Gallium-Arsenide during nano-scratching
Kilian Wasmer et al.
MATERIALS CHEMISTRY AND PHYSICS (2013)
Effect of load in scratch experiments on soda lime silica glass
Payel Bandyopadhyay et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2012)
Development of a novel ultrasonic unit for grinding of ceramic matrix composites
Bahman Azarhoushang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Intermittent grinding of ceramic matrix composites (CMCs) utilizing a developed segmented wheel
Taghi Tawakoli et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
An experimental study of laser-assisted machining of hard-to-wear white cast iron
S. H. Masood et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
A Review on Research and Development of Laser Assisted Turning
Kwang-Sun Kim et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2011)
Mechanisms of edge chipping in laser-assisted milling of silicon nitride ceramics
B. Yang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Integral Textile Ceramic Structures
David B. Marshall et al.
Annual Review of Materials Research (2008)
Conceptual design of the China fusion power plant FDS-II
Y. Wu
FUSION ENGINEERING AND DESIGN (2008)
Review of blanket designs for advanced fusion reactors
T. Ihli et al.
FUSION ENGINEERING AND DESIGN (2008)
Divertor conceptual designs for a fusion power plant
Prachai Norajitra et al.
FUSION ENGINEERING AND DESIGN (2008)
Review of vibration-assisted machining
D. E. Brehl et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2008)
Microscopic surface structure of C/SiC composite mirrors for space cryogenic telescopes
Keigo Enya et al.
APPLIED OPTICS (2007)
C/C-SiC composites for space applications and advanced friction systems
W Krenkel et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Rotary ultrasonic machining of ceramic matrix composites: feasibility study and designed experiments
ZC Li et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview
R Naslain
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Advanced ceramic matrix composite materials for current and future propulsion technology applications
S Schmidt et al.
ACTA ASTRONAUTICA (2004)
Technologies for thermal protection systems applied on re-usable launcher
B Behrens et al.
ACTA ASTRONAUTICA (2004)
SiC-matrix composite materials for advanced jet engines
R Naslain et al.
MRS BULLETIN (2003)
Design, fabrication, and application of thermostructural composites (TSC) like C/C, C/SiC, and SiC/SiC composites
F Christin
ADVANCED ENGINEERING MATERIALS (2002)
The EU advanced lead lithium blanket concept using SiCf/SiC flow channel inserts as electrical and thermal insulators
P Norajitra et al.
FUSION ENGINEERING AND DESIGN (2001)
Assessment of ultrasonic drilling of C/SiC composite material
H Hocheng et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)