Related references
Note: Only part of the references are listed.Electrochemical response of n-type bismuth telluride based thermoelectric materials in NaCl solutions: A comparison between a single-phase alloy and a nanocomposite containing MoS2 nano-particles
Mohsen K. Keshavarz et al.
ARABIAN JOURNAL OF CHEMISTRY (2020)
Solid-state yet flexible supercapacitors made by inkjet-printing hybrid ink of carbon quantum dots/graphene oxide platelets on paper
Jie Liu et al.
SCIENCE CHINA-MATERIALS (2019)
To inhibit coffee ring effect in inkjet printing of light-emitting polymer films by decreasing capillary force
Xinhong Yu et al.
CHINESE CHEMICAL LETTERS (2019)
Recent Developments in Printing Flexible and Wearable Sensing Electronics for Healthcare Applications
Saleem Khan et al.
SENSORS (2019)
All-Printed Human Activity Monitoring and Energy Harvesting Device for Internet of Thing Applications
Shawkat Ali et al.
SENSORS (2019)
Inkjet printed electrochemical aptasensor for detection of Hg2+ in organic solvents
Susana Diaz-Amaya et al.
ELECTROCHIMICA ACTA (2019)
Inkjet Printed Nanopatterned Aptamer-Based Sensors for Improved Optical Detection of Foodborne Pathogens
Susana Diaz-Amaya et al.
SMALL (2019)
Low-Power, High-Performance, Non-volatile Inkjet-Printed HfO2-Based Resistive Random Access Memory: From Device to Nanoscale Characterization
Giovanni Vescio et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Inkjet Printing of Latex-Based High-Energy Microcapacitors
Fernando Torres-Canas et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
Inkjet printed graphene as an interconnect for optoelectronic devices
Jay A. Desai et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)
Inkjet-Printed High-Performance Flexible Micro-Supercapacitors with Porous Nanofiber-Like Electrode Structures
Tao Cheng et al.
SMALL (2019)
Inkjet-printed stretchable and low voltage synaptic transistor array
F. Molina-Lopez et al.
NATURE COMMUNICATIONS (2019)
Additive-free MXene inks and direct printing of micro-supercapacitors
Chuanfang (John) Zhang et al.
NATURE COMMUNICATIONS (2019)
All Inkjet-Printed Graphene-Silver Composite Ink on Textiles for Highly Conductive Wearable Electronics Applications
Nazmul Karim et al.
SCIENTIFIC REPORTS (2019)
Inkjet Printing of Functional Electronic Memory Cells: A Step Forward to Green Electronics
Iulia Salaoru et al.
MICROMACHINES (2019)
Graphene-Based Sensors for Human Health Monitoring
Haizhou Huang et al.
FRONTIERS IN CHEMISTRY (2019)
Protecting the Nanoscale Properties of Ag Nanowires with a Solution-Grown SnO2 Monolayer as Corrosion Inhibitor
Yang Zhao et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)
Printable Fabrication of a Fully Integrated and Self-Powered Sensor System on Plastic Substrates
Yuanjing Lin et al.
ADVANCED MATERIALS (2019)
Facile fabrication of ZnO nanowire memory device based on chemically-treated surface defects
Woojin Park et al.
NANOTECHNOLOGY (2019)
Layer-by-layer inkjet printing GO film and Ag nanoparticles supported nickel cobalt layered double hydroxide as a flexible and binder-free electrode for supercapacitors
Xueying Li et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)
Oxygen Saturation Measurements from Green and Orange Illuminations of Multi-Wavelength Optoelectronic Patch Sensors
Samah Alharbi et al.
SENSORS (2019)
Recent Progress in Inkjet-Printed Thin-Film Transistors
Seungjun Chung et al.
ADVANCED SCIENCE (2019)
Freestanding Ion Gels for Flexible, Printed, Multifunctional Microsupercapacitors
Donghoon Song et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Chitosan biopolymer-derived self-powered triboelectric sensor with optimized performance through molecular surface engineering and data-driven learning
Chenxiang Ma et al.
INFOMAT (2019)
Recent progress in inkjet-printed solar cells
Santhosh Kumar Karunakaran et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Energy storage on demand: ultra-high-rate and high-energy-density inkjet-printed NiO micro-supercapacitors
Pavlos Giannakou et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Flexible thermoelectric generators with inkjet-printed bismuth telluride nanowires and liquid metal contacts
Bolin Chen et al.
NANOSCALE (2019)
Scalable nanomanufacturing of inkjet-printed wearable energy storage devices
Tao-Tse Huang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Wearable high-dielectric-constant polymers with core-shell liquid metal inclusions for biomechanical energy harvesting and a self-powered user interface
Shengjie Gao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Super-flexible perovskite solar cells with high power-per-weight on 17 μm thick PET substrate utilizing printed Ag nanowires bottom and top electrodes
Menglan Xie et al.
FLEXIBLE AND PRINTED ELECTRONICS (2019)
Flexible fiber-based optoelectronics for neural interfaces
Seongjun Park et al.
CHEMICAL SOCIETY REVIEWS (2019)
Recent progress of self-powered wearable monitoring systems integrated with microsupercapacitors
Y. Lu et al.
MATERIALS TODAY NANO (2019)
3D printed electrochemical energy storage devices
Peng Chang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Inkjet Printed Large-Area Flexible Few-Layer Graphene Thermoelectrics
Taneli Juntunen et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Self-Powered Wearable Electronics Based on Moisture Enabled Electricity Generation
Daozhi Shen et al.
ADVANCED MATERIALS (2018)
Effects of coffee ring via inkjet printing seed layers on field emission properties of patterned ZnO nanorods
Lei Sun et al.
CERAMICS INTERNATIONAL (2018)
A flexible nonvolatile resistive switching memory device based on ZnO film fabricated on a foldable PET substrate
Bai Sun et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2018)
Low Cost Inkjet Fabrication of Glucose Electrochemical Sensors Based on Copper Oxide
R. Bernasconi et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Inkjet-printed resistive memory cells for transparent electronics
B. Huber et al.
MICROELECTRONIC ENGINEERING (2018)
Development, applications, and future directions of triboelectric nanogenerators
Mingyuan Ma et al.
NANO RESEARCH (2018)
Optoelectronic system for brain neuronal network stimulation
Mikhail A. Mishchenko et al.
PLOS ONE (2018)
Microscale optoelectronic infrared-to-visible upconversion devices and their use as injectable light sources
He Ding et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2018)
A review on bismuth telluride (Bi2Te3) nanostructure for thermoelectric applications
Hayati Mamur et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Inkjet printing for the fabrication of flexible/stretchable wearable electronic devices and sensors
Alaaldeen Al-Halhouli et al.
SENSOR REVIEW (2018)
All-printed triboelectric nanogenerator
Myeong-Lok Seol et al.
NANO ENERGY (2018)
Inkjet-Printed and Paper-Based Electrochemical Sensors
Ryan P. Tortorich et al.
APPLIED SCIENCES-BASEL (2018)
A fluorene-terminated hole-transporting material for highly efficient and stable perovskite solar cells
Nam Joong Jeon et al.
NATURE ENERGY (2018)
In situ immune response and mechanisms of cell damage in central nervous system of fatal cases microcephaly by Zika virus
Raimunda S. S. Azevedo et al.
SCIENTIFIC REPORTS (2018)
Atom-economical construction of carbon nanotube architectures for flexible supercapacitors with ultrahigh areal and volumetric capacities
Zhenhua Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
A novel design of hybrid transparent electrodes for high performance and ultra-flexible bifunctional electrochromic-supercapacitors
Riski Titian Ginting et al.
NANO ENERGY (2018)
Simultaneous Monitoring of Sweat and Interstitial Fluid Using a Single Wearable Biosensor Platform
Jayoung Kim et al.
ADVANCED SCIENCE (2018)
Toward High Areal Energy and Power Density Electrode for Li-Ion Batteries via Optimized 3D Printing Approach
Jiwei Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Electrically conductive polymer composites for smart flexible strain sensors: a critical review
Hu Liu et al.
JOURNAL OF MATERIALS CHEMISTRY C (2018)
360 degrees omnidirectional, printable and transparent photodetectors for flexible optoelectronics
Der-Hsien Lien et al.
NPJ FLEXIBLE ELECTRONICS (2018)
High-Performance Ultrathin Flexible Solid-State Supercapacitors Based on Solution Processable Mo1.33C MXene and PEDOT:PSS
Leiqiang Qin et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Printed thermoelectric materials and devices: Fabrication techniques, advantages, and challenges
Michael Orrill et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Air Processed Inkjet Infiltrated Carbon Based Printed Perovskite Solar Cells with High Stability and Reproducibility
Syed Ghufran Hashmi et al.
ADVANCED MATERIALS TECHNOLOGIES (2017)
Soft, stretchable, high power density electronic skin-based biofuel cells for scavenging energy from human sweat
Amay J. Bandodkar et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
SiO2 based conductive bridging random access memory
Wenhao Chen et al.
JOURNAL OF ELECTROCERAMICS (2017)
Implantable optoelectronic probes for in vivo optogenetics
Ege Iseri et al.
JOURNAL OF NEURAL ENGINEERING (2017)
Silver nanowires: Synthesis technologies, growth mechanism and multifunctional applications
Pei Zhang et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2017)
3D printed functional nanomaterials for electrochemical energy storage
Cheng Zhu et al.
NANO TODAY (2017)
Inkjet-printed optoelectronics
Zhaoyao Zhan et al.
NANOSCALE (2017)
All-inkjet-printed flexible ZnO micro photodetector for a wearable UV monitoring device
Van-Thai Tran et al.
NANOTECHNOLOGY (2017)
Water-based and biocompatible 2D crystal inks for all-inkjet-printed heterostructures
Daryl McManus et al.
NATURE NANOTECHNOLOGY (2017)
Flexible Near-Field Wireless Optoelectronics as Subdermal Implants for Broad Applications in Optogenetics
Gunchul Shin et al.
NEURON (2017)
All-printed thin-film transistors from networks of liquid-exfoliated nanosheets
Adam G. Kelly et al.
SCIENCE (2017)
Fully inkjet-printed two-dimensional material field-effect heterojunctions for wearable and textile electronics
Tian Carey et al.
NATURE COMMUNICATIONS (2017)
All inkjet-printed piezoelectric electronic devices: energy generators, sensors and actuators
Damien Thuau et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
Inkjet printing wearable electronic devices
Meng Gao et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
Engineering of carbon nanotube/polydimethylsiloxane nanocomposites with enhanced sensitivity for wearable motion sensors
Qi Li et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
Silver nanowires: Synthesis technologies, growth mechanism and multifunctional applications
Pei Zhang et al.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2017)
All-inkjet-printed flexible piezoelectric generator made of solvent evaporation assisted BaTiO3 hybrid material
Jongwoo Lim et al.
NANO ENERGY (2017)
Flexible planar concentric circular micro-supercapacitor arrays for wearable gas sensing application
La Li et al.
NANO ENERGY (2017)
Inkjet-Printing: A New Fabrication Technology for Organic Transistors
Giorgio Mattana et al.
ADVANCED MATERIALS TECHNOLOGIES (2017)
Sensitivity enhancement of flexible gas sensors via conversion of inkjet-printed silver electrodes into porous gold counterparts
Yunnan Fang et al.
SCIENTIFIC REPORTS (2017)
Low-temperature (70 °C) ambient air plasma-fabrication of inkjet-printed mesoporous TiO2 flexible photoanodes
Tomas Homola et al.
FLEXIBLE AND PRINTED ELECTRONICS (2017)
Inkjet-Printed Small-Molecule Organic Light-Emitting Diodes: Halogen-Free Inks, Printing Optimization, and Large-Area Patterning
Lu Zhou et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Scalable Fabrication and Integration of Graphene Microsupercapacitors through Full Inkjet Printing
Jiantong Li et al.
ACS NANO (2017)
Fully inkjet printed flexible resistive memory
B. Huber et al.
APPLIED PHYSICS LETTERS (2017)
Low-Thermal-Budget Photonic Processing of Highly Conductive Cu Interconnects Based on CuO Nanoinks: Potential for Flexible Printed Electronics
Matthew S. Rager et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
A Wearable Electrochemical Platform for Noninvasive Simultaneous Monitoring of Ca2+ and pH
Hnin Yin Yin Nyein et al.
ACS Nano (2016)
Inkjet Printing of a Highly Loaded Palladium Ink for Integrated, Low-Cost pH Sensors
Yiheng Qin et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Flexible Hybrid Electronics: Direct Interfacing of Soft and Hard Electronics for Wearable Health Monitoring
Yasser Khan et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Impacts of Co doping on ZnO transparent switching memory device characteristics
Firman Mangasa Simanjuntak et al.
APPLIED PHYSICS LETTERS (2016)
Inkjet-printed bifunctional carbon nanotubes for pH sensing
Yiheng Qin et al.
MATERIALS LETTERS (2016)
Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis
Wei Gao et al.
NATURE (2016)
Inkjet-Printed Organic Transistors Based on Organic Semiconductor/Insulating Polymer Blends
Yoon-Jung Kwon et al.
Materials (2016)
Multipass inkjet printed planar methylammonium lead iodide perovskite solar cells
Florian Mathies et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Micro/nanostructured surfaces for self-powered and multifunctional electronic skins
Jonghwa Park et al.
JOURNAL OF MATERIALS CHEMISTRY B (2016)
Inkjet Printed Single-Walled Carbon Nanotube Based Ambipolar and Unipolar Transistors for High-Performance Complementary Logic Circuits
Sadir Gabriele Bucella et al.
ADVANCED ELECTRONIC MATERIALS (2016)
A Disposable paper breathalyzer with an alcohol sensing organic electrochemical transistor
Eloise Bihar et al.
SCIENTIFIC REPORTS (2016)
Bendable Electro-chemical Lactate Sensor Printed with Silver Nanoparticles
Md Abu Abrar et al.
SCIENTIFIC REPORTS (2016)
Inkjet-Printed Graphene/PEDOT:PSS Temperature Sensors on a Skin-Conformable Polyurethane Substrate
Tiina Vuorinen et al.
SCIENTIFIC REPORTS (2016)
Elastomeric nanowire composite for flexible pressure sensors with tunable sensitivity
Yunsik Joo et al.
JOURNAL OF INFORMATION DISPLAY (2016)
Fabrication of organic solar cells with design blend P3HT: PCBM variation of mass ratio
Agus Supriyanto et al.
10TH JOINT CONFERENCE ON CHEMISTRY (2016)
Nanopatterned Textile-Based Wearable Triboelectric Nanogenerator
Wanchul Seung et al.
ACS NANO (2015)
Novel Hybrid Organic Thermoelectric Materials: Three-Component Hybrid Films Consisting of a Nanoparticle Polymer Complex, Carbon Nanotubes, and Vinyl Polymer
Naoki Toshima et al.
ADVANCED MATERIALS (2015)
Highly reproducible, hysteresis-free, flexible strain sensors by inkjet printing of carbon nanotubes
Fulvio Michelis et al.
CARBON (2015)
Printing nanostructured carbon for energy storage and conversion applications
Stephen Lawes et al.
CARBON (2015)
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Saleem Khan et al.
IEEE SENSORS JOURNAL (2015)
Silver nanowire-embedded PDMS with a multiscale structure for a highly sensitive and robust flexible pressure sensor
Yunsik Joo et al.
NANOSCALE (2015)
Resistive and New Optical Switching Memory Characteristics Using Thermally Grown Ge0.2Se0.8 Film in Cu/GeSex/W Structure
Debanjan Jana et al.
NANOSCALE RESEARCH LETTERS (2015)
Highly Conductive Aromatic Functionalized Multi-Walled Carbon Nanotube for Inkjet Printable High Performance Supercapacitor Electrodes
Sanjeev K. Ujjain et al.
PLOS ONE (2015)
Memristive behaviour in inkjet printed graphene oxide thin layers
S. Porro et al.
RSC ADVANCES (2015)
Highly oriented BaTiO3 film self-assembled using an interfacial strategy and its application as a flexible piezoelectric generator for wind energy harvesting
Tao Gao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Flexible all-solid-state asymmetric supercapacitors with three-dimensional CoSe2/carbon cloth electrodes
Neng Yu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Inkjet printing of CH3NH3PbI3 on a mesoscopic TiO2 film for highly efficient perovskite solar cells
Shao-Gang Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Flexible thermoelectric materials and device optimization for wearable energy harvesting
Je-Hyeong Bahk et al.
JOURNAL OF MATERIALS CHEMISTRY C (2015)
Resistive and New Optical Switching Memory Characteristics Using Thermally Grown Ge0.2Se0.8 Film in Cu/GeSex/W Structure
Debanjan Jana et al.
NANOSCALE RESEARCH LETTERS (2015)
Electroforming and resistive switching in silicon dioxide resistive memory devices
Burt W. Fowler et al.
RSC ADVANCES (2015)
Hemispherically Aggregated BaTiO3 Nanoparticle Composite Thin Film for High-Performance Flexible Piezoelectric Nanogenerator
Sung-Ho Shin et al.
ACS NANO (2014)
Unidirectional High-Power Generation via Stress-Induced Dipole Alignment from ZnSnO3 Nanocubes/Polymer Hybrid Piezoelectric Nanogenerator
Keun Young Lee et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Scalable fabrication of high-performance and flexible graphene strain sensors
He Tian et al.
NANOSCALE (2014)
Inkjet-printed flexible organic thin-film thermoelectric devices based on p- and n-type poly(metal 1,1,2,2-ethenetetrathiolate)s/polymer composites through ball-milling
Fei Jiao et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2014)
Tunable inkjet printed hybrid carbon nanotubes/nanocrystals light sensor
E. Katzir et al.
SENSORS AND ACTUATORS B-CHEMICAL (2014)
Fabrication of Flexible Thermoelectric Thin Film Devices by Inkjet Printing
Ziyang Lu et al.
SMALL (2014)
Embedded inkjet printed silver grids for ITO-free organic solar cells with high fill factor
Ignasi Burgues-Ceballos et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2014)
All-organic optoelectronic sensor for pulse oximetry
Claire M. Lochner et al.
NATURE COMMUNICATIONS (2014)
Shifting up the optimum figure of merit of p-type bismuth telluride-based thermoelectric materials for power generation by suppressing intrinsic conduction
Li-Peng Hu et al.
NPG ASIA MATERIALS (2014)
Polymer thermoelectric modules screen-printed on paper
Qingshuo Wei et al.
RSC ADVANCES (2014)
Flexible Miniaturized Nickel Oxide Thermistor Arrays via Inkjet Printing Technology
Chun-Chih Huang et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Metal-Free, Single-Polymer Device Exhibits Resistive Memory Effect
Unnat S. Bhansali et al.
ACS NANO (2013)
Flexible Multi-Colored Electrochromic and Volatile Polymer Memory Devices Derived from Starburst Triarylamine-Based Electroactive Polyimide
Hung-Ju Yen et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
Printed, Flexible, Organic Nano-Floating-Gate Memory: Effects of Metal Nanoparticles and Blocking Dielectrics on Memory Characteristics
Minji Kang et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
Transparent High-Performance Thin Film Transistors from Solution-Processed SnO2/ZrO2 Gel-like Precursors
Jaewon Jang et al.
ADVANCED MATERIALS (2013)
Fully Inkjet-Printed Organic Photodetectors with High Quantum Yield
G. Azzellino et al.
ADVANCED MATERIALS (2013)
Inkjet printed (bio)chemical sensing devices
Nobutoshi Komuro et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2013)
Epidermal Biofuel Cells: Energy Harvesting from Human Perspiration
Wenzhao Jia et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)
Low voltage, high performance inkjet printed carbon nanotube transistors with solution processed ZrO2 gate insulator
Bongjun Kim et al.
APPLIED PHYSICS LETTERS (2013)
Flexible and lightweight thermoelectric generators composed of carbon nanotube-polystyrene composites printed on film substrate
Kouji Suemori et al.
APPLIED PHYSICS LETTERS (2013)
Fabrication of printed memory device having zinc-oxide active nano-layer and investigation of resistive switching
Nauman Malik Muhammad et al.
CURRENT APPLIED PHYSICS (2013)
Flexible Piezoelectric PMN-PT Nanowire-Based Nanocomposite and Device
Shiyou Xu et al.
NANO LETTERS (2013)
A low-cost paper-based inkjet-printed platform for electrochemical analyses
Anni Maattanen et al.
SENSORS AND ACTUATORS B-CHEMICAL (2013)
Development of inkjet printed strain sensors
V. Correia et al.
SMART MATERIALS AND STRUCTURES (2013)
Roll-to-Roll Inkjet Printing and Photonic Sintering of Electrodes for ITO Free Polymer Solar Cell Modules and Facile Product Integration
Dechan Angmo et al.
ADVANCED ENERGY MATERIALS (2013)
Inkjet printing: an integrated and green chemical approach to microfluidic paper-based analytical devices
Kento Maejima et al.
RSC ADVANCES (2013)
Highly Conductive and Transparent PEDOT:PSS Films with a Fluorosurfactant for Stretchable and Flexible Transparent Electrodes
Michael Vosgueritchian et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
Colorimetric Paper Bioassay for the Detection of Phenolic Compounds
Ramiz S. J. Alkasir et al.
ANALYTICAL CHEMISTRY (2012)
Flexible thermoelectric generator for human body heat energy harvesting
S. E. Jo et al.
ELECTRONICS LETTERS (2012)
Inkjet-printed gas sensors: metal decorated WO3 nanoparticles and their gas sensing properties
Jarmo Kukkola et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Organic electrochemical transistor incorporating an ionogel as a solid state electrolyte for lactate sensing
Dion Khodagholy et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
UV-Assisted Chemical Sintering of Inkjet-Printed TiO2 Photoelectrodes for Low-Temperature Flexible Dye-Sensitized Solar Cells
Yeonjun Oh et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Temperature-Dependent Electrical Properties of Graphene Inkjet-Printed on Flexible Materials
De Kong et al.
LANGMUIR (2012)
ITO-free flexible polymer solar cells with ink-jet-printed Ag grids
Seok-In Na et al.
SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2012)
Evaluation of ink-jet printed current collecting grids and busbars for ITO-free organic solar cells
Yulia Galagan et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Environmental and economic assessment of ITO-free electrodes for organic solar cells
Christopher J. M. Emmott et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Energy harvesting based on semiconducting piezoelectric ZnO nanostructures
Brijesh Kumar et al.
NANO ENERGY (2012)
Enhanced nanoscale resistive switching memory characteristics and switching mechanism using high-Ge-content Ge0.5Se0.5 solid electrolyte
Sheikh Ziaur Rahaman et al.
NANOSCALE RESEARCH LETTERS (2012)
Super-Elastic Graphene Ripples for Flexible Strain Sensors
Yi Wang et al.
ACS NANO (2011)
Graphene supercapacitor electrodes fabricated by inkjet printing and thermal reduction of graphene oxide
Linh T. Le et al.
ELECTROCHEMISTRY COMMUNICATIONS (2011)
Paper-based planar reaction arrays for printed diagnostics
Anni Maattanen et al.
SENSORS AND ACTUATORS B-CHEMICAL (2011)
ITO-free flexible organic solar cells with printed current collecting grids
Yulia Galagan et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Electrical Transport and Field-Effect Transistors Using Inkjet-Printed SWCNT Films Having Different Functional Side Groups
Eduardo Gracia-Espino et al.
ACS NANO (2010)
Bulk Heterojunction Polymer Memory Devices with Reduced Graphene Oxide as Electrodes
Juqing Liu et al.
ACS NANO (2010)
Sound-Driven Piezoelectric Nanowire-Based Nanogenerators
Seung Nam Cha et al.
ADVANCED MATERIALS (2010)
Piezoelectric BaTiO3 Thin Film Nanogenerator on Plastic Substrates
Kwi-Il Park et al.
NANO LETTERS (2010)
Inkjet Printing of Single-Walled Carbon Nanotube/RuO2 Nanowire Supercapacitors on Cloth Fabrics and Flexible Substrates
Pochiang Chen et al.
NANO RESEARCH (2010)
Materials and Mechanics for Stretchable Electronics
John A. Rogers et al.
SCIENCE (2010)
Inkjet-printed InGaZnO thin film transistor
Gun Hee Kim et al.
THIN SOLID FILMS (2009)
Inkjet-printed microfluidic multianalyte chemical sensing paper
Koji Abe et al.
ANALYTICAL CHEMISTRY (2008)
Fabrication of single-walled carbon nanotube flexible strain sensors with high sensitivity
Neng-Kai Chang et al.
APPLIED PHYSICS LETTERS (2008)
A rubberlike stretchable active matrix using elastic conductors
Tsuyoshi Sekitani et al.
SCIENCE (2008)
Fabrication of an ammonia gas sensor using inkjet-printed polyaniline nanoparticles
Karl Crowley et al.
TALANTA (2008)
Inkjet printing of transparent, electrically conducting single-waited carbon-nanotube composites
William R. Small et al.
SMALL (2007)
A comprehensive review of ZnO materials and devices -: art. no. 041301
U Ozgür et al.
JOURNAL OF APPLIED PHYSICS (2005)
Wide-bandgap semiconductor ultraviolet photodetectors
E Monroy et al.
SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2003)
Inkjet printing for materials and devices
P Calvert
CHEMISTRY OF MATERIALS (2001)
Share Paper
