Related references
Note: Only part of the references are listed.Hydraulic stimulation and fluid circulation experiments in underground laboratories: Stepping up the scale towards engineered geothermal systems
Valentin S. Gischig et al.
GEOMECHANICS FOR ENERGY AND THE ENVIRONMENT (2020)
A combined thermo-mechanical drilling technology for deep geothermal and hard rock reservoirs
Edoardo Rossi et al.
GEOTHERMICS (2020)
Field test of a Combined Thermo -Mechanical Drilling technology. Mode I: Thermal spallation drilling
Edoardo Rossi et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2020)
Field test of a Combined Thermo-Mechanical Drilling technology. Mode II: Flame-assisted rotary drilling
Edoardo Rossi et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2020)
Effects of thermal shock due to rapid cooling on the mechanical properties of sandstone
Guansheng Han et al.
ENVIRONMENTAL EARTH SCIENCES (2019)
On the tensile mechanical characteristics of fine-grained granite after heating/cooling treatments with different cooling rates
Qiuhong Wu et al.
ENGINEERING GEOLOGY (2019)
Effect of Heating Rate on the Dynamic Compressive Properties of Granite
Ronghua Shu et al.
GEOFLUIDS (2019)
Dissolution and Thermal Spallation of Barre Granite Using Pure Water Hydrothermal Jets
Ivan Beentjes et al.
ROCK MECHANICS AND ROCK ENGINEERING (2019)
Demonstration of thermal borehole enlargement to facilitate controlled reservoir engineering for deep geothermal, oil or gas systems
Michael A. Kant et al.
APPLIED ENERGY (2018)
Effects of specimen size and thermal-damage on physical and mechanical behavior of a fine-grained marble
Guan Rong et al.
ENGINEERING GEOLOGY (2018)
Drilling data from an enhanced geothermal project and its pre-processing for ROP forecasting improvement
Melvin B. Diaz et al.
GEOTHERMICS (2018)
Experimental investigation of thermomechanical behaviour of clay-rich sandstone at extreme temperatures followed by cooling treatments
T. D. Rathnaweera et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)
The Effects of High Heating Rate and High Temperature on the Rock Strength: Feasibility Study of a Thermally Assisted Drilling Method
Edoardo Rossi et al.
ROCK MECHANICS AND ROCK ENGINEERING (2018)
Thermal Cracking in Westerly Granite Monitored Using Direct Wave Velocity, Coda Wave Interferometry, and Acoustic Emissions
L. Griffiths et al.
JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2018)
Insights into the radial water jet drilling technology - Application in a quarry
Thomas Reinsch et al.
JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2018)
The seismo-hydromechanical behavior during deep geothermal reservoir stimulations: open questions tackled in a decameter-scale in situ stimulation experiment
Florian Amann et al.
SOLID EARTH (2018)
Temperature-dependent mechanical behaviour of Australian Strathbogie granite with different cooling treatments
W. G. P. Kumari et al.
ENGINEERING GEOLOGY (2017)
Quantification of microcrack characteristics and implications for stiffness and strength of granite
L. Griffiths et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2017)
Mechanical specific energy versus depth of cut in rock cutting and drilling
Yaneng Zhou et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2017)
Frictional behaviour of sandstone: A sample-size dependent triaxial investigation
Hamid Roshan et al.
JOURNAL OF STRUCTURAL GEOLOGY (2017)
Experimental Study on Longmaxi Shale Breaking Mechanism with Micro-PDC Bit
Teng Wang et al.
ROCK MECHANICS AND ROCK ENGINEERING (2017)
A theory on thermal spalling of rocks with a focus on thermal spallation drilling
Michael A. Kant et al.
JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2017)
Mechanically Assisted Thermal Type LaserJet Process for Deep Hard Rock Drilling
S. Jamali et al.
OIL GAS-EUROPEAN MAGAZINE (2017)
Evolution of thermal damage and permeability of Beishan granite
Shiwan Chen et al.
APPLIED THERMAL ENGINEERING (2017)
Specific Energy as an Index to Identify the Critical Failure Mode Transition Depth in Rock Cutting
Xianqun He et al.
ROCK MECHANICS AND ROCK ENGINEERING (2016)
Thermal stress-induced microcracking in building granite
D. M. Freire-Lista et al.
ENGINEERING GEOLOGY (2016)
Modeling fluid pressure effects when cutting saturated rock
R. L. J. Helmons et al.
ENGINEERING GEOLOGY (2016)
Cooling-dominated cracking in thermally stressed volcanic rocks
John Browning et al.
GEOPHYSICAL RESEARCH LETTERS (2016)
Chipping and crushing mechanisms in orthogonal rock cutting
Demeng Che et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)
Rock Drilling Performance Evaluation by an Energy Dissipation Based Rock Brittleness Index
H. Munoz et al.
ROCK MECHANICS AND ROCK ENGINEERING (2016)
Effects of rock water content on CERCHAR Abrasivity Index
M. Z. Abu Bakar et al.
WEAR (2016)
An experimental study on the physico-mechanical properties of two post-high-temperature rocks
Shi Liu et al.
ENGINEERING GEOLOGY (2015)
Estimating cost and time of wellbore drilling for Engineered Geothermal Systems (EGS) - Considering uncertainties
Keith Yost et al.
GEOTHERMICS (2015)
Saturated heating and quenching of three crustal rocks and implications for thermal stimulation of permeability in geothermal reservoirs
Paul A. Siratovich et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)
Permeability and thermal cracking at pressure in Sioux Quartzite
Gunter Siddiqi et al.
ROCK DEFORMATION FROM FIELD, EXPERIMENTS AND THEORY: A VOLUME IN HONOUR OF ERNIE RUTTER (2015)
DOES THE BUSINESS JUDGMENT RULE HELP PROMOTE CORPORATE SOCIAL RESPONSIBILITY?
Giulia Neri-Castracane
FRONTIERS OF LAW IN CHINA (2015)
Effect of cooling rate on the mechanical behavior of heated Strathbogie granite with different grain sizes
Shishi Shao et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2014)
Cost analysis of oil, gas, and geothermal well drilling
Maciej Z. Lukawski et al.
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2014)
Continuous Monitoring of Pin Tip Wear and Penetration into Rock Surface Using a New Cerchar Abrasivity Testing Device
Mohammad-Taghi Hamzaban et al.
ROCK MECHANICS AND ROCK ENGINEERING (2014)
ISRM Suggested Method for Determining the Abrasivity of Rock by the CERCHAR Abrasivity Test
Michael Alber et al.
ROCK MECHANICS AND ROCK ENGINEERING (2014)
Study of Dominant Factors Affecting Cerchar Abrasivity Index
Jamal Rostami et al.
ROCK MECHANICS AND ROCK ENGINEERING (2014)
Effect of Rapid Thermal Cooling on Mechanical Rock Properties
Kwangmin Kim et al.
ROCK MECHANICS AND ROCK ENGINEERING (2014)
Analysis of fluid injection-induced fault reactivation and seismic slip in geothermal reservoirs
Quan Gan et al.
JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2014)
Clay nanoparticles modified drilling fluids for drilling of deep hydrocarbon wells
J. Abdo et al.
APPLIED CLAY SCIENCE (2013)
Discrete element modeling of tool-rock interaction I: rock cutting
H. Huang et al.
INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2013)
More Power from Below
Joseph N. Moore et al.
SCIENCE (2013)
Trend and progress in global oil and gas exploration
Hu Wenrui et al.
PETROLEUM EXPLORATION AND DEVELOPMENT (2013)
Rock strength determination from scratch tests
Thomas Richard et al.
ENGINEERING GEOLOGY (2012)
Transformation plasticity and the effect of temperature on the mechanical behaviour of Hawkesbury sandstone at atmospheric pressure
P. G. Ranjith et al.
ENGINEERING GEOLOGY (2012)
Issues in Polycrystalline Diamond Compact Cutter-Rock Interaction From a Metal Machining Point of View-Part II: Bit Performance and Rock Cutting Mechanics
Demeng Che et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2012)
Drilling Action of Roller-Cone Bits: Modeling and Experimental Validation
Luiz F. P. Franca
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2010)
Estimating Drilling Parameters for Diamond Bit Drilling Operations Using Artificial Neural Networks
Serhat Akin et al.
INTERNATIONAL JOURNAL OF GEOMECHANICS (2008)
Testing conditions and geomechanical properties influencing the CERCHAR abrasiveness index (CAI) value
R Plinninger et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2003)
Permanent strain of thermal expansion and thermally induced microcracking in Inada granite
WR Lin
JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2002)
Geothermal energy technology and current status: an overview
E Barbier
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2002)
The microscopic origin of thermal cracking in rocks: An investigation by simultaneous time-of-flight neutron diffraction and acoustic emission monitoring
PG Meredith et al.
GEOPHYSICAL RESEARCH LETTERS (2001)
Share Paper
