Related references
Note: Only part of the references are listed.Sustainability and environmental impact of fused deposition modelling (FDM) technologies
Luis Suarez et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Mechanical and Electrical Properties Investigation of 3D-Printed Acrylonitrile-Butadiene-Styrene Graphene and Carbon Nanocomposites
N. Vidakis et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)
Closed loop supply chain network for local and distributed plastic recycling for 3D printing: a MILP-based optimization approach
Pavlo Santander et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Evaluation of the physico-mechanical properties of activated-carbon enhanced recycled polyethylene/polypropylene 3D printing filament
Siewhui Chong et al.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2020)
Use of recycled polypropylene/poly(ethylene terephthalate) blends to manufacture water pipes: An industrial scale study
Aurea A. Matias et al.
WASTE MANAGEMENT (2020)
Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling: Effect of process parameters on mechanical properties
J. M. Chacon et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Mechanical Recyclability of Polypropylene Composites Produced by Material Extrusion-Based Additive Manufacturing
Martin Spoerk et al.
POLYMERS (2019)
Investigation of Closed-Loop Manufacturing with Acrylonitrile Butadiene Styrene over Multiple Generations Using Additive Manufacturing
Mazher Iqbal Mohammed et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)
The re-usability of heat-exposed poly (ethylene terephthalate) powder for laser sintering
Hao Gu et al.
ADDITIVE MANUFACTURING (2019)
3D printing of high density polyethylene by fused filament fabrication
Carl G. Schirmeister et al.
ADDITIVE MANUFACTURING (2019)
Recycling of fiberglass wind turbine blades into reinforced filaments for use in Additive Manufacturing
Amirmohammad Rahimizadeh et al.
COMPOSITES PART B-ENGINEERING (2019)
Recycled Glass Fiber Composites from Wind Turbine Waste for 3D Printing Feedstock: Effects of Fiber Content and Interface on Mechanical Performance
Amirmohammad Rahimizadeh et al.
MATERIALS (2019)
High-Performance Nylon-6 Sustainable Filaments for Additive Manufacturing
Ilenia Farina et al.
MATERIALS (2019)
Metal matrix composite from recycled materials by using additive manufacturing assisted investment casting
Narinder Singh et al.
COMPOSITE STRUCTURES (2019)
Evaluation of cement paste containing recycled stainless steel powder for sustainable additive manufacturing
Bharath Melugiri-Shankaramurthy et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
A barrier analysis for distributed recycling of 3D printing waste: Taking the maker movement perspective
Bob Peeters et al.
JOURNAL OF CLEANER PRODUCTION (2019)
A comparison between mechanical properties of specimens 3D printed with virgin and recycled PLA
Antonio Lanzotti et al.
12TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING (2019)
Recycled polypropylene blends as novel 3D printing materials
Nicole E. Zander et al.
ADDITIVE MANUFACTURING (2019)
Recyclability of stainless steel (316 L) powder within the additive manufacturing process
Nima E. Gorji et al.
MATERIALIA (2019)
A parametric determination of bending and Charpy's impact strength of ABS and ABS-plus fused deposition modeling specimens
N. Vidakis et al.
PROGRESS IN ADDITIVE MANUFACTURING (2019)
Enhanced mechanical properties of self-polymerized polydopamine-coated recycled PLA filament used in 3D printing
Xing Guan Zhao et al.
APPLIED SURFACE SCIENCE (2018)
Close-looped recycling of polylactic acid used in 3D printing: An experimental investigation and life cycle assessment
Peng Zhao et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Morphologic and mechanical properties of blends from recycled acrylonitrile-butadiene-styrene and high-impact polystyrene
Denise Hirayama et al.
POLYMER (2018)
Tightening the loop on the circular economy: Coupled distributed recycling and manufacturing with recyclebot and RepRap 3-D printing
Shan Zhong et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Fused Particle Fabrication 3-D Printing: Recycled Materials' Optimization and Mechanical Properties
Aubrey L. Woern et al.
MATERIALS (2018)
Local and recyclable materials for additive manufacturing: 3D printing with mussel shells
M. Sauerwein et al.
MATERIALS TODAY COMMUNICATIONS (2018)
A Review on testing methods of recycled Acrylonitrile Butadiene-Styrene
Manish et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Study on mechanical properties of recycled Acrylonitrile Butadiene Styrene (ABS) blended with virgin Acrylonitrile Butadiene Styrene (ABS) using Taguchi method
R. Goutham et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Recycling meal-ready-to-eat (MRE) pouches into polymer filament for material extrusion additive manufacturing
Kevin R. Hart et al.
ADDITIVE MANUFACTURING (2018)
Recycled polyethylene terephthalate as a new FFF feedstock material
Nicole E. Zander et al.
ADDITIVE MANUFACTURING (2018)
Physical Characterization and Pre-assessment of Recycled High-Density Polyethylene as 3D Printing Material
Siewhui Chong et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2017)
Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
Xiaoyong Tian et al.
JOURNAL OF CLEANER PRODUCTION (2017)
On microstructure and mechanical properties of additively manufactured AlSi10Mg_200C using recycled powder
Hamed Asgari et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
3D printing of CNT-and graphene-based conductive polymer nanocomposites by fused deposition modeling
K. Gnanasekaran et al.
APPLIED MATERIALS TODAY (2017)
Polymer recycling in an open-source additive manufacturing context: Mechanical issues
Fabio A. Cruz Sanchez et al.
ADDITIVE MANUFACTURING (2017)
Recycling of plastic solid waste: A state of art review and future applications
Narinder Singh et al.
COMPOSITES PART B-ENGINEERING (2017)
An efficient and recyclable 3D printed α-Al2O3 catalyst for the multicomponent assembly of bioactive heterocycles
Jhonny Azuaje et al.
APPLIED CATALYSIS A-GENERAL (2017)
An additive manufacturing solution to produce big green parts from tires and recycled plastics
J. Domingues et al.
INTERNATIONAL CONFERENCE ON SUSTAINABLE AND INTELLIGENT MANUFACTURING (RESIM 2016) (2017)
Enhanced mechanical and thermal properties of recycled ABS/nitrile rubber/nanofil N15 nanocomposites
Nguyen Dang Mao et al.
COMPOSITES PART B-ENGINEERING (2016)
Thermal characterization of recycled polymer for additive manufacturing applications
K. S. Boparai et al.
COMPOSITES PART B-ENGINEERING (2016)
Recycling of Acrylonitrile-Butadiene-Styrene Using Injection Moulding Machine
Maria de Gracia Trujillo Garcia et al.
9TH INTERNATIONAL CONFERENCE INTERDISCIPLINARITY IN ENGINEERING, INTER-ENG 2015 (2016)
Effect of reprocessing on shrinkage and mechanical properties of ABS and investigating the proper blend of virgin and recycled ABS in injection molding
Mohammad Rahimi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Physical properties of virgin-recycled ABS blends: Effect of post-consumer content and of reprocessing cycles
R. Scaffaro et al.
EUROPEAN POLYMER JOURNAL (2012)
Effects of dispersion and interfacial modification on the macroscale properties of TiO2 polymer-matrix nanocomposites
Lesley M. Hamming et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Share Paper
