Related references
Note: Only part of the references are listed.Low cost fabrication of microfluidic paper-based analytical devices with water-based polyurethane acrylate and their application for bacterial detection
Dong Lin et al.
SENSORS AND ACTUATORS B-CHEMICAL (2020)
Chitosan-modified nitrocellulose membrane for paper-based point-of-care testing
Rui Hua Tang et al.
CELLULOSE (2020)
Electro-kinetically driven route for highly sensitive blood pathology on a paper-based device
Naresh Kumar Mani et al.
ELECTROPHORESIS (2020)
Simple and inexpensive electrochemical paper-based analytical device for sensitive detection of Pseudomonas aeruginosa
Rafael Ferreira e Silva et al.
SENSORS AND ACTUATORS B-CHEMICAL (2020)
Parametric analysis of wax printing technique for fabricating microfluidic paper-based analytic devices (μPAD) for milk adulteration analysis
Muhammad Younas et al.
MICROFLUIDICS AND NANOFLUIDICS (2019)
Silver nanoparticles inkjet-printed flexible biosensor for rapid label-free antibiotic detection in milk
Giulio Rosati et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Fabricating Paper Based Devices Using Correction Pens
Naresh Kumar Mani et al.
SCIENTIFIC REPORTS (2019)
The global burden of pathogens and pests on major food crops
Serge Savary et al.
NATURE ECOLOGY & EVOLUTION (2019)
Laboratory filter paper from superhydrophobic to quasi-superamphiphobicity: facile fabrication, simplified patterning and smart application
Kun-Feng Liu et al.
CELLULOSE (2019)
A wearable, cotton thread/paper-based microfluidic device coupled with smartphone for sweat glucose sensing
Gang Xiao et al.
CELLULOSE (2019)
Development of fabric-based microfluidic devices by wax printing
Azadeh Nilghaz et al.
CELLULOSE (2019)
Using printer ink color to control the behavior of paper microfluidics
Joshua Potter et al.
LAB ON A CHIP (2019)
A review of methods for the detection of pathogenic microorganisms
P. Rajapaksha et al.
ANALYST (2019)
Surface-Wettability Patterning for Distributing High-Momentum Water Jets on Porous Polymeric Substrates
Uddalok Sen et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Point-of-care microfluidic devices for pathogen detection
Behzad Nasseri et al.
BIOSENSORS & BIOELECTRONICS (2018)
A novel patterning method for three-dimensional paper-based devices by using inkjet-printed water mask
Krirktakul Punpattanakul et al.
CELLULOSE (2018)
Diagnosing Invasive Candidiasis
Cornelius J. Clancy et al.
JOURNAL OF CLINICAL MICROBIOLOGY (2018)
Precise Liquid Transport on and through Thin Porous Materials
Souvick Chatterjee et al.
LANGMUIR (2018)
Peptide substrate-based inkjet printing high-throughput MMP-9 anticancer assay using fluorescence resonance energy transfer (FRET)
Jungmi Lee et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Paper-Based Microfluidic Devices: Emerging Themes and Applications
Yuanyuan Yang et al.
ANALYTICAL CHEMISTRY (2017)
Fine printing of pressure- and temperature-sensitive paints using commercial inkjet printer
Yu Matsuda et al.
SENSORS AND ACTUATORS B-CHEMICAL (2017)
Microbial Identification Using Electrochemical Detection of Metabolites
Edgar D. Goluch
TRENDS IN BIOTECHNOLOGY (2017)
Methods for the detection and identification of pathogenic bacteria: past, present, and future
Linda Varadi et al.
CHEMICAL SOCIETY REVIEWS (2017)
Paper-based chemical and biological sensors: Engineering aspects
Snober Ahmed et al.
BIOSENSORS & BIOELECTRONICS (2016)
A review on detection methods used for foodborne pathogens
B. Priyanka et al.
INDIAN JOURNAL OF MEDICAL RESEARCH (2016)
Microfluidics and microbial engineering
Songzi Kou et al.
LAB ON A CHIP (2016)
Rapid and alternative fabrication method for microfluidic paper based analytical devices
Soheil Malekghasemi et al.
TALANTA (2016)
Fully inkjet-printed microfluidics: a solution to low-cost rapid three-dimensional microfluidics fabrication with numerous electrical and sensing applications
Wenjing Su et al.
SCIENTIFIC REPORTS (2016)
Culture-Independent Rapid Detection Methods for Bacterial Pathogens and Toxins in Food Matrices
Yun Wang et al.
COMPREHENSIVE REVIEWS IN FOOD SCIENCE AND FOOD SAFETY (2016)
A simple method for patterning poly(dimethylsiloxane) barriers in paper using contact-printing with low-cost rubber stamps
Karina Lopes Dornelas et al.
ANALYTICA CHIMICA ACTA (2015)
Paper-Based Inkjet-Printed Microfluidic Analytical Devices
Kentaro Yamada et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)
Dynamics of water imbibition through paper channels with wax boundaries
Seokbin Hong et al.
MICROFLUIDICS AND NANOFLUIDICS (2015)
Invasive Candidiasis
Bart Jan Kullberg et al.
NEW ENGLAND JOURNAL OF MEDICINE (2015)
Antimicrobial resistance: a global multifaceted phenomenon
Francesca Prestinaci et al.
PATHOGENS AND GLOBAL HEALTH (2015)
Rapid methods for the detection of foodborne bacterial pathogens: principles, applications, advantages and limitations
Jodi Woan-Fei Law et al.
FRONTIERS IN MICROBIOLOGY (2015)
The Fluid Diode: Tunable Unidirectional Flow through Porous Substrates
Joseph E. Mates et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Paper-Based Microfluidics: Fabrication Technique and Dynamics of Capillary-Driven Surface Flow
Joel Songok et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
One-step polymer screen-printing for microfluidic paper-based analytical device (μPAD) fabrication
Yupaporn Sameenoi et al.
ANALYST (2014)
Hydrophobic sol-gel channel patterning strategies for paper-based microfluidics
Jingyun Wang et al.
LAB ON A CHIP (2014)
Inkjet patterned superhydrophobic paper for open-air surface microfluidic devices
Mohamed Elsharkawy et al.
LAB ON A CHIP (2014)
Electrochromatographic separations of multi-component metal complexes on a microfluidic paper-based device with a simplified photolithography
Liangfei OuYang et al.
RSC ADVANCES (2014)
Method for Fabrication of Paper-Based Microfluidic Devices by Alkylsilane Self-Assembling and UV/O3-Patterning
Qiaohong He et al.
ANALYTICAL CHEMISTRY (2013)
Spatially controlled DNA unzipping by microfluidic interface positioning on a molecule perpendicular to a multicomponent flow
Naresh K. Mani et al.
CHEMICAL COMMUNICATIONS (2013)
Candida albicans pathogenicity mechanisms
Francois L. Mayer et al.
VIRULENCE (2013)
Vapor Phase Deposition of Functional Polymers onto Paper-Based Microfluidic Devices for Advanced Unit Operations
Philip Kwong et al.
ANALYTICAL CHEMISTRY (2012)
Fully Enclosed Microfluidic Paper-Based Analytical Devices
Kevin M. Schilling et al.
ANALYTICAL CHEMISTRY (2012)
A perspective on paper-based microfluidics: Current status and future trends
Xu Li et al.
BIOMICROFLUIDICS (2012)
A low-cost, simple, and rapid fabrication method for paper-based microfluidics using wax screen-printing
Wijitar Dungchai et al.
ANALYST (2011)
Microfluidic Devices for Bioapplications
Leslie Y. Yeo et al.
SMALL (2011)
Three-dimensional patterning of porous materials using vapor phase polymerization
Patrick D. Haller et al.
SOFT MATTER (2011)
Novel, simple and low-cost alternative method for fabrication of paper-based microfluidics by wax dipping
Temsiri Songjaroen et al.
TALANTA (2011)
Flexographically Printed Fluidic Structures in Paper
Juuso Olkkonen et al.
ANALYTICAL CHEMISTRY (2010)
Fabrication of paper-based microfluidic sensors by printing
Xu Li et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2010)
Understanding Wax Printing: A Simple Micropatterning Process for Paper-Based Microfluidics
Emanuel Carrilho et al.
ANALYTICAL CHEMISTRY (2009)
Rapid prototyping of paper-based microfluidics with wax for low-cost, portable bioassay
Yao Lu et al.
ELECTROPHORESIS (2009)
Inkjet-printed microfluidic multianalyte chemical sensing paper
Koji Abe et al.
ANALYTICAL CHEMISTRY (2008)
Paper-Based Microfluidic Devices by Plasma Treatment
Xu Li et al.
ANALYTICAL CHEMISTRY (2008)
Pathogen detection:: A perspective of traditional methods and biosensors
Olivier Lazcka et al.
BIOSENSORS & BIOELECTRONICS (2007)