Related references
Note: Only part of the references are listed.Hip simulator testing of the taper-trunnion junction and bearing surfaces of contemporary metal-on-cross-linked-polyethylene hip prostheses
Rohan M. Bhalekar et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2020)
Analysis of the high-temperature dry sliding behavior of CoCrFeNiTi0.5Alx high-entropy alloys
Azmi Erdogan et al.
FRICTION (2020)
Cavitation erosion resistance of ZrC nanoceramic coating
Hongqin Ding et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2020)
Analysis of the application of ZrN coatings for the mitigation of the development of fretting wear processes at the surfaces of push fit joint elements
Slawomir Kowalski et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2020)
Mechanism of atomic and close-to-atomic scale cutting of monocrystalline copper
Wenkun Xie et al.
APPLIED SURFACE SCIENCE (2020)
Oil-soluble ionic liquids as antiwear and extreme pressure additives in poly-α-olefin for steel/steel contacts
Guowei Huang et al.
FRICTION (2019)
Efficacy of toothpastes in the prevention of erosive tooth wear in permanent and deciduous teeth
Cristiane Meira Assuncao et al.
CLINICAL ORAL INVESTIGATIONS (2019)
Experimental investigation of EHD grease lubrication in finite line contacts
Zhijian Wang et al.
FRICTION (2019)
Water-based superlubricity in vacuum
Chen Xiao et al.
FRICTION (2019)
Tribological application and mechanism of epicuticular wax
Xuwen Zhong et al.
FRICTION (2019)
Tribological behavior of coated spur gear pairs with tooth surface roughness
Huaiju Liu et al.
FRICTION (2019)
Significant friction reduction of high-intensity pulsed ion beam irradiated WC-Ni against graphite under water lubrication
Gaolong Zhang et al.
FRICTION (2019)
Numerical analysis of time-varying wear with elastic deformation in line contact
Wanglong Zhan et al.
FRICTION (2019)
On the influence of Streptococcus salivarius on the wear response of dental implants: An in vitro study
Celio G. Figueiredo-Pina et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2019)
Tribological and mechanical properties of MoS2 enhanced polyamide 12 for selective laser sintering
Jiaming Bai et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Facile pyrolysis synthesis of ionic liquid capped carbon dots and subsequent application as the water-based lubricant additives
Weiwei Tang et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Aging-related changes in quantity and quality of saliva: Where do we stand in our understanding?
Feng Xu et al.
JOURNAL OF TEXTURE STUDIES (2019)
Suitability of developed composite materials for meniscal replacement: Mechanical, friction and wear evaluation
Adijat Omowumi Inyang et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)
Prediction of Surface Wear of Involute Gears Based on a Modified Fractal Method
G. Li et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2019)
A Mixed-TEHL Analysis of Cam-Roller Contacts Considering Roller Slip: On the Influence of Roller-Pin Contact Friction
Shivam S. Alakhramsing et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2019)
Finite element analysis of fretting wear considering variable coefficient of friction
Ling Li et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2019)
Fabrication of GNS/MoS2 composite with different morphology and its tribological performance as a lubricant additive
Wei Song et al.
APPLIED SURFACE SCIENCE (2019)
Friction performance and mechanisms of calcined products of Mg/Al layered double hydroxides as lubricant additives
Shuo Li et al.
APPLIED SURFACE SCIENCE (2019)
Effects of grain boundary on wear of graphene at the nanoscale: A molecular dynamics study
Jie Zhang et al.
CARBON (2019)
Friction reduction of water based lubricant with highly dispersed functional MoS2 nanosheets
Yongxia Wang et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2019)
3D finite element study of the fatigue damage of Ti-6Al-4V in presence of fretting wear
S. Basseville et al.
COMPUTATIONAL MECHANICS (2019)
A new approach for analyzing the temperature rise and heat partition at the interface of coated tool tip-sheet incremental forming systems
Xin Zhang et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Interlayer interaction on twisted interface in incommensurate stacking MoS2: A Raman spectroscopy study
Xiang Zhou et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)
Friction and scratch characteristics of textured and rough surfaces using the quasi-continuum method
Anh-Son Tran et al.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2019)
Influence of contact configuration and lubricating conditions on the microtriboactivity of the zirconia-Ti6Al4V pair used in dental applications
A. C. Branco et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)
Micropitting Fatigue Wear Simulation in Conformal-Contact Under Mixed Elastohydrodynamic Lubrication
Hang Jia et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2019)
Influence of Oxidation on the High-Temperature Tribological Properties of Tungsten-Carbide-Reinforced Cu-Ni-Mn Composite Coatings
Shuai Yang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2019)
Probing van der Waals interactions at two-dimensional heterointerfaces
Baowen Li et al.
NATURE NANOTECHNOLOGY (2019)
Thermo-tribological behaviour of microgels for improved aqueous lubrication for steel/UHMWPE contact
Yufu Xu et al.
TRIBOLOGY INTERNATIONAL (2019)
Preparation and tribological properties of WS2 and WS2/TiO2 nanoparticles
Ziyan Lu et al.
TRIBOLOGY INTERNATIONAL (2019)
Friction force evaluation for grasping in minimally invasive surgery
Mithat Can Ozin et al.
TRIBOLOGY INTERNATIONAL (2019)
Layered oil slip model for investigation of film thickness behaviours at high speed conditions
Yaoguang Zhang et al.
TRIBOLOGY INTERNATIONAL (2019)
Crucial role of solid body temperature on elastohydrodynamic film thickness and traction
H. C. Liu et al.
TRIBOLOGY INTERNATIONAL (2019)
A simple deterministic plastoelastohydrodynamic lubrication (PEHL) model in mixed lubrication
Abdullah Azam et al.
TRIBOLOGY INTERNATIONAL (2019)
Boundary slippage modeling and optimization of hydrophobic tilting pad thrust bearing with elastic deformation
B. Zhu et al.
TRIBOLOGY INTERNATIONAL (2019)
The Formation of a Modified Surface Layer on Elastomeric Materials
M. Khafidh et al.
TRIBOLOGY LETTERS (2019)
WearGP: A computationally efficient machine learning framework for local erosive wear predictions via nodal Gaussian processes
Anh Tran et al.
WEAR (2019)
Prediction of rail non-uniform wear - Influence of track random irregularity
Yu Sun et al.
WEAR (2019)
Recent advances in friction and lubrication of graphene and other 2D materials: Mechanisms and applications
Lincong Liu et al.
FRICTION (2019)
Double Network Hydrogels that Mimic the Modulus, Strength, and Lubricity of Cartilage
A. Kristen Means et al.
BIOMACROMOLECULES (2019)
Anticorrosion and lubricating properties of a fully green lubricant
Dongdong Zheng et al.
TRIBOLOGY INTERNATIONAL (2019)
Influence of molecular structure on lubrication of aqueous triblock copolymer lubricants between rutile surfaces: An MD approach
T. D. Ta et al.
TRIBOLOGY INTERNATIONAL (2019)
Joint contact areas after radial head arthroplasty: a comparative study of 3 prostheses
Fabian G. P. Moungondo et al.
JOURNAL OF SHOULDER AND ELBOW SURGERY (2019)
A wear model for subrough surface contacts of martensitic steels
Anatoliy G. Suslov et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2019)
Performance analysis of cryogenically treated plus tempered carbide inserts in turning of Inconel 718 using cryogenic minimum quantity lubrication cooling technique
Venkat Pradeep Allu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2019)
Tribological performances of graphite-MoS2 coating at various high temperatures
Huali Han et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2019)
Modelling tribochemistry in the mixed lubrication regime
Abdullah Azam et al.
TRIBOLOGY INTERNATIONAL (2019)
High temperature solid-lubricating materials: A review
Shengyu Zhu et al.
TRIBOLOGY INTERNATIONAL (2019)
Probing fretting behavior of Mg-Sn-Y alloy under high-performance fluids lubrication
Zhenjie Huang et al.
TRIBOLOGY INTERNATIONAL (2019)
Tribology of Selected Hard Coatings for Oil and Gas Applications Up to 450°C
Reza Gheisari et al.
TRIBOLOGY LETTERS (2019)
Numerical Study of the Effect of Tribofilm Kinetics and Its Hardness on the Roughness Evolution of the Substrate in Boundary Lubrication Regime
Ali Ghanbarzadeh et al.
TRIBOLOGY TRANSACTIONS (2019)
Microstructure and Tribological Performance of Laser-Cladded Ni60+h-BN Coatings on Ti-6Al-4V Alloy at High Temperature
Dan Zhang et al.
TRIBOLOGY TRANSACTIONS (2019)
Numerical-experimental study on polishing of silicon wafer using magnetic abrasive finishing process
Mohammad Mosavat et al.
WEAR (2019)
Monitoring and modelling of false brinelling for railway bearings
Khosro Fallahnezhad et al.
WEAR (2019)
Effects of cosmetic treatments on the morphology, biotribology and sensorial properties of a single human hair fiber
C. Thieulin et al.
WEAR (2019)
Solid particle erosion of refractories: A critical discussion of two test standards
Markus Varga et al.
WEAR (2019)
Solid particle erosion in gradual contraction geometry for a gas-solid system
Farzin Darihaki et al.
WEAR (2019)
Fretting wear of alloy steels at the blade tip of steam turbines
M. Lavella et al.
WEAR (2019)
Study on the abrasive wear behavior of laser shock peening Ti-6Al-4V titanium alloy under controlled cycling impact
Yu Lin et al.
WEAR (2019)
Experiments and CFD simulations of erosion of a 90° elbow in liquid-dominated liquid-solid and dispersed-bubble-solid flows
Thiana A. Sedrez et al.
WEAR (2019)
A multiscale-approach for wear prediction in journal bearing systems - from wearing-in towards steady-state wear
Florian Koenig et al.
WEAR (2019)
Effect of recovery treatment on the wear resistance of surface hammered AZ31 Mg alloy
Qingda Li et al.
WEAR (2019)
Tool wear and chip morphology in high-speed milling of hardened Inconel 718 under dry and cryogenic CO2 conditions
N. H. A. Halim et al.
WEAR (2019)
Multiscale modelling of train-track interaction phenomena with focus on contact mechanics
Anders Ekberg et al.
WEAR (2019)
Assessment of non-Hertzian wheel-rail contact models for numerical simulation of rail damages in switch panel of railway turnout
Xiaochuan Ma et al.
WEAR (2019)
Articular Cartilage-Inspired Surface Functionalization for Enhanced Lubrication
Yixin Wang et al.
ADVANCED MATERIALS INTERFACES (2019)
Subsurface damage and material removal of Al-Si bilayers under high-speed grinding using molecular dynamics (MD) simulation
Qiong Wang et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2019)
Influence of WS2 content on high temperature wear performance of magnetron sputtered TiN-WSx thin films
E. C. Serra et al.
CERAMICS INTERNATIONAL (2019)
Preservation of the frictional properties of h-BN under chemical modification in the presence of a commensurate Ni(111) substrate
Yuan Ma et al.
COMPUTATIONAL MATERIALS SCIENCE (2019)
A Fourier-accelerated volume integral method for elastoplastic contact
Lucas Frerot et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Origin of Nanoscale Friction Contrast between Supported Graphene, MoS2, and a Graphene/MoS2 Heterostructure
Mohammad R. Vazirisereshk et al.
NANO LETTERS (2019)
A coupled crack initiation and propagation numerical procedure for combined fretting wear and fretting fatigue lifetime assessment
I Llavori et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
Potential for using the ANN-FIS meta-model approach to assess levels of particulate contamination in oil used in mechanical systems
David Valis et al.
TRIBOLOGY INTERNATIONAL (2019)
Thermohydrodynamic lubrication analysis of misaligned journal bearing considering the axial movement of journal
Biao Li et al.
TRIBOLOGY INTERNATIONAL (2019)
Numerical thermal analysis of grease-lubrication in limited line contacts considering asperity contact
Kaifeng Zhang et al.
TRIBOLOGY INTERNATIONAL (2019)
Effect of spherical-convex surface texture on tribological performance of water-lubricated bearing
Dong Hu et al.
TRIBOLOGY INTERNATIONAL (2019)
Elastomers' wear: Comparison of theory with experiment
F. Hakami et al.
TRIBOLOGY INTERNATIONAL (2019)
The elastic-plastic contact behavior of rough surfaces with hard coatings
Z. Chen et al.
TRIBOLOGY INTERNATIONAL (2019)
Understanding galling wear initiation and progression using force and acoustic emissions sensors
Vignesh V. Shanbhag et al.
WEAR (2019)
Dynamic changes of mechanical properties induced by friction in the Archard wear model
Yanfei Liu et al.
WEAR (2019)
Adhesion-fatigue dual mode wear model for fractal surfaces in AISI 1045 cylinder-plane contact pairs
Wenjun Gong et al.
WEAR (2019)
Online wear characterisation of rolling element bearing using wear particle morphological features
Yeping Peng et al.
WEAR (2019)
Application of surface replication combined with image analysis to investigate wear evolution on gear teeth - A case study
Haichuan Chang et al.
WEAR (2019)
Case study: Discrete element modeling of wear in mining hoppers
Eduardo Rojas et al.
WEAR (2019)
FVPM numerical simulation of the effect of particle shape and elasticity on impact erosion
Sebastian Leguizamon et al.
WEAR (2019)
Molecular behaviors in thin film lubrication-Part one: Film formation for different polarities of molecules
Shaohua Zhang et al.
FRICTION (2019)
Molecular behaviors in thin film lubrication-Part two: Direct observation of the molecular orientation near the solid surface
Ming Gao et al.
FRICTION (2019)
Effect of adhesion on material removal during adhesive wear
Ramin Aghababaei
PHYSICAL REVIEW MATERIALS (2019)
The effect of pre-oxidation on microstructure, mechanical properties and high-temperature tribological behaviors of HVOF-sprayed NiCoCrAlYTa coating
Enkang Hao et al.
APPLIED SURFACE SCIENCE (2019)
Insights into the atomistic behavior in diamond chemical mechanical polishing with •OH environment using ReaxFF molecular dynamics simulation
Zhuoying Shi et al.
COMPUTATIONAL MATERIALS SCIENCE (2019)
Finite element analysis of polyethylene wear in total hip replacement: A literature review
Lin Wang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2019)
An atomic-level understanding of the friction and wear behaviors of Ti2AlN/TiAl composite via MD simulations
Xiuli Han et al.
TRIBOLOGY INTERNATIONAL (2019)
Surface topography and friction coefficient evolution during sliding wear in a mixed lubricated rolling-sliding contact
Xin Pei et al.
TRIBOLOGY INTERNATIONAL (2019)
Wear numerical assessment for partial slip fretting fatigue conditions
R. A. Cardoso et al.
TRIBOLOGY INTERNATIONAL (2019)
Numerical and Experimental Analysis of the Honing Texture on the Lubrication Performance of Piston Ring-Cylinder Liner Tribosystem
Tongyang Li et al.
TRIBOLOGY TRANSACTIONS (2019)
FECNN: A promising model for wear particle recognition
Peng Peng et al.
WEAR (2019)
Wear of additively manufactured tool steel in contact with aluminium alloy
E. Huttunen-Saarivirta et al.
WEAR (2019)
Semi-analytic modelling of transversely isotropic magneto-electro-elastic materials under frictional sliding contact
Haibo Zhang et al.
APPLIED MATHEMATICAL MODELLING (2019)
Atomistic Insights into Cu Chemical Mechanical Polishing Mechanism in Aqueous Hydrogen Peroxide and Glycine: ReaxFF Reactive Molecular Dynamics Simulations
Jialin Wen et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2019)
Synthesis of water-soluble Cu nanoparticles and evaluation of their tribological properties and thermal conductivity as a water-based additive
Junhua Zhao et al.
FRICTION (2019)
Nanoscratching of metallic glasses - An atomistic study
Karina E. Avila et al.
TRIBOLOGY INTERNATIONAL (2019)
Coupling transient mixed lubrication and wear for journal bearing modeling
Guo Xiang et al.
TRIBOLOGY INTERNATIONAL (2019)
Triple Function Lubricant Additives Based on Organic-Inorganic Hybrid Star Polymers: Friction Reduction, Wear Protection, and Viscosity Modification
Bas G. P. van Ravensteijn et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Superlubricity and Antiwear Properties of In Situ-Formed Ionic Liquids at Ceramic Interfaces Induced by Tribochemical Reactions
Xiangyu Ge et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
A Schur-complement model-order-reduction technique for the finite element solution of transient elastohydrodynamic lubrication problems
W. Habchi
ADVANCES IN ENGINEERING SOFTWARE (2019)
An earthworm-inspired friction-controlled soft robot capable of bidirectional locomotion
Joey Z. Ge et al.
BIOINSPIRATION & BIOMIMETICS (2019)
Wear properties of esthetic dental materials against translucent zirconia
Shota Hayashi et al.
DENTAL MATERIALS JOURNAL (2019)
Prediction model of tool wear volume in precision turning of ceramic particle reinforced aluminum matrix composites
H. Z. Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Solid Particle Erosion on Shield Surface of a Helicopter Rotor Blade Using Computational Fluid Dynamics
Ismail Ozen et al.
JOURNAL OF AEROSPACE ENGINEERING (2019)
Fabrication and tribological properties of oil-soluble MoS2 nanosheets decorated by oleic diethanolamide borate
Pei-Rong Wu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Alkyl phosphate modified graphene oxide as friction and wear reduction additives in oil
Lei Zhang et al.
JOURNAL OF MATERIALS SCIENCE (2019)
Antagonist enamel wear of tooth-supported monolithic zirconia posterior crowns in vivo: A systematic review
Min Gou et al.
JOURNAL OF PROSTHETIC DENTISTRY (2019)
Enamel wear and aging of translucent zirconias: In vitro and clinical studies
Seung-Won Yang et al.
JOURNAL OF PROSTHETIC DENTISTRY (2019)
A Thermal Elastohydrodynamic Lubrication Model for Crowned Rollers and Its Application on Apex Seal-Housing Interfaces
Zhong Liu et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2019)
Numerical Running-In Method for Modifying Cylindrical Roller Profile Under Mixed Lubrication of Finite Line Contacts
Yazhao Zhang et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2019)
A finite element simulation of MOM (metal-on-metal) hip implant
Sumita Chaturvedi et al.
LUBRICATION SCIENCE (2019)
Tribology of two-dimensional materials: From mechanisms to modulating strategies
Shuai Zhang et al.
MATERIALS TODAY (2019)
Effects of implant orientation and implant material on tibia bone strain, implant-bone micromotion, contact pressure, and wear depth due to total ankle replacement
Subrata Mondal et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2019)
Lubrication performance of planar thrust bearing with consideration of roughness of the surfaces
Shanshan Li et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2019)
The effect of surgical alignment and soft tissue conditions on the kinematics and wear of a fixed bearing total knee replacement
Helena Johnston et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)
Hydro-abrasive erosion in Pelton turbine injectors: A numerical study
Gianandrea Vittorio Messa et al.
RENEWABLE ENERGY (2019)
Fretting friction and wear behaviors of spiral wound gasket (SWG) sealing surface
Zheng Zhang et al.
TRIBOLOGY INTERNATIONAL (2019)
Synergisms and antagonisms between MoS2 nanotubes and representative oil additives under various contact conditions
A. Tomala et al.
TRIBOLOGY INTERNATIONAL (2019)
Numerical and experimental investigations of particle embedment during the incubation period in the solid particle erosion of ductile materials
V. Hadavi et al.
TRIBOLOGY INTERNATIONAL (2019)
Evolution of tribologically induced chemical and structural degradation in hydrogenated a-C coatings
Roman Nevshupa et al.
TRIBOLOGY INTERNATIONAL (2019)
Preparation and tribological properties of core-shell Fe3O4@C microspheres
Jian Huang et al.
TRIBOLOGY INTERNATIONAL (2019)
Nanodiamond as an effective additive in oil to dramatically reduce friction and wear for fretting steel/copper interfaces
Wenzheng Zhai et al.
TRIBOLOGY INTERNATIONAL (2019)
Frequency-Modulation Atomic Force Microscopic Observation for Ultralow Frictional Solid-Liquid Interface of Diamond-Like Carbon in an Environmentally Friendly Oil
Hikaru Okubo et al.
TRIBOLOGY LETTERS (2019)
Boundary Element Analyses on the Adhesive Contact between an Elastic Cylinder and a Rigid Half-Space
Jiunn-Jong Wu
TRIBOLOGY LETTERS (2019)
A Facile Surface Treatment to Improve the Abrasion Resistance of Photosensitive Film for Screen Printing
Junlan Li et al.
TRIBOLOGY TRANSACTIONS (2019)
Material removal analysis for compliant polishing tool using adaptive meshing technique and Archard wear model
Adhithya Plato Sidharth Arunachalam et al.
WEAR (2019)
Mechano-chemical decomposition of organic friction modifiers with multiple reactive centres induces superlubricity of ta-C
Takuya Kuwahara et al.
NATURE COMMUNICATIONS (2019)
Sliding wear characteristics of as-deposited and heat-treated electroless Ni-P coatings against AISI E52100 steel ball
K. Uday Venkat Kiran et al.
MATERIALS RESEARCH EXPRESS (2019)
Molecular behaviors in thin film lubrication-Part three: Superlubricity attained by polar and nonpolar molecules
Xiangyu Ge et al.
FRICTION (2019)
Tribological performance of tributylmethylammonium bis(trifluoromethylsulfonyl)amide as neat lubricant and as an additive in a polar oil
R. Gonzalez et al.
FRICTION (2019)
Boundary element method (BEM) applied to the rough surface contact vs. BEM in computational mechanics
Yang Xu et al.
FRICTION (2019)
Lubricant as a sticking-scale inhibitor on high temperature sliding contact
Bach H. Tran et al.
TRIBOLOGY INTERNATIONAL (2019)
A review of acoustic emission as a biotribological diagnostic tool
K. A. Olorunlambe et al.
TRIBOLOGY-MATERIALS SURFACES & INTERFACES (2019)
Tribology of flexible and sliding spinal implants: Development of experimental and numerical models
Sophie Le Cann et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
Microstructure and properties of Fe5Cr5SiTiCoNbMoW coating by laser cladding
Y. X. Guo et al.
SURFACE ENGINEERING (2018)
Specialized wear facets and late ontogeny in mammalian dentitions
Wighart von Koenigswald
HISTORICAL BIOLOGY (2018)
Effects of evaluated temperature on tribological behaviors of micro-arc oxidated 2219 aluminum alloy and their field application
Junxiu Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Effects of nanocrystallized layer on the tribological properties of micro-arc oxidation coatings on 2618 aluminum alloy under high temperatures
Peng Yi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Silicon nitride bioceramics in healthcare
Mohamed Rahaman et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2018)
A Development of a SPH Model for Simulating Surface Erosion by Impact(s) of Irregularly Shaped Particles
Xiangwei Dong et al.
INTERNATIONAL JOURNAL OF COMPUTATIONAL METHODS (2018)
Effect of homogenisation of cheese milk and high-shear mixing of the curd during cream cheese manufacture
Dian Widya Ningtyas et al.
INTERNATIONAL JOURNAL OF DAIRY TECHNOLOGY (2018)
Tribological behaviour of self-lubricating materials at high temperatures
Hector Torres et al.
INTERNATIONAL MATERIALS REVIEWS (2018)
Voltage and wear debris from Ti-6Al-4V interact to affect cell viability during in-vitro fretting corrosion
Tiantian Hui et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)
Surface cross-linked ultra high molecular weight polyethylene by emulsified diffusion of dicumyl peroxide
Sanem Kayandan et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
Characterization of wear debris from metal-on-metal hip implants during normal wear versus edge-loading conditions
Michael Kovochich et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
An in vitro simulation model to assess the severity of edge loading and wear, due to variations in component positioning in hip joint replacements
O. O'Dwyer Lancaster-Jones et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
Mechanical, chemical and biological damage modes within head-neck tapers of CoCrMo and Ti6Al4V contemporary hip replacements
Deborah J. Hall et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
Reducing fretting-initiated crevice corrosion in hip simulator tests using a zirconia-toughened alumina femoral head
Masayuki Kyomoto et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
Wear resistance of poly(2-methacryloyloxyethyl phosphorylcholine)-grafted carbon fiber reinforced poly(ether ether ketone) liners against metal and ceramic femoral heads
Shihori Yamane et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
Can degradation products released from dental implants affect peri-implant tissues?
M. Noronha Oliveira et al.
JOURNAL OF PERIODONTAL RESEARCH (2018)
Influence of different functional ingredients on physical properties, rheology, tribology, and oral perceptions of no fat stirred yoghurt
Sophia Bao Xian Ng et al.
JOURNAL OF TEXTURE STUDIES (2018)
Tribological Behavior of Tool Steel Under Press Hardening Conditions Using Simulative Tests
Sergej Mozgovoy et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2018)
An Analytical Model of Mechanistic Wear of Polymers
Sandip Panda et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2018)
Improvement in Microscratch Resistance of Graphite by Surface Modification for Molding Applications
Auezhan Amanov et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2018)
Duplex Surface Treatment of AISI 1045 Steel Via Pack Boriding and Plasma Nitriding: Characterization and Tribological Studies
Ali Habibolahzadeh et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2018)
High wear resistance of femoral components coated with titanium nitride: a retrieval analysis
Christian Fabry et al.
KNEE SURGERY SPORTS TRAUMATOLOGY ARTHROSCOPY (2018)
Anomalous Potential-Dependent Friction on Au(111) Measured by AFM
Leila Pashazanusi et al.
LANGMUIR (2018)
Ionic liquids-based magnetic nanofluids as lubricants
Xin Shi et al.
LUBRICATION SCIENCE (2018)
A mathematical model for the third-body concept
Pavel Krejci et al.
MATHEMATICS AND MECHANICS OF SOLIDS (2018)
Effect of adding nanosilica particulate filler on the wear behavior of dental composite
Sonal et al.
POLYMER COMPOSITES (2018)
Evaluation of environmental friendly Ag-PTFE composite coating for use in threaded compression fittings
Raymond Sieh et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2018)
Calculating method for the wear of metal-to-metal dry sliding based on elastic-plastic contact theory
Junjie Lu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2018)
Experimental study on the vibration characteristic responses on the surface damage of wheel materials
Ying Tian et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2018)
Effect of surface chemical etching on the lubricated reciprocating wear of honed Al-Si alloy
Cheng-Di Li et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2018)
Synergistic effects of surface strengthening and surface micro-texture on aviation spherical plain bearing tribological properties
Zewei Yuan et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2018)
Tribological properties of trimellitates containing polymethacrylates viscosity modifiers
Yan Zhao et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2018)
Study on tribological performances of MoS2 coating at high temperature
Fanming Meng et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2018)
Size distribution analysis of wear particles in the transmission system of mining equipment
Ashwani Kumar et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2018)
Measuring contact area in a sliding human finger-pad contact
X. Liu et al.
SKIN RESEARCH AND TECHNOLOGY (2018)
Human wetness perception of fabrics under dynamic skin contact
Margherita Raccuglia et al.
TEXTILE RESEARCH JOURNAL (2018)
Friction Measurements with Molten Chocolate
M. Masen et al.
TRIBOLOGY LETTERS (2018)
The Competing Effects of Counterface Peaks and Valleys on the Wear and Transfer of Ultra-Low Wear Alumina-PTFE
Jiaxin Ye et al.
TRIBOLOGY LETTERS (2018)
Tribology of a Braille Display and EEG Correlates
Novaf Ozgun et al.
TRIBOLOGY LETTERS (2018)
High-Temperature Friction and Wear of Boron Steel and Tool Steel in Open and Closed Tribosystems
Sinuhe Hernandez et al.
TRIBOLOGY TRANSACTIONS (2018)
Effect of Operating Temperature on Tribological Behavior of As-Plated Ni-B Coating Deposited by Electroless Method
Arkadeb Mukhopadhyay et al.
TRIBOLOGY TRANSACTIONS (2018)
Single Cell Oil from Oleaginous Yeast Grown on Sugarcane Bagasse-Derived Xylose: An Approach toward Novel Biolubricant for Low Friction and Wear
Sheetal Bandhu et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)
Normal and Frictional Force Hysteresis between Self-Assembled Fluorosurfactant Micelle Arrays at the Nanoscale
Jinjin Li et al.
ADVANCED MATERIALS INTERFACES (2018)
Film forming behavior in thin film lubrication at high speeds
He Liang et al.
FRICTION (2018)
Isosteric design of friction-reduction and anti-wear lubricant additives with less sulfur content
Xinlei Gao et al.
FRICTION (2018)
Anti-loosening performance of coatings on fasteners subjected to dynamic shear load
Junbo Zhou et al.
FRICTION (2018)
Effect of arc-current and spray distance on elastic modulus and fracture toughness of plasma-sprayed chromium oxide coatings
Simanchal Kar et al.
FRICTION (2018)
Contribution of friction and adhesion to the reliable attachment of a gecko to smooth inclines
Zhouyi Wang et al.
FRICTION (2018)
Friction characteristics of mechanically exfoliated and CVD-grown single-layer MoS2
Dinh Le Cao Ky et al.
FRICTION (2018)
Tribological evaluation of environmentally friendly ionic liquids derived from renewable biomaterials
Cheng Jiang et al.
FRICTION (2018)
Estimating antiwear properties of esters as potential lubricant-based oils using QSTR models with CoMFA and CoMSIA
Zhan Wang et al.
FRICTION (2018)
Analysis of the coated and textured ring/liner conjunction based on a thermal mixed lubrication model
Chunxing Gu et al.
FRICTION (2018)
Combined effect of the use of carbon fiber and seawater and the molecular structure on the tribological behavior of polymer materials
Zhiqiang Wang et al.
FRICTION (2018)
Improved Lubricating Performance by Combining Oil-Soluble Hairy Silica Nanoparticles and an Ionic Liquid as an Additive for a Synthetic Base Oil
Bryan T. Seymour et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Self-Healing in Carbon Nitride Evidenced As Material Inflation and Superlubric Behavior
Konstantinos D. Bakoglidis et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Effect of Humidity and Water Intercalation on the Tribological Behavior of Graphene and Graphene Oxide
Taib Arif et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Anti-Inflammation and Joint Lubrication Dual Effects of a Novel Hyaluronic Acid/Curcumin Nanomicelle Improve the Efficacy of Rheumatoid Arthritis Therapy
Zengjie Fan et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
A low friction, biphasic and boundary lubricating hydrogel for cartilage replacement
Piers E. Milner et al.
ACTA BIOMATERIALIA (2018)
Remote Control over Underwater Dynamic Attachment/Detachment and Locomotion
Yanfei Ma et al.
ADVANCED MATERIALS (2018)
Earthworm-Inspired Rough Polymer Coatings with Self-Replenishing Lubrication for Adaptive Friction-Reduction and Antifouling Surfaces
Huaixia Zhao et al.
ADVANCED MATERIALS (2018)
Brief communication: Dental microwear and diet of Homo naledi
Peter S. Ungar et al.
AMERICAN JOURNAL OF PHYSICAL ANTHROPOLOGY (2018)
Quantitative comparison of incisal tooth wear in patients receiving one-phase or two-phase treatment for skeletal Class III malocclusion with anterior crossbite
So-Jeong Jang et al.
ANGLE ORTHODONTIST (2018)
Characterizing constraining forces in the alignment phase of orthodontic treatment
Christopher G. Gibson et al.
ANGLE ORTHODONTIST (2018)
In vitro bioactivity, tribological property, and antibacterial ability of Ca-Si-based coatings doped with cu particles in-situ fabricated by laser cladding
Baoping Hou et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2018)
Contact mechanics of graphene-covered metal surfaces
Andreas Klemenz et al.
APPLIED PHYSICS LETTERS (2018)
High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating
Guo Jin et al.
APPLIED SURFACE SCIENCE (2018)
Low friction and wear behaviour of non-hydrogenated DLC (a-C) sliding against fluorinated tetrahedral amorphous carbon (ta-C-F) at elevated temperatures
S. Bhowmick et al.
APPLIED SURFACE SCIENCE (2018)
Exploring the low friction of diamond-like carbon films in carbon dioxide atmosphere by experiments and first-principles calculations
Lei Huo et al.
APPLIED SURFACE SCIENCE (2018)
Probing superlubricity stability of hydrogenated diamond-like carbon film by varying sliding velocity
Yunhai Liu et al.
APPLIED SURFACE SCIENCE (2018)
Influence of structure evolution on tribological properties of fluorine-containing diamond-like carbon films: From fullerene-like to amorphous structures
Jia Wang et al.
APPLIED SURFACE SCIENCE (2018)
A promising orthopedic implant material with enhanced osteogenic and antibacterial activity: Al2O3-coated aluminum alloy
Yuchang Weng et al.
APPLIED SURFACE SCIENCE (2018)
Effect of palm oil alone or associated to stannous solution on enamel erosive-abrasive wear: A randomized in situ/ex vivo study
Franciny Querobim Ionta et al.
ARCHIVES OF ORAL BIOLOGY (2018)
Investigating the efficiency of a bio-inspired insect repellent surface structure
Christopher Graf et al.
BIOINSPIRATION & BIOMIMETICS (2018)
A nonlinear homogenized finite element analysis of the primary stability of the bone-implant interface
Marzieh Ovesy et al.
BIOMECHANICS AND MODELING IN MECHANOBIOLOGY (2018)
Tribochemical reactions and graphitization of diamond-like carbon against alumina give volcano-type temperature dependence of friction coefficients: A tight-binding quantum chemical molecular dynamics simulation
Yang Wang et al.
CARBON (2018)
Structure effects of sp2-rich carbon films under super-low friction contact
Yongfu Wang et al.
CARBON (2018)
Si doping enhances the thermal stability of diamond-like carbon through reductions in carbon-carbon bond length disorder
J. Hilbert et al.
CARBON (2018)
Impacts of environments on nanoscale wear behavior of graphene: Edge passivation vs. substrate pinning
Yizhou Qi et al.
CARBON (2018)
Synthesis of hollow fullerene-like molybdenum disulfide/reduced graphene oxide nanocomposites with excellent lubricating properties
Jian Wu et al.
CARBON (2018)
In-situ tribochemical formation of self-lubricating diamond-like carbon films
N. Argibay et al.
CARBON (2018)
Hollow spherical and nanosheet-base BN nanoparticles as perspective additives to oil lubricants: Correlation between large-scale friction behavior and in situ TEM compression testing
A. V. Bondarev et al.
CERAMICS INTERNATIONAL (2018)
Tribological behaviour of a 3Y-TZP/Ta ceramic-metal biocomposite against ultrahigh molecular weight polyethylene (UHMWPE)
A. Smirnov et al.
CERAMICS INTERNATIONAL (2018)
Effect of cobalt content on high-temperature tribological properties of TiC-Co coatings
Yaxiong Du et al.
CERAMICS INTERNATIONAL (2018)
Formation and properties of bioactive barium titanate coatings produced by plasma electrolytic oxidation
Yifan Mao et al.
CERAMICS INTERNATIONAL (2018)
Dispersibility and rheological behavior of functionalized silica nanoparticles as lubricant additives
Tianyi Sui et al.
CERAMICS INTERNATIONAL (2018)
Experimental Study on Wear Performance and Oil Film Characteristics of Surface Textured Cylinder Liner in Marine Diesel Engine
Zhi-Wei Guo et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2018)
Study on the tribological behavior of surgical suture interacting with a skin substitute by using a penetration friction apparatus
Gangqiang Zhang et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2018)
Study on the development of wax emulsion with liquid crystal structure and its moisturizing and frictional interactions with skin
Ye Wang et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2018)
Hot corrosion of borate melt and interface chemistry of borate-coated steel under tribological stimulation
Bach H. Tran et al.
CORROSION SCIENCE (2018)
Wear measurement of dental tissues and materials in clinical studies: A systematic review
C. Wulfman et al.
DENTAL MATERIALS (2018)
Wear of polyetherketoneketones - Influence of titanium dioxide content and antagonistic material
Thomas Kewekordes et al.
DENTAL MATERIALS (2018)
Corrosion resistance and mechanical properties of titanium nitride plating on orthodontic wires
Haruki Sugisawa et al.
DENTAL MATERIALS JOURNAL (2018)
Onion-like carbon films endow macro-scale superlubricity
Zhenbin Gong et al.
DIAMOND AND RELATED MATERIALS (2018)
A review on the wear of oil drill bits (conventional and the state of the art approaches for wear reduction and quantification)
Rafid K. Abbas
ENGINEERING FAILURE ANALYSIS (2018)
Comparison of the Lubricity and Surface Roughness of 5 Cosmetic Contact Lenses
Charis Lau et al.
EYE & CONTACT LENS-SCIENCE AND CLINICAL PRACTICE (2018)
On the road to understanding and control of creaminess perception in food colloids
Eric Dickinson
FOOD HYDROCOLLOIDS (2018)
A novel strategy of periodic dosing of soy-lecithin as additive during long term test of diesel engine fueled with straight vegetable oil
Pinkesh R. Shah et al.
FUEL (2018)
Synthesis of ionic liquid functionalized graphene oxides and their tribological property under water lubrication
Weiwei Tang et al.
FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2018)
Preparation and tribological properties of BN/calcium borate nanocomposites as additive in lubricating oil
Yanfei Yang et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2018)
A mixed elastohydrodynamic lubrication model based on virtual rough surface for studying the tribological effect of asperities
Hui Zhang et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2018)
Effect of wear parameters on dry abrasive wear of RZ5-TiC in situ composite
Deepak Mehra et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2018)
Effects of adsorption layers and elastic deformation on thin-film lubrication of circular contacts with non-Newtonian lubricants
Li-Ming Chu et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2018)
Theoretical and experimental modeling of impact wear
Mehdi Akhondizadeh et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2018)
Alternative calculation on transient elasto-hydrodynamic lubrication
Shaocheng Zhu et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2018)
Surface roughness effects on point contact elastohydrodynamic lubrication in linear rolling guide with fractal surface topographies
Linlin Li et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2018)
Online condition monitoring of misaligned meshing gears using wear debris and oil quality sensors
Paras Kumar et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2018)
An online de-noising method for oil ultrasonic wear debris signal: fuzzy morphology component analysis
Yining Li et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2018)
Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method
Mu Li et al.
INTERMETALLICS (2018)
CFD research on particle movement and nozzle wear in the abrasive water jet cutting head
Zhengrong Qiang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Flow and friction behaviors of 6061 aluminum alloy at elevated temperatures and hot stamping of a B-pillar
Yong Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Advance on friction of stamping forming
Gui Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Mechanical properties and microstructure of potato peels
Li Junwei et al.
INTERNATIONAL JOURNAL OF FOOD PROPERTIES (2018)
A multiscale DEM-FEM approach to investigate the tire-pavement friction
Yue Hou et al.
INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2018)
The elevated-temperature wear behavior evolution of HVOF sprayed tungsten carbide coatings: Respond to heat treatment
Teng Wang et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
An efficient model for the frictional contact between two multiferroic bodies
Xin Zhang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)
Semi-analytical solution of three-dimensional steady state thermoelastic contact problem of multilayered material under friction heating
Haibo Zhang et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2018)
Understanding the lubrication mechanism between the polyhydroxyl group lubricants and metal surfaces
Qunfeng Zeng
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2018)
Saliva and Flavor Perception: Perspectives
Francis Canon et al.
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2018)
Structure and high-temperature property of amorphous composite coating synthesized by laser cladding FeCrCoNiSiB high-entropy alloy powder
F. Y. Shu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Significant improvement in cell adhesion and wear resistance of biomedical beta-type titanium alloy through ultrasonic nanocrystal surface modification
Mehdi Kheradmandfard et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Microscale frictional strains determine chondrocyte fate in loaded cartilage
Edward D. Bonnevie et al.
JOURNAL OF BIOMECHANICS (2018)
Evaluation of the head-helmet sliding properties in an impact test
Antonia Trotta et al.
JOURNAL OF BIOMECHANICS (2018)
Development of a preclinical natural porcine knee simulation model for the tribological assessment of osteochondral grafts in vitro
P. Bowland et al.
JOURNAL OF BIOMECHANICS (2018)
Material dependent fretting corrosion in spinal fusion devices: Evaluation of onset and long-term response
Vaneet Singh et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
The Prey Capture Mechanism of Micro Structure on the Sarracenia Judith Hindle Inner Surface
Yang Gan et al.
JOURNAL OF BIONIC ENGINEERING (2018)
Coupling Effect of Morphology and Mechanical Properties Contributes to the Tribological Behaviors of Snake Scales
Long Zheng et al.
JOURNAL OF BIONIC ENGINEERING (2018)
Operculum of a Water Snail is a Hydrodynamic Lubrication Sheet
Xiaoyan Xu et al.
JOURNAL OF BIONIC ENGINEERING (2018)
The dependency of adhesion and friction on electrostatic attraction
B. N. J. Persson
JOURNAL OF CHEMICAL PHYSICS (2018)
Structure and dynamics of mica-confined films of [C10C1Pyrr][NTf2] ionic liquid
Adilson Alves de Freitas et al.
JOURNAL OF CHEMICAL PHYSICS (2018)
Tooth wear and cleaning effect of an abrasive-free dentifrice
Jae-Hyun Ahn et al.
JOURNAL OF DENTAL SCIENCES (2018)
Mechanical and frictional properties of aesthetic orthodontic wires obtained by hard chrome carbide plating
Takashi Usui et al.
JOURNAL OF DENTAL SCIENCES (2018)
Randomized clinical study of wear of enamel antagonists against polished monolithic zirconia crowns
J. F. Esquivel-Upshaw et al.
JOURNAL OF DENTISTRY (2018)
Holding tight to feathers - structural specializations and attachment properties of the avian ectoparasite Crataerina pallida (Diptera, Hippoboscidae)
Dennis S. Petersen et al.
JOURNAL OF EXPERIMENTAL BIOLOGY (2018)
Dental topography and the diet of Homo naledi
Michael A. Berthaume et al.
JOURNAL OF HUMAN EVOLUTION (2018)
Large mammal diets and paleoecology across the Oldowan-Acheulean transition at Olduvai Gorge, Tanzania from Check for stable isotope and tooth wear analyses
Kevin T. Uno et al.
JOURNAL OF HUMAN EVOLUTION (2018)
Dietary traits of the ungulates from the HWK EE site at Olduvai Gorge (Tanzania): Diachronic changes and seasonality
Florent Rivals et al.
JOURNAL OF HUMAN EVOLUTION (2018)
Influence of Process-Induced Anisotropy and Synovial Environment on Wear of EBM Built Ti6Al4V Joint Implants
Muhammad Qasim Riaz et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Tribological Performance of M50-Ag-TiC Self-Lubricating Composites at Elevated Temperature
Hongyan Zhou et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Tribology and hot forming performance of self-lubricious NC/NiBN and NC/WC:C hybrid composite coatings for hot forming die
Yangchun Dong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Effects of oil-in-water based nanolubricant containing TiO2 nanoparticles in hot rolling of 304 stainless steel
Wenzhen Xia et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
An attempt to improve the poor performance characteristics of coconut oil for industrial lubricants
Suresh Babu Valeru et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2018)
Tuning of the hydrophilicity and hydrophobicity of nitrogen doped carbon dots: A facile approach towards high efficient lubricant nanoadditives
Wangji Shang et al.
JOURNAL OF MOLECULAR LIQUIDS (2018)
Tribomechanical Properties of a Carbon-Based Nanolayer Prepared by Nitrogen Ion Beam Assisted Deposition for Finger Joint Replacements
Tomas Horazdovsky et al.
JOURNAL OF NANOMATERIALS (2018)
Quantitative evaluation of retrieved reverse total shoulder arthroplasty liner surface deviation and volumetric wear
Michael D. Kurdziel et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2018)
Comparing damage on retrieved total elbow replacement bushings with lab worn specimens subjected to varied loading conditions
Ryan Willing
JOURNAL OF ORTHOPAEDIC RESEARCH (2018)
Effect of bearing friction torques on the primary stability of press-fit acetabular cups: A novel in vitro method
Alexander Jahnke et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2018)
Orders of Magnitude Changes in the Friction of an Ionic Liquid on Carbonaceous Surfaces
Nicolas Voeltzel et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2018)
Effects of Water on Mica-Ionic Liquid Interfaces
Fei Zhang et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2018)
Contrasting Roles of Water at Sliding Interfaces between Silicon-Based Materials: First-Principles Molecular Dynamics Sliding Simulations
Yusuke Ootani et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2018)
Superlubricity Enabled by Pressure-Induced Friction Collapse
Junhui Sun et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)
Molecular Insight into the Slipperiness of Ice
Bart Weber et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)
Macro- and microtopographical examination and quantification of CAD-CAM composite resin 2-and 3-body wear
Carolin Stoeckl et al.
JOURNAL OF PROSTHETIC DENTISTRY (2018)
High-temperature low-friction behaviors of gamma-Fe2O3@SiO2 nanocomposite coatings obtained through sol-gel method
Qunfeng Zeng et al.
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2018)
Bioinspired Supramolecular Lubricating Hydrogel Induced by Shear Force
Xuewei Zhang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)
Influence of abrasive solutions on direct restorative composites wear
Pedro V. Antunes et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2018)
Towards wear testing of high demanding daily activities on total hip replacement: preliminary results
Saverio Affatato
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2018)
Electrophoretic Deposition, Microstructure and Selected Properties of Composite Alumina/Polyetheretherketone Coatings on the Ti-13Nb-13Zr Alloy
Tomasz Moskalewicz et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Tribological behavior of plasma sprayed carbon nanotubes reinforced TiO2 coatings
Hai-dou Wang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
A comprehensive combined experimental and computational framework for pre-clinical wear simulation of total knee replacements
A. Abdelgaied et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Study on biocompatibility, tribological property and wear debris characterization of ultra-low-wear polyethylene as artificial joint materials
Yan-Yan Bian et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Improving surface wettability and lubrication of polyetheretherketone (PEEK) by combining with polyvinyl alcohol (PVA) hydrogel
Xiaoduo Zhao et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Role of particulate concentration in tooth wear
Oscar Borrero-Lopez et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Insights into adhesion of abalone: A mechanical approach
Jing Li et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Effects of crystal refining on wear behaviors and mechanical properties of lithium disilicate glass-ceramics
Zhenzhen Zhang et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Tribological properties of PVA/PVP blend hydrogels against articular cartilage
Yusuf Kanca et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Enhanced lubricant film formation through micro-dimpled hard-on-hard artificial hip joint: An in-situ observation of dimple shape effects
Dipankar Choudhury et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Loading and kinematic profiles for patellofemoral durability testing
Alessandro Navacchia et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Tribological evaluation of biomedical polycarbonate urethanes against articular cartilage
Yusuf Kanca et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
A phospholipid polymer graft layer affords high resistance for wear and oxidation under load bearing conditions
Masayuki Kyomoto et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Insights on the thermal impacts of wing colorization of migrating birds on their skin friction drag and the choice of their flight route
M. Hassanalian et al.
JOURNAL OF THERMAL BIOLOGY (2018)
A New Method for Eyring Shear-Thinning Models in Elliptical Contacts Thermal Elastohydrodynamic Lubrication
Xiaoling Liu et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2018)
Numerical Analysis of Transient Elastohydrodynamic Lubrication During Startup and Shutdown Processes
Xiqun Lu et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2018)
The Effects of Microdimple Texture on the Friction and Thermal Behavior of a Point Contact
S. Li et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2018)
Partial Slip Texture Slider and Journal Bearing Lubricated With Newtonian Fluids: A Review
A. Senatore et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2018)
Numerical Prediction of Surface Wear and Roughness Parameters During Running-In for Line Contacts Under Mixed Lubrication
Yazhao Zhang et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2018)
Drastic Swelling of Lipid Oligobilayers by Polyelectrolytes: A Potential Molecular Model for the Internal Structure of Lubricating Films in Mammalian Joints
Felicitas Schwoerer et al.
LANGMUIR (2018)
Mechanism of Antiwear Property Under High Pressure of Synthetic Oil-Soluble Ultrathin MoS2 Sheets as Lubricant Additives
Zhe Chen et al.
LANGMUIR (2018)
Liquid Superlubricity of Polyethylene Glycol Aqueous Solution Achieved with Boric Acid Additive
Xiangyu Ge et al.
LANGMUIR (2018)
Superlubricity of 1-Ethyl-3-methylimidazolium trifluoromethanesulfonate Ionic Liquid Induced by Tribochemical Reactions
Xiangyu Ge et al.
LANGMUIR (2018)
Friction of Poroelastic Contacts with Thin Hydrogel Films
Jessica Delavoipiere et al.
LANGMUIR (2018)
Film building in circular EHL contact lubricated by oil droplet groups
Feng Guo et al.
LUBRICATION SCIENCE (2018)
Effect of dispersant on nano-PTFE: Striking the balance between stability and tribo-performance
Mukesh Kumar Dubey et al.
LUBRICATION SCIENCE (2018)
Wear particle classification using genetic programming evolved features
Bin Xu et al.
LUBRICATION SCIENCE (2018)
The purification and tribological property of the synthetic magnesium silicate hydroxide modified by oleic acid
Kai Gao et al.
LUBRICATION SCIENCE (2018)
Role of size of hexagonal boron nitride particles on tribo-performance of nano and micro oils
Manoj Kumar Gupta et al.
LUBRICATION SCIENCE (2018)
Enhanced tribo-chemical properties of oxygen functionalized mechanically exfoliated hexagonal boron nitride nanolubricant additives
Jayakrushna Sahu et al.
MATERIALS CHEMISTRY AND PHYSICS (2018)
TiCuN solid solution coating: Excellent wear-resistant biocompatible material to protect artificial joint
Y. J. Zhang et al.
MATERIALS LETTERS (2018)
Microstructure and high-temperature wear mechanism of laser cladded CoCrBFeNiSi high-entropy alloy amorphous coating
F. Y. Shu et al.
MATERIALS LETTERS (2018)
Tribocorrosion behavior of Ti-30Zr alloy for dental implants
Zhenguo Wang et al.
MATERIALS LETTERS (2018)
Synthesis and tribological behavior of fatty acid constituted tetramethylguanidinium (TMG) ionic liquids for a steel/steel contact
Praveen K. Khatri et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
A promising new high temperature self-lubricating material: CoCrFeNiS0.5 high entropy alloy
Aijun Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
A generalised porous medium approach to study thermo-fluid dynamics in human eyes
Alessandro Mauro et al.
MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING (2018)
In vitro simulation of fretting-corrosion in hip implant modular junctions: The influence of pH
Dmitry Royhman et al.
MEDICAL ENGINEERING & PHYSICS (2018)
Superlubricity of epitaxial monolayer WS2 on graphene
Holger Buch et al.
NANO RESEARCH (2018)
Real-time observation of slipping and rolling events in DLC wear nanoparticles
Takaaki Sato et al.
NANOTECHNOLOGY (2018)
Friction fluctuations of gold nanoparticles in the superlubric regime
Dirk Dietzel et al.
NANOTECHNOLOGY (2018)
Feeding ecology of Tragelaphini (Bovidae) from the Shungura Formation, Omo Valley, Ethiopia: Contribution of dental wear analyses
Cecile Blondel et al.
PALAEOGEOGRAPHY PALAEOCLIMATOLOGY PALAEOECOLOGY (2018)
Mastication and enamel microstructure in Cambaytherium, a perissodactyl-like ungulate from the early Eocene of India
Wighart von Koenigswald et al.
PALZ (2018)
Aging effect of pH on the mechanical and tribological properties of dental composite resins
Tingting Wu et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2018)
Ultra-low friction mechanism of highly sp3-hybridized amorphous carbon controlled by interfacial molecule adsorption
Jing Shi et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2018)
Asperity-Level Origins of Transition from Mild to Severe Wear
Ramin Aghababaei et al.
PHYSICAL REVIEW LETTERS (2018)
Association between periprosthetic tissue metal content, whole blood and synovial fluid metal ion levels and histopathological findings in patients with failed metal-on-metal hip replacement
Lari Lehtovirta et al.
PLOS ONE (2018)
A two-step method for rate-dependent nano-indentation of hydrogels
Rok Simic et al.
POLYMER (2018)
Wear behavior of light-cured dental composite reinforced with silane-treated nanosilica filler
Shiv Ranjan Kumar et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2018)
Study on the normal contact stiffness of the fractal rough surface in mixed lubrication
Yunyun Sun et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2018)
Formulation of a novel biolubricant with enhanced properties using esterified rubber seed oil as a base stock
Amith Aravind et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2018)
Squeezing and stick-slip friction behaviors of lubricants in boundary lubrication
Rong-Guang Xu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)
A novel numerical scheme for the analysis of effects of surface roughness on EHL line contact with couple stress fluid as lubricant
Bharati M. Shettar et al.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2018)
The contact sport of rough surfaces
Robert W. Carpick
SCIENCE (2018)
Humanoid Identification of Fabric Material Properties by Vibration Spectrum Analysis
Shuyang Ding et al.
SENSORS (2018)
Tactile Estimation of Molded Plastic Plates Based on the Estimated Impulse Responses of Mechanoreceptive Units
Lisako Nobuyama et al.
SENSORS (2018)
Approximating gecko setae via direct laser lithography
Omar Tricinci et al.
SMART MATERIALS AND STRUCTURES (2018)
Bioinspired microstructures of chitosan hydrogel provide enhanced wear protection
Jimmy Faivre et al.
SOFT MATTER (2018)
Evaluation of adhesion strength between amorphous splat and substrate by micro scratch method
Shu-ying Chen et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Improving high-temperature tribological characteristics on nanocomposite CrAlSiN coating by Mo doping
Heng Tao et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Microstructural design of self-lubricating laser claddings for use in high temperature sliding applications
H. Torres et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Improving the high temperature abrasion resistance of thermally sprayed Cr3C2-NiCr coatings by WC addition
Leo Janka et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Properties of HVOF-sprayed Stellite-6 coatings
Paolo Sassatelli et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Correlation between tactile perception and tribological and dynamical properties for human finger under different sliding speeds
Xue Zhou et al.
TRIBOLOGY INTERNATIONAL (2018)
Tribological behaviour of TiO2 Atmospheric Plasma Spray (APS) coating under mixed and boundary lubrication conditions in presence of oil containing MoDTC
P. Deshpande et al.
TRIBOLOGY INTERNATIONAL (2018)
A fast algorithm for boundary slippage including mass flow conserving cavitation model
Guy Bayada
TRIBOLOGY INTERNATIONAL (2018)
A modelling framework for the simulation of lubricated and dry line contacts
Jakob Moder et al.
TRIBOLOGY INTERNATIONAL (2018)
Prediction of wear trend of engines via on-line wear debris monitoring
Wei Cao et al.
TRIBOLOGY INTERNATIONAL (2018)
Nanoscale wear mechanisms of few-layer graphene sheets induced by interfacial adhesion
Lingfei Wang et al.
TRIBOLOGY INTERNATIONAL (2018)
Detection of gear pitting failure progression with on-line particle monitoring
J. Kattelus et al.
TRIBOLOGY INTERNATIONAL (2018)
Surface treatments for boriding of Ti6Al4V alloy in view of applications as a biomaterial
V Peretti et al.
TRIBOLOGY INTERNATIONAL (2018)
Numerical analysis of transverse reciprocating velocity effects in EHL point contacts
A. Felix Quinonez
TRIBOLOGY INTERNATIONAL (2018)
Solution of temperature distribution under frictional heating with consideration of material inhomogeneity
Yuanqing Liu et al.
TRIBOLOGY INTERNATIONAL (2018)
CFD modeling compared to temperature and friction measurements of an EHL line contact
Markus Hartinger et al.
TRIBOLOGY INTERNATIONAL (2018)
Superlubricity of 1,3-diketone based on autonomous viscosity control at various velocities
Ke Li et al.
TRIBOLOGY INTERNATIONAL (2018)
From finger friction and induced vibrations to brain activation: Tactile comparison between real and virtual textile fabrics
Brigitte Camillieri et al.
TRIBOLOGY INTERNATIONAL (2018)
Tribological behaviour of MoS2-based self-lubricating laser cladding for use in high temperature applications
H. Torres et al.
TRIBOLOGY INTERNATIONAL (2018)
Lowering friction of ball screws made of different steel grades through ultrasonic impact treatment
A. Amanov et al.
TRIBOLOGY INTERNATIONAL (2018)
Local transformation of amorphous hydrogenated carbon coating induced by high contact pressure
N. K. Fukumasu et al.
TRIBOLOGY INTERNATIONAL (2018)
Equilibrium surface texture of valve stems and burnishing method to obtain it
Mieczyslaw Korzynski et al.
TRIBOLOGY INTERNATIONAL (2018)
Durable and regenerable superhydrophobic coatings for brass surfaces with excellent self-cleaning and anti-fogging properties prepared by immersion technique
Priya Varshney et al.
TRIBOLOGY INTERNATIONAL (2018)
In situ observation of lubricant film formation in THR considering real conformity: The effect of model synovial fluid composition
D. Necas et al.
TRIBOLOGY INTERNATIONAL (2018)
3D printed PCU/UHMWPE polymeric blend for artificial knee meniscus
Raissa Araujo Borges et al.
TRIBOLOGY INTERNATIONAL (2018)
Antiwear performance of ionic liquid plus graphene dispersions with anomalous viscosity-temperature behavior
R. Pamies et al.
TRIBOLOGY INTERNATIONAL (2018)
Experimental investigation of the tribological behavior of lubricants with additive containing copper nanoparticles
Fatima Leonor Guzman Borda et al.
TRIBOLOGY INTERNATIONAL (2018)
High temperature and high pressure tribological experiments of advanced polymeric coatings in the presence of drilling mud for oil & gas applications
Pixiang Lan et al.
TRIBOLOGY INTERNATIONAL (2018)
Influence of surface profile of Co-28Cr-6Mo alloy on wear behaviour of ultra-high molecular weight polyethylene used in artificial joint
Yoshitaka Nakanishi et al.
TRIBOLOGY INTERNATIONAL (2018)
The effect of temperature and sliding speed on friction and wear of Si3N4, Al2O3, and ZrO2 balls tested against AlCrN PVD coating
M. Antonov et al.
TRIBOLOGY INTERNATIONAL (2018)
Preparation and lubricating properties of poly(vinylidene-fluoride) particles wrapped by reduced graphene oxide
Xing Li et al.
TRIBOLOGY INTERNATIONAL (2018)
Correlation between friction-induced vibrations and tactile perception during exploration tasks of isotropic and periodic textures
Ilaria Cesini et al.
TRIBOLOGY INTERNATIONAL (2018)
Influence of preload control on friction force measurement of fabric samples
Bilsay Sumer
TRIBOLOGY INTERNATIONAL (2018)
Comparison among the lubricated and unlubricated tribological behavior of coatings obtained by PEO on the Ti6Al4V alloy in alkaline solutions
J. M. Rios et al.
TRIBOLOGY INTERNATIONAL (2018)
Laser surface texturing of a WC-CoNi cemented carbide grade: Surface topography design for honing application
Shiqi Fang et al.
TRIBOLOGY INTERNATIONAL (2018)
Slipping domains in water-lubricated microsystems for improved load support
Daniele Savio et al.
TRIBOLOGY INTERNATIONAL (2018)
Tribocorrosion behavior of additive manufactured Ti-6Al-4V biomedical alloy
M. Buciumeanu et al.
TRIBOLOGY INTERNATIONAL (2018)
Durable and regenerable superhydrophobic coatings for aluminium surfaces with excellent self-cleaning and anti-fogging properties
P. Varshney et al.
TRIBOLOGY INTERNATIONAL (2018)
Study of the tribological properties and ageing of alkyphosphonic acid films on galvanized steel
Donald Hill et al.
TRIBOLOGY INTERNATIONAL (2018)
Ti6A14V cellular structures impregnated with biomedical PEEK - New material design for improved tribological behavior
M. Buciumeanu et al.
TRIBOLOGY INTERNATIONAL (2018)
Investigation of effect of various processing temperatures on abrasive wear behaviour of high power diode laser treated R260 grade rail steels
Ozan Yazici et al.
TRIBOLOGY INTERNATIONAL (2018)
Bi-Gaussian stratified effect of rough surfaces on acoustic emission under a dry sliding friction
Songtao Hu et al.
TRIBOLOGY INTERNATIONAL (2018)
Tribological properties of highly oriented Ti(C,N) deposited by chemical vapor deposition
L. von Fieandt et al.
TRIBOLOGY INTERNATIONAL (2018)
Insights into the behaviour of tool steel-aluminium alloy tribopair at different temperatures
E. Huttunen-Saarivirta et al.
TRIBOLOGY INTERNATIONAL (2018)
Lubricating mechanism of Fe3O4@MoS2 core-shell nanocomposites as oil additives for steel/steel contact
Yufu Xu et al.
TRIBOLOGY INTERNATIONAL (2018)
Investigating the tribological and biological performance of covalently grafted chitosan coatings on Co-Cr-Mo alloy
Liguo Qin et al.
TRIBOLOGY INTERNATIONAL (2018)
Friction-induced transfer of carbon quantum dots on the interface: Microscopic and spectroscopic studies on the role of inorganic-organic hybrid nanoparticles as multifunctional additive for enhanced lubrication
Mengting Ye et al.
TRIBOLOGY INTERNATIONAL (2018)
Theoretical model and experimental analysis of chemical mechanical polishing with the effect of slurry for abrasive removal depth and surface morphology of silicon wafer
Zone-Ching Lin et al.
TRIBOLOGY INTERNATIONAL (2018)
Microtextured CoCrMo alloy for use in metal-on-polyethylene prosthetic joint bearings: Multi-directional wear and corrosion measurements
J. Langhorn et al.
TRIBOLOGY INTERNATIONAL (2018)
A tribo-oxidation abrasive wear model to quantify the wear rate of a cobalt-based alloy subjected to fretting in low-to-medium temperature conditions
Alixe Dreano et al.
TRIBOLOGY INTERNATIONAL (2018)
Modelling acoustic emissions generated by tribological behaviour of mechanical seals for condition monitoring and fault detection
Hossein Towsyfyan et al.
TRIBOLOGY INTERNATIONAL (2018)
Investigation of different inorganic chemical compounds as hot metal forming lubricant by pin-on-disc and hot rolling
Shaogang Cui et al.
TRIBOLOGY INTERNATIONAL (2018)
Elastohydrodynamic lubrication for the finite line contact under transient loading conditions
Tobias Hultqvist et al.
TRIBOLOGY INTERNATIONAL (2018)
Effect of temperature on the friction and wear behavior of electroless Ni-P-MoS2-CaF2 self-lubricating composite coatings
Sanming Du et al.
TRIBOLOGY INTERNATIONAL (2018)
Significant improvement of tribological performances of polyamide 46/polyphenylene oxide alloy by functionalized zirconium phosphate
Jincheng Ran et al.
TRIBOLOGY INTERNATIONAL (2018)
Modeling and simulation in tribology across scales: An overview
A. I. Vakis et al.
TRIBOLOGY INTERNATIONAL (2018)
Measuring Evolution of Transfer Film-Substrate Interface Using Low Wear Alumina PTFE
Jiaxin Ye et al.
TRIBOLOGY LETTERS (2018)
Experimental Evaluation of Galling Under Press Hardening Conditions
Liang Deng et al.
TRIBOLOGY LETTERS (2018)
FFT-Based Methods for Solving a Rough Adhesive Contact: Description and Convergence Study
R. Bugnicourt et al.
TRIBOLOGY LETTERS (2018)
Film Thickness Formula for Thermal EHL Line Contact Considering a New Reynolds-Carreau Equation
Eduardo de la Guerra Ochoa et al.
TRIBOLOGY LETTERS (2018)
Investigation on Tribological Behavior of Ti2AlN/TiAl Composite at Room and Elevated Temperature
Daqun Wang et al.
TRIBOLOGY LETTERS (2018)
Molecular Layering in Nanometer-Confined Lubricants
Marc-Dominik Krass et al.
TRIBOLOGY LETTERS (2018)
Friction-Induced Inflammation
Angela A. Pitenis et al.
TRIBOLOGY LETTERS (2018)
The Mild-Severe Wear Transition in Erosion Wear
O. A. Zambrano et al.
TRIBOLOGY LETTERS (2018)
Extending the Double-Hertz Model to Allow Modeling of an Adhesive Elliptical Contact
N. H. M. Zini et al.
TRIBOLOGY LETTERS (2018)
On the Modeling of Adhesive Wear with Consideration of Loading Sequence
K. P. Lijesh et al.
TRIBOLOGY LETTERS (2018)
Thermal Elastohydrodynamic Lubrication of Ceramic Materials
Motohiro Kaneta et al.
TRIBOLOGY TRANSACTIONS (2018)
The Effects of Magnetic Treatment on the Tribological Behavior of AISI 1045 Steel under Lubricated Conditions
Xiang Xi et al.
TRIBOLOGY TRANSACTIONS (2018)
Mechanical and Tribological Properties of Ca/P-Doped Titanium Dioxide Layer Produced by Plasma Electrolytic Oxidation: Effects of Applied Voltage and Heat Treatment
Carlos A. H. Laurindo et al.
TRIBOLOGY TRANSACTIONS (2018)
Tribological Behavior of PTFE Composites Filled with PEEK and Nano-Al2O3
Qi Yuan et al.
TRIBOLOGY TRANSACTIONS (2018)
Toward low friction in high vacuum by designing textured a-C/IL duplex lubricating film
Hui Song et al.
VACUUM (2018)
Optimizing the tribological behavior of tantalum carbide coating for the bearing in total hip joint replacement
Suxuan Du et al.
VACUUM (2018)
Development of a constitutive model for erosion based on dissipated particle energy to predict the wear rate of ductile metals
Subhankar Biswas et al.
WEAR (2018)
Characterization and simulation methods applied to the study of fretting wear in Zircaloy-4
Gene A. Lucadamo et al.
WEAR (2018)
High-temperature sliding wear behaviour of Stellite (R) 12 and Tribaloy (R) T400
Alexander Renz et al.
WEAR (2018)
The wear mechanisms of reaction bonded silicon carbide under abrasive polishing and slurry jet impact conditions
T. Nguyen et al.
WEAR (2018)
Wear and damage transitions of two kinds of wheel materials in the rolling-sliding contact
W. T. Zhu et al.
WEAR (2018)
Sliding wear of borided sintered AISI M2 steel coated with AlTiN/CrN multilayer
E. A. dos S. de Almeida et al.
WEAR (2018)
Experimental study on friction and wear properties of interpenetrating polymer network alginate-polyacrylamide hydrogels for use in minimally-invasive joint implants
Mohammadreza Arjmandi et al.
WEAR (2018)
Effects of ethanol content on cast iron cylinder wear in a flex-fuel internal combustion engine-A case study
Dinecio dos Santos Filho et al.
WEAR (2018)
The effects of temperature on friction and wear mechanisms during direct press hardening of Al-Si coated ultra-high strength steel
J. Venema et al.
WEAR (2018)
In-situ friction and fretting wear measurements of Inconel 617 at elevated temperatures
Arman Ahmadi et al.
WEAR (2018)
Effects of using (Ti,Mo)C particles to reduce the three-body abrasive wear of a low alloy steel
Long Huang et al.
WEAR (2018)
Self-lubricating laser claddings for reducing friction and wear from room temperature to 600 degrees C
H. Torres et al.
WEAR (2018)
Wear behavior of medical grade PEEK and CFR PEEK under dry and bovine serum conditions
Marco Regis et al.
WEAR (2018)
Numerical model for prediction of tool wear and worn-out pin profile during friction stir welding
Pankaj Sahlot et al.
WEAR (2018)
Effect of normal load on two-body abrasive wear of an Fe-B-Cr-C based alloy with minor Cu and Ni additions
Yanliang Yi et al.
WEAR (2018)
Investigation of a self-lubricating coating for diesel engine pistons, as produced by combined microarc oxidation and electrophoresis
Chunsheng Ma et al.
WEAR (2018)
Antibiocorrosive epoxy-based coatings with low friction and high scratch resistance
Khatuna Barbakadze et al.
WEAR (2018)
Effect of desert sand on wear and rolling contact fatigue behaviour of various railway wheel steels
Michela Faccoli et al.
WEAR (2018)
Tool wear mechanism and its relation to material removal in ultrasonic machining
Jingsi Wang et al.
WEAR (2018)
Tribology of FeVCrC coatings deposited by HVOF and HVAF thermal spray processes
Giovanni Bolelli et al.
WEAR (2018)
Tribological performance of aromatic thermosetting polyester (ATSP) coatings under cryogenic conditions
Pixiang Lan et al.
WEAR (2018)
Influence of cutting speed and workpiece material on the wear mechanisms of CVD TiCN/alpha-Al2O3 coated cutting inserts during turning
Martina Gassner et al.
WEAR (2018)
A review of rolling contact fatigue behavior of silicon nitride focusing on testing practices and crack propagation analysis
Wataru Kanematsu
WEAR (2018)
Case study: Wear mechanisms of NiCrVMo-steel and CrB-steel scrap shear blades
Erfan Abbasi et al.
WEAR (2018)
A dynamical FEA fretting wear modeling taking into account the evolution of debris layer
P. Arnaud et al.
WEAR (2018)
Nanomanufacturing of silicon surface with a single atomic layer precision via mechanochemical reactions
Lei Chen et al.
NATURE COMMUNICATIONS (2018)
Operando tribochemical formation of onion-like-carbon leads to macroscale superlubricity
Diana Berman et al.
NATURE COMMUNICATIONS (2018)
Effect of microtrichia on the interlocking mechanism in the Asian ladybeetle, Harmonia axyridis (Coleoptera: Coccinellidae)
Jiyu Sun et al.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2018)
Carbon-Fibre-Reinforced SiC Composite (C/SiSiC) as an Alternative Material for Endoprosthesis: Fabrication, Mechanical and In-Vitro Biological Properties
Aline Reichert et al.
MATERIALS (2018)
Investigation of ultra-low friction on steel surfaces with diketone lubricants
Shumin Zhang et al.
RSC ADVANCES (2018)
Tribological properties of synthetic base oil containing polyhedral oligomeric silsesquioxane grafted graphene oxide
Bo Yu et al.
RSC ADVANCES (2018)
Mechanical synthesis of chemically bonded phosphorus-graphene hybrid as high-temperature lubricating oil additive
Xinhu Wu et al.
RSC ADVANCES (2018)
Novel rGO-T-C(n) Nanosheets developed via click chemistry as a lubricant anti-wear additive
Samira Bagheri et al.
SCIENTIFIC REPORTS (2018)
Roles of sliding-induced defects and dissociated water molecules on low friction of graphene
Zaixiu Yang et al.
SCIENTIFIC REPORTS (2018)
Mechanisms of tactile sensory deterioration amongst the elderly
Lisa Skedung et al.
SCIENTIFIC REPORTS (2018)
Contact geometry and mechanics predict friction forces during tactile surface exploration
Marco Janko et al.
SCIENTIFIC REPORTS (2018)
Notochordal cell matrix as a bioactive lubricant for the osteoarthritic joint
S. A. H. de Vries et al.
SCIENTIFIC REPORTS (2018)
An ex vivo salivary lubrication system to mimic xerostomic conditions and to predict the lubricating properties of xerostomia relieving agents
Jeroen Vinke et al.
SCIENTIFIC REPORTS (2018)
Wear and Friction Evaluation of Different Tool Steels for Hot Stamping
Maider Muro et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2018)
Mucins as multifunctional building blocks of biomaterials
Georgia Petrou et al.
BIOMATERIALS SCIENCE (2018)
Enamel Microcracks Induced by Simulated Occlusal Wear in Mature, Immature, and Deciduous Teeth
Manhal Ijbara et al.
BIOMED RESEARCH INTERNATIONAL (2018)
Triboelectric electronic-skin based on graphene quantum dots for application in self-powered, smart, artificial fingers
Zhongwei Xu et al.
NANO ENERGY (2018)
Influence of Steel Plate Roughness on the Frictional Properties of Cereal Kernels
Zdzislaw Kaliniewicz et al.
SUSTAINABILITY (2018)
Friction of Ionic Liquid-Glycol Ether Mixtures at Titanium Interfaces: Negative Load Dependence
Rong An et al.
ADVANCED MATERIALS INTERFACES (2018)
Task-Specific Oil-Miscible Ionic Liquids Lubricate Steel/Light Metal Alloy: A Tribochemistry Study
Qiangliang Yu et al.
ADVANCED MATERIALS INTERFACES (2018)
Effect of the vertical position of the canine on the frictional/orthodontic force ratio of Ni-Ti archwires during the levelling phase of orthodontic treatment
Moeko Kato et al.
JOURNAL OF ORAL SCIENCE (2018)
Human ability to discriminate surface chemistry by touch
Cody W. Carpenter et al.
MATERIALS HORIZONS (2018)
Tactile Sliding Behavior of R2R Mass-Produced PLLA Nanosheet towards Biomedical Device in Skin Applications
Sheng Zhang et al.
NANOMATERIALS (2018)
Mechanism of Benzene Tribopolymerization on the RuO2(110) Surface
J. Yang et al.
PHYSICAL REVIEW APPLIED (2018)
Superlubricity of Graphite Induced by Multiple Transferred Graphene Nanoflakes
Jinjin Li et al.
ADVANCED SCIENCE (2018)
Influence of epoxy, polytetrafluoroethylene (PTFE) and rhodium surface coatings on surface roughness, nano-mechanical properties and biofilm adhesion of nickel titanium (Ni-Ti) archwires
Moshabab A. Asiry et al.
MATERIALS RESEARCH EXPRESS (2018)
An experimental investigation on wear and corrosion characteristics of Mg-Co nanocomposites
G. R. Raghav et al.
MATERIALS RESEARCH EXPRESS (2018)
Effect of shot-peening treatment on the bio-tribological properties of a Ni+ implantation layer formed on the surface of Ti6Al4V
Wei Wang et al.
MATERIALS RESEARCH EXPRESS (2018)
Fretting wear of PEEK against XLPE
Handong Xu et al.
MATERIALS RESEARCH EXPRESS (2018)
Influence of dilution rate on the microstructure and properties of FeCrCoNi high-entropy alloy coating
Yangchuan Cai et al.
MATERIALS & DESIGN (2018)
Evidence that metallic proxies are unsuitable for assessing the mechanics of microwear formation and a new theory of the meaning of microwear
Adam van Casteren et al.
ROYAL SOCIETY OPEN SCIENCE (2018)
Finite element simulation and experimental test of the wear behavior for self-lubricating spherical plain bearings
Yahong Xue et al.
FRICTION (2018)
Advances in nonequilibrium molecular dynamics simulations of lubricants and additives
J. P. Ewen et al.
FRICTION (2018)
Galvanically induced potentials to enable minimal tribochemical wear of stainless steel lubricated with sodium chloride and ionic liquid aqueous solution
Tobias Amann et al.
FRICTION (2018)
Stress-augmented thermal activation: Tribology feels the force
Hugh Spikes
FRICTION (2018)
Explaining food texture through rheology
Helen S Joyner (Melito)
Current Opinion in Food Science (2018)
Mastication and enamel microstructure in Cambaytherium, a perissodactyl-like ungulate from the early Eocene of India
Wighart von Koenigswald et al.
PALZ (2018)
Emulsion Microgel Particles as High-Performance Bio-Lubricants
Ophelie Torres et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Palladium Nanoparticle-Enabled Ultrathick Tribofilm with Unique Composition
Chanaka Kumara et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Interlayer Friction and Superlubricity in Single-Crystalline Contact Enabled by Two-Dimensional Flake-Wrapped Atomic Force Microscope Tips
Yanmin Liu et al.
ACS NANO (2018)
Nanotribological Study of Supramolecular Template Networks Induced by Hydrogen Bonds and van der Waals Forces
Hongyu Shi et al.
ACS NANO (2018)
Wear performance of self-glazed zirconia crowns with different amount of occlusal adjustment after 6 months of clinical use
Andi Shi et al.
ADVANCES IN APPLIED CERAMICS (2018)
Characterization and tribological properties of rice husk carbon nanoparticles Co-doped with sulfur and nitrogen
Bangbang Wang et al.
APPLIED SURFACE SCIENCE (2018)
TiMoN nano-grains embedded into thin MoSx-based amorphous matrix: A novel structure for superhardness and ultra-low wear
Lina Yang et al.
APPLIED SURFACE SCIENCE (2018)
New animal model of extrinsic dental erosion-Erosive effect on the mouse molar teeth
Amela Tulek et al.
ARCHIVES OF ORAL BIOLOGY (2018)
Active agents, biomaterials, and technologies to improve biolubrication and strengthen soft tissues
Benjamin G. Cooper et al.
BIOMATERIALS (2018)
A synthetic polymeric biolubricant imparts chondroprotection in a rat meniscal tear model
Michel Wathier et al.
BIOMATERIALS (2018)
TiC/Ti3AlC2-Co plasma-sprayed coatings with excellent tribological properties
Hongfei Chen et al.
CERAMICS INTERNATIONAL (2018)
Study on the oxidation resistance and tribological behavior of glass lubricants used in hot extrusion of commercial purity titanium
Qing Fan et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2018)
Mechanical and tribological properties of a novel hydrogel composite reinforced by three-dimensional woven textiles as a functional synthetic cartilage
Mohammadreza Arjmandi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Ideal adhesive and shear strengths of solid interfaces: A high throughput ab initio approach
Paolo Restuccia et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Frictional coefficient during flossing of teeth
A. Y. Alali et al.
DENTAL MATERIALS (2018)
Microstructure changes of self-mated fullerene-like hydrogenated carbon films from low friction to super-low friction with the increasing normal load
Zhaofan Yue et al.
DIAMOND AND RELATED MATERIALS (2018)
Graphene quantum dots prepared by gaseous detonation toward excellent friction-reducing and antiwear additives
Chuang He et al.
DIAMOND AND RELATED MATERIALS (2018)
The Effect of Edge Compliance on the Contact between a Spherical Indenter and a High-Aspect-Ratio Rectangular Fin
G. Stan et al.
EXPERIMENTAL MECHANICS (2018)
Detection of foreign particles in lubrication oil with a microfluidic chip
Yu Wu
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2018)
Solidification mechanism and quantitative characterization of Fe-based amorphous splat formed by plasma sprayed droplets with different in-flight status
Shu-ying Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Metal ion release barrier function and biotribological evaluation of a zirconium nitride multilayer coated knee implant under highly demanding activities wear simulation
Ana Laura Puente Reyna et al.
JOURNAL OF BIOMECHANICS (2018)
Influence of Laser Nitriding on the Surface and Corrosion Properties of Ti-20Nb-13Zr Alloy in Artificial Saliva for Dental Applications
Mohamed A. Hussein et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Tactile Texture of Cosmetic Sponges and Their Friction Behavior under Accelerated Movement
Natsumi Asanuma et al.
JOURNAL OF OLEO SCIENCE (2018)
Establishment of an in vivo turkey model for the study of flexor tendon repair
Assaf Kadar et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2018)
Recent advances in understanding the fatigue and wear behavior of dental composites and ceramics
Jamie J. Kruzic et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Comparative study of the wear of the pair human teeth/Vita Enamic (R) vs commonly used dental ceramics through chewing simulation
F. Santos et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Selective laser melted titanium alloys for hip implant applications: Surface modification with new method of polymer grafting
Subir Ghosh et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)
Compatibility between Various Ionic Liquids and an Organic Friction Modifier as Lubricant Additives
Weimin Li et al.
LANGMUIR (2018)
Macroscale Superlubricity Enabled by Hydrated Alkali Metal Ions
Tianyi Han et al.
LANGMUIR (2018)
Black Phosphorus: Degradation Favors Lubrication
Shuai Wu et al.
NANO LETTERS (2018)
Origin of the moire superlattice scale lateral force modulation of graphene on a transition metal substrate
Lei Gao et al.
NANOSCALE (2018)
Origin of hydration lubrication of zwitterions on graphene
Jinjin Li et al.
NANOSCALE (2018)
Skin electronics from scalable fabrication of an intrinsically stretchable transistor array
Sihong Wang et al.
NATURE (2018)
Robust microscale superlubricity in graphite/hexagonal boron nitride layered heterojunctions
Yiming Song et al.
NATURE MATERIALS (2018)
Design of a tribometer for investigating tactile perception
Francesco Massi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2018)
Role of fingerprint-inspired relief structures in elastomeric slabs for detecting frictional differences arising from surface monolayers
Charles Dhong et al.
SOFT MATTER (2018)
Tribological properties of liquid-metal galinstan as novel additive in lithium grease
Pengpeng Bai et al.
TRIBOLOGY INTERNATIONAL (2018)
Effect of adhesion and tribological properties of modified composite nano-structured multi-layer nitride coatings on WC-Co tools life
Alexey Vereschaka et al.
TRIBOLOGY INTERNATIONAL (2018)
Numerical Model of the Slithering Snake Locomotion Based on the Friction Anisotropy of the Ventral Skin
A. E. Filippov et al.
TRIBOLOGY LETTERS (2018)
Nickel/Multi-walled Carbon Nanotube Nanocomposite Synthesized in Supercritical Fluid as Efficient Lubricant Additive for Mineral Oil
Yuan Meng et al.
TRIBOLOGY LETTERS (2018)
Multi-phase carbonaceous coating with super wear resistance
Yongxin Wang et al.
VACUUM (2018)
A novel treatment for cutting tools for reducing the chipping and improving tool life during machining of Inconel 718
Maryam Aramesh et al.
WEAR (2018)
Fretting corrosion between bone and calcium phosphate-calcium titanate coatings
J. Esguerra-Arce et al.
WEAR (2018)
Friction reduction through biologically inspired scale-like laser surface textures
Johannes Schneider et al.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2018)
Research Progress in Application of 2D Materials in Liquid-Phase Lubrication System
Lincong Liu et al.
MATERIALS (2018)
Understanding the tribological impacts of alkali element on lubrication of binary borate melt
Bach H. Tran et al.
RSC ADVANCES (2018)
Complexity, rate, and scale in sliding friction dynamics between a finger and textured surface
Behnam Khojasteh et al.
SCIENTIFIC REPORTS (2018)
Impact of finger biophysical properties on touch gestures and tactile perception: Aging and gender effects
A. Abdouni et al.
SCIENTIFIC REPORTS (2018)
Effects of dynamic aging on the wear and fracture strength of monolithic zirconia restorations
Isil Sarikaya et al.
BMC ORAL HEALTH (2018)
Micromotion of Immediately Loaded Zirconia Dental Implants for Various Parametric Conditions: A Three-Dimensional Finite Element Study
Duraisamy Velmurugan et al.
JOURNAL OF BIOMATERIALS AND TISSUE ENGINEERING (2018)
Superlubricity of Graphite Sliding against Graphene Nanoflake under Ultrahigh Contact Pressure
Jinjin Li et al.
ADVANCED SCIENCE (2018)
Liquid secretion and setal compliance: the beetle's winning combination for a robust and reversible adhesion
Tristan Gilet et al.
CURRENT OPINION IN INSECT SCIENCE (2018)
Direct fabrication of graphite-mica heterojunction and in situ control of their relative orientation
Bingtong Liu et al.
MATERIALS & DESIGN (2018)
Degradation phenomena occurring in the conical taper of a short-term retrieved ZTA femoral head: A case study
A. Rondinella et al.
MATERIALS & DESIGN (2018)
Assessing the accumulated stickiness magnitude from fabric-skin friction: effect of wetness level of various fabrics
Ka-Po Maggie Tang et al.
ROYAL SOCIETY OPEN SCIENCE (2018)
Single asperity friction in the wear regime
Yongjian Yang et al.
FRICTION (2018)
Adhesive wear and particle emission: Numerical approach based on asperity-free formulation of Rabinowicz criterion
Valentin L. Popov et al.
FRICTION (2018)
60 years of Rabinowicz' criterion for adhesive wear
Elena Popova et al.
FRICTION (2018)
Effect of oxide film on nanoscale mechanical removal of pure iron
Jinwei Liu et al.
FRICTION (2018)
Adhesive wear mechanisms uncovered by atomistic simulations
Jean-Francois Molinari et al.
FRICTION (2018)
Combined effect of boundary layer formation and surface smoothing on friction and wear rate of lubricated point contacts during normal running-in processes
Yazhao Zhang et al.
FRICTION (2018)
Boundary Lubrication Mechanisms for High-Performance Friction Modifiers
Xingliang He et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Superlubricity of Black Phosphorus as Lubricant Additive
Wei Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Macroscale Superlubricity Enabled by the Synergy Effect of Graphene-Oxide Nanoflakes and Ethanediol
Xiangyu Ge et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Mixing Poly(ethylene glycol) and Poly(2-alkyl-2-oxazoline)s Enhances Hydration and Viscoelasticity of Polymer Brushes and Determines Their Nanotribological and Antifouling Properties
Giulia Morgese et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Colloidal suspension of graphene oxide in ionic liquid as lubricant
Tingxia He et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2018)
Influence of Geometric Design Variable and Bone Quality on Stress Distribution for Zirconia Dental Implants-A 3D Finite Element Analysis
Duraisamy Velmurugan et al.
CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES (2018)
Influence of confinement on flow and lubrication properties of a salt model ionic liquid investigated with molecular dynamics
Miljan Dasic et al.
EUROPEAN PHYSICAL JOURNAL E (2018)
Preparation and tribological properties of Ag nanoparticles/reduced graphene oxide nanocomposites
Leihua Xu et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2018)
Understanding the Friction Reduction Mechanism Based on Molybdenum Disulfide Tribofilm Formation and Removal
Dichu Xu et al.
LANGMUIR (2018)
Microstructure, Mechanical Properties, and Sliding Wear Behavior of Spark Plasma Sintered Ti-Cu Alloys
Rui Dong et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
MoS2/Montmorillonite Nanocomposite: Preparation, Tribological Properties, and Inner Synergistic Lubrication
Lehua Cheng et al.
NANO (2018)
Investigation on the Gradient Nanomechanical Behavior of Dental Fluorosis Enamel
Jie Min et al.
NANOSCALE RESEARCH LETTERS (2018)
Stability and Roughness of Interfaces in Mechanically Regulated Tissues
John J. Williamson et al.
PHYSICAL REVIEW LETTERS (2018)
Limiting conditions for application of PVD (TiAlN) and CVD (TiCN/Al2O3/TiN) coated cemented carbide grades in the turning of hardened steels
Denis Boing et al.
WEAR (2018)
Characterization of the microscopic tribological properties of sandfish (Scincus scincus) scales by atomic force microscopy
Weibin Wu et al.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2018)
Tribological Behavior of Lamellar Molybdenum Trioxide as a Lubricant Additive
Wei Tang et al.
MATERIALS (2018)
Lubrication Performance of Graphene as Lubricant Additive in 4-n-pentyl-4 '-cyanobiphyl Liquid Crystal (5CB) for Steel/Steel Contacts
Zhiliang Li et al.
MATERIALS (2018)
Ultralow Interlayer Friction of Layered Electride Ca2N: A Potential Two-Dimensional Solid Lubricant Material
Jianjun Wang et al.
MATERIALS (2018)
Temperature-dependent structural transformation and friction behavior of nanocomposite VCN-(Ag) coatings
Andrey V. Bondarev et al.
MATERIALS & DESIGN (2018)
Comment on van Casteren et al. (2018): softer metallic spheres do abrade harder enamel
Jing Xia et al.
ROYAL SOCIETY OPEN SCIENCE (2018)
3D numerical wear model for determining the change in surface topography
Deepak K. Prajapati et al.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2018)
Friction-limited cell motility in confluent monolayer tissue
Amalie Christensen et al.
PHYSICAL BIOLOGY (2018)
Microstructure and Tribocorrosion Properties of Pulsed Plasma Nitrided Cast CoCr Alloy for Dental Implant Applications
F. Mindivan et al.
ACTA PHYSICA POLONICA A (2018)
Advances in Tribology of Lubricin and Lubricin-Like Synthetic Polymer Nanostructures
Ilker S. Bayer
LUBRICANTS (2018)
Dispersion Stability and Lubrication Performance Correlation of Vegetable Oil-In-Water Emulsions with Nanoparticle-Shielded Oil Droplets
Reza Taheri et al.
LUBRICANTS (2018)
Ab Initio Molecular Dynamics Simulation of Tribochemical Reactions Involving Phosphorus Additives at Sliding Iron Interfaces
Sophie Loehle et al.
LUBRICANTS (2018)
A Preliminary Study to Enhance the Tribological Performance of CoCrMo Alloy by Fibre Laser Remelting for Articular Joint Implant Applications
Chi-Wai Chan et al.
LUBRICANTS (2018)
Acetabular Cups in 60 mm Metal-on-Metal Bearings Subjected to Dynamic Edge-Loading with 70° Peak-Inclination in 10-Million Cycle Simulator Study
Ian C. Clarke et al.
LUBRICANTS (2018)
Reduction of Metallosis in Hip Implant Using Thin Film Coating
R. Rajeshshyam et al.
ADVANCES IN MECHANICAL DESIGN, MATERIALS AND MANUFACTURE (2018)
Molecular Mechanisms Underlying Lubrication by Ionic Liquids: Activated Slip and Flow
Mengwei Han et al.
LUBRICANTS (2018)
Ex-Vivo Cow Skin Viscoelastic Effect for Tribological Aspects in Endoprosthesis
K. A. Subhi et al.
9TH INTERNATIONAL CONFERENCE ON TRIBOLOGY (BALKANTRIB'17) (2018)
The Effect of Coatings on the Wear Behavior of Ti6Al4V Alloy Used in Biomedical Applications
S. Danisman et al.
9TH INTERNATIONAL CONFERENCE ON TRIBOLOGY (BALKANTRIB'17) (2018)
Tactile Feels in Grasping/Cutting Processes with Scissors
Mioto Waga et al.
TECHNOLOGIES (2018)
Synthesis, characterization, and performance evaluation of N,N-Dimethylacrylamide-alkyl acrylate copolymers as novel multifunctional additives for lube oil
Raj K. Singh et al.
ADVANCES IN POLYMER TECHNOLOGY (2018)
Streamlined Vessels for Speedboats: Macro Modifications of Shark Skin Design Applications
M. D. Ibrahim et al.
IRAGO CONFERENCE 2017: A 360-DEGREE OUTLOOK ON CRITICAL SCIENTIFIC AND TECHNOLOGICAL CHALLENGES FOR A SUSTAINABLE SOCIETY (2018)
Influence of pH on the Tribological Properties of DLC-Coated Ti-6Al-4V Titanium Alloy
Katarzyna Pawelec et al.
XIII INTERNATIONAL CONFERENCE ELECTROMACHINING 2018 (2018)
Experimental Investigations into the Mechanical, Tribological, and Corrosion Properties of Hybrid Polymer Matrix Composites Comprising Ceramic Reinforcement for Biomedical Applications
Mohammed Yunus et al.
INTERNATIONAL JOURNAL OF BIOMATERIALS (2018)
Integrated Taguchi-Artificial Neural Network Approach for Modeling and Optimization of Wear Performance of Si3N4-hBN Composite
Sachin Ghalme et al.
PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON MECHANICAL AND MATERIALS SCIENCE ENGINEERING: INNOVATION AND RESEARCH-2018 (ICMMSE:IR 2018) (2018)
Synthesis of Composite Nanosheets of Graphene and Boron Nitride and Their Lubrication Application in Oil
Yuchen Liu et al.
ADVANCED ENGINEERING MATERIALS (2018)
Analysis on Wear Phenomenon of Artificial Knee Joint Based on FEM and Mechanical Test
Yeo-Kyung Kang et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2018)
Mechanical performance of cement- and screw-retained all-ceramic single crowns on dental implants
Matthias Obermeier et al.
CLINICAL ORAL INVESTIGATIONS (2018)
Friction- and Wear-Reducing Properties of Multifunctional Small Molecules
L. Cosimbescu et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Theoretical Analysis of the Influence of Asperity's Dimensions Affected by a Scale Factor on the Mixed Lubrication between Parallel Surfaces
F. Robbe-Valloire et al.
ADVANCES IN TRIBOLOGY (2018)
The sensitivity of contact stresses in the mandibular premolar region to the shape of Zirconia dental implant: A 3D finite element study
Duraisamy Velmurugan et al.
POLISH JOURNAL OF MEDICAL PHYSICS AND ENGINEERING (2018)
The Topology of the Leg Joints of the Beetle Pachnoda marginata (Scarabaeidae, Cetoniinae) and Its Implication for the Tribological Properties
Steffen Vagts et al.
BIOMIMETICS (2018)
Superlubricity controlled by the multiatomic nature of nanocontacts
Ali Sadeghi
PHYSICAL REVIEW B (2018)
Boundary element method for normal non-adhesive and adhesive contacts of power-law graded elastic materials
Qiang Li et al.
COMPUTATIONAL MECHANICS (2018)
Finite Element Design Optimization of a Hyaluronic Acid-Based Hydrogel Drug Delivery Device for Improved Retention
Jourdan Colter et al.
ANNALS OF BIOMEDICAL ENGINEERING (2018)
Friction and Wear Characteristics of Surface-Modified Titanium Alloy for Metal-on-Metal Hip Joint Bearing
Hyeon-hwa Lee et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2018)
Dental microwear textural analysis as an analytical tool to depict individual traits and reconstruct the diet of a primate
Alice M. Percher et al.
AMERICAN JOURNAL OF PHYSICAL ANTHROPOLOGY (2018)
To Evaluate the Severity, Distribution of Occlusal Tooth Wear and its Correlation with Bite Force in Young North Indian Adults
Mandeep Kumar et al.
OPEN DENTISTRY JOURNAL (2018)
A Novel Approach for Modeling Surface Effects in Hydrodynamic Lubrication
Michael Pusterhofer et al.
LUBRICANTS (2018)
Are Ionic Liquids Good Boundary Lubricants? A Molecular Perspective
Romain Lhermerout et al.
LUBRICANTS (2018)
Nanometer-Thick Ionic Liquids as Boundary Lubricants
Xiao Gong et al.
ADVANCED ENGINEERING MATERIALS (2018)
Growth of MoS2 Nanotubes Templated by Halloysite Nanotubes for the Reduction of Friction in Oil
Pei-Rong Wu et al.
ACS OMEGA (2018)
Wear Resistance Limited by Step Edge Failure: The Rise and Fall of Graphene as an Atomically Thin Lubricating Material
Yizhou Qi et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Experimental study on influence of dimples on lubrication performance of glass fiber-epoxy resin composite under natural seawater lubrication
Wu Shaofeng et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2017)
An explicit matrix algorithm for solving three-dimensional elastic wedge under surface loads
L. Guo et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
Multifunctional Bi-Layered Tribofilm Generated on Steel Contact Interfaces under High -Temperature Melt Lubrication
Bach H. Tran et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2017)
Anomalous Frictional Behaviors of Ir and Au Tips Sliding on Graphene/Ni(111) Substrate: Density Functional Theory Calculations
Lei Gao et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2017)
Superlubricity of a graphene/MoS2 heterostructure: a combined experimental and DFT study
Linfeng Wang et al.
NANOSCALE (2017)
On the debris-level origins of adhesive wear
Ramin Aghababaei et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)
Structure and high temperature tribological behavior of TiAlN/nitride duplex treated coatings on Ti6Al4V
Ruili Niu et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Modeling of elastic finite-length space rolling-sliding contact problem
Haibo Zhang et al.
TRIBOLOGY INTERNATIONAL (2017)
Effect of Sliding History on Super-Low Friction of Diamond-Like Carbon Coating in Water Lubrication
Yasunori Niiyama et al.
TRIBOLOGY LETTERS (2017)
Meeting the Contact-Mechanics Challenge
Martin H. Mueser et al.
TRIBOLOGY LETTERS (2017)
Effects of ultrasonic nanocrystal surface modification on the wear and micropitting behavior of bearing steel in boundary lubricated steel-steel contacts
Haifeng Qin et al.
WEAR (2017)
Evolution of tribo-induced interfacial nanostructures governing superlubricity in a-C:H and a-C:H:Si films
Xinchun Chen et al.
NATURE COMMUNICATIONS (2017)
Robust microscale superlubricity under high contact pressure enabled by graphene-coated microsphere
Shu-Wei Liu et al.
NATURE COMMUNICATIONS (2017)
Stacking stability and sliding mechanism in weakly bonded 2D transition metal carbides by van der Waals force
H. Zhang et al.
RSC ADVANCES (2017)
Preparation of TiO2/Ti3C2Tx hybrid nanocomposites and their tribological properties as base oil lubricant additives
Maoquan Xue et al.
RSC ADVANCES (2017)
Manufacturing of FeCoCrNiCux medium-entropy alloy coating using laser cladding technology
Yangchuan Cai et al.
MATERIALS & DESIGN (2017)
Tribology of multilayer coatings for wear reduction: A review
Mahdi Khadem et al.
FRICTION (2017)
Computational investigation of the lubrication behaviors of dioxides and disulfides of molybdenum and tungsten in vacuum
Jingyan Nian et al.
FRICTION (2017)
Material removal mechanism of copper chemical mechanical polishing with different particle sizes based on quasi-continuum method
Aibin Zhu et al.
FRICTION (2017)
Aqueous lubrication and surface microstructures of engineering polymer materials (PEEK and PI) when sliding against Si3N4
Anying Wang et al.
FRICTION (2017)
Design and application of friction pair surface modification coating for remanufacturing
Haidou Wang et al.
FRICTION (2017)
Suppressing Nanoscale Wear by Graphene/Graphene Interfacial Contact Architecture: A Molecular Dynamics Study
Qiang Xu et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Computational Study of Low Interlayer Friction in Tin+1Cn (n=1, 2, and 3) MXene
Difan Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Tribological Behavior of NiAI-Layered Double Hydroxide Nanoplatelets as Oil-Based Lubricant Additives
Hongdong Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Poly(alkyl methacrylate) Brush-Grafted Silica Nanoparticles as Oil Lubricant Additives: Effects of Alkyl Pendant Groups on Oil Dispersibility, Stability, and Lubrication Property
Bryan T. Seyrnour et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Comparison of solidity and fractal dimension of plasma sprayed splat with different spreading morphologies
Shu-ying Chen et al.
APPLIED SURFACE SCIENCE (2017)
Moire superlattice-level stick-slip instability originated from geometrically corrugated graphene on a strongly interacting substrate
Ruoyu Shi et al.
2D MATERIALS (2017)
Atomistic mechanisms of Si chemical mechanical polishing in aqueous H2O2: ReaxFF reactive molecular dynamics simulations
Jialin Wen et al.
COMPUTATIONAL MATERIALS SCIENCE (2017)
Fretting Wear of NiTi - Shape-Memory Alloy
Marcin Klekotka et al.
INNOVATIONS IN BIOMEDICAL ENGINEERING (2017)
AFM Studies on Liquid Superlubricity between Silica Surfaces Achieved with Surfactant Micelles
Jinjin Li et al.
LANGMUIR (2016)
Investigation of running-in process in water-based lubrication aimed at achieving super-low friction
Mingming Deng et al.
TRIBOLOGY INTERNATIONAL (2016)
A Stress-Criterion-Based Model for the Prediction of the Size of Wear Particles in Boundary Lubricated Contacts
Aydar Akchurin et al.
TRIBOLOGY LETTERS (2016)
Fast High-Resolution Simulation of the Gross Slip Wear of Axially Symmetric Contacts
A. V. Dimaki et al.
TRIBOLOGY TRANSACTIONS (2016)
Critical length scale controls adhesive wear mechanisms
Ramin Aghababaei et al.
NATURE COMMUNICATIONS (2016)
Robust ultra-low-friction state of graphene via moire superlattice confinement
Xiaohu Zheng et al.
NATURE COMMUNICATIONS (2016)
Thin film lubrication in the past 20 years
Liran Ma et al.
FRICTION (2016)
A Multiscale Study on the Wall Slip Effect in a Ceramic-Steel Contact With Nanometer-Thick Lubricant Film by a Nano-to-Elastohydrodynamic Lubrication Approach
D. Savio et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2015)
Macroscale superlubricity enabled by graphene nanoscroll formation
Diana Berman et al.
SCIENCE (2015)
Origins of hydration lubrication
Liran Ma et al.
NATURE COMMUNICATIONS (2015)
Superlubricity of silicone oil achieved between two surfaces by running-in with acid solution
Jinjin Li et al.
RSC ADVANCES (2015)
Superlubricity of two-dimensional fluorographene/MoS2 heterostructure: a first-principles study
Lin-Feng Wang et al.
NANOTECHNOLOGY (2014)
Achieving superlubricity in DLC films by controlling bulk, surface, and tribochemistry
Ali Erdemir et al.
FRICTION (2014)
Hydrodynamic effect on the superlubricity of phosphoric acid between ceramic and sapphire
Mingming Deng et al.
FRICTION (2014)
An explicit solution for the elastic quarter-space problem in matrix formulation
Z. M. Zhang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)
Investigations on the mechanism of superlubricity achieved with phosphoric acid solution by direct observation
Jinjin Li et al.
JOURNAL OF APPLIED PHYSICS (2013)
Superlubricity Achieved with Mixtures of Acids and Glycerol
Jinjin Li et al.
LANGMUIR (2013)
Controllable Super lubricity of Glycerol Solution via Environment Humidity
Zhe Chen et al.
LANGMUIR (2013)
Superlubricity Achieved with Mixtures of Polyhydroxy Alcohols and Acids
Jinjin Li et al.
LANGMUIR (2013)
Superlubricity in centimetres-long double-walled carbon nanotubes under ambient conditions
Rufan Zhang et al.
NATURE NANOTECHNOLOGY (2013)
Analysis of Measurement Inaccuracy in Superlubricity Tests
Jinjin Li et al.
TRIBOLOGY TRANSACTIONS (2013)
Excellent Lubricating Behavior of Brasenia schreberi Mucilage
Jinjin Li et al.
LANGMUIR (2012)
Observation of Microscale Superlubricity in Graphite
Ze Liu et al.
PHYSICAL REVIEW LETTERS (2012)
Superlubricity of a Mixed Aqueous Solution
Ma Zhi-Zuo et al.
CHINESE PHYSICS LETTERS (2011)
Superlubricity Behavior with Phosphoric Acid-Water Network Induced by Rubbing
Jinjin Li et al.
LANGMUIR (2011)
Numerical tribology of a dry contact
Mathieu Renouf et al.
TRIBOLOGY INTERNATIONAL (2011)
Superlubricity and tribochemistry of polyhydric alcohols
C. Matta et al.
PHYSICAL REVIEW B (2008)
Friction and wear property of a-CNx coatings sliding against Si3N4 balls in water
Fei Zhou et al.
WEAR (2007)
Simulation of sliding wear in mixed lubrication
Dong Zhu et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2007)
Modelling third body flows with a discrete element method- a tool for understanding wear with adhesive particles
N. Fillot et al.
TRIBOLOGY INTERNATIONAL (2007)
Practical Green's function approach to the simulation of elastic semi-infinite solids
Carlos Campana et al.
PHYSICAL REVIEW B (2006)
Superlubricity of graphite
M Dienwiebel et al.
PHYSICAL REVIEW LETTERS (2004)
Theory of rubber friction and contact mechanics
BNJ Persson
JOURNAL OF CHEMICAL PHYSICS (2001)