Related references
Note: Only part of the references are listed.Intelligent approach for process modelling and optimization on electrical discharge machining of polycrystalline diamond
Pauline Ong et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2020)
Modeling and optimization of the electrical discharge machining process based on a combined artificial neural network and particle swarm optimization algorithm
M. Azadi Moghaddam et al.
SCIENTIA IRANICA (2020)
Modeling, multi-objective optimization and cost estimation of bone drilling under micro-cooling spray technique: an integrated analysis
Muhammad Jamil et al.
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM (2020)
Effects of dielectric fluids on surface integrity for the recast layer in high speed EDM drilling of nickel alloy
Chaojiang Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Machinability analysis of Inconel 601, 625, 718 and 825 during electro-discharge machining: On evaluation of optimal parameters setting
Rahul et al.
MEASUREMENT (2019)
Evaluation of the sustainability of the micro-electrical discharge milling process
G. Pellegrini et al.
ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT (2019)
Multi-Response Optimization of Electrical Discharge Machining Using the Desirability Function
Rafal Swiercz et al.
MICROMACHINES (2019)
Dataset on optimization of EDM machining parameters by using central composite design
A. Soundhar et al.
DATA IN BRIEF (2019)
External force assisted electro discharge machining of SS 316
P. Mukhopadhyay et al.
MATERIALS TODAY-PROCEEDINGS (2019)
Statistical analysis of material removal rate and surface roughness in electrical discharge turning of titanium alloy (Ti-6Al-4V)
Vikas Gohil et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2018)
Optimization of cryo-treated EDM variables using TOPSIS-based TLBO algorithm
Chinmaya Prasad Mohanty et al.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2018)
Effects of Tool Electrode on EDM Performance of Ti-6Al-4V
Rahul et al.
SILICON (2018)
Electro-Discharge Machining of Inconel 825 Super alloy: Effects of Tool Material and Dielectric Flushing
Soni Kumari et al.
SILICON (2018)
Surface Integrity and Metallurgical Characteristics of the EDMed Work Surfaces of A2 Tool Steel (SAE 304SS), Inconel 601 and Ti-6Al-4V: a Comparative Analysis
Rahul et al.
SILICON (2018)
Investigating the effects of different electrodes on Al6061-SiC-7.5 wt% during electric discharge machining
Muhammad Huzaifa Raza et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Influence of electrode tool length on the micro EDM drilling performance
Grzegorz Skrabalak
19TH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (2018)
Effects of Electrode and Workpiece Materials on the Sustainability of Micro-EDM Drilling Process
Gianluca D'Urso et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2018)
Modelling and experimental investigation of process parameters in EDM of Si3N4-TiN composites using GRA-RSM
L. Selvarajan et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)
An intelligent approach to optimize the EDM process parameters using utility concept and QPSO algorithm
Chinmaya P. Mohanty et al.
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2017)
Analysis of Effect of Machining Parameters During Electrical Discharge Machining Using Taguchi-Based Multi-Objective PSO
Abhijit Dey et al.
INTERNATIONAL JOURNAL OF COMPUTATIONAL INTELLIGENCE AND APPLICATIONS (2017)
Optimization of process parameters of green electrical discharge machining using principal component analysis (PCA)
Jagadish et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Electrical discharge machining of the AISI D6 tool steel: Prediction and modeling of the material removal rate and tool wear ratio
Reza Vatankhah Barenji et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2016)
A particle swarm approach for multi-objective optimization of electrical discharge machining process
Chinmaya P. Mohanty et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2016)
Multi-attribute optimization of machining process parameters in powder mixed electro-discharge machining using TOPSIS and grey relational analysis
S. Tripathy et al.
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2016)
Study of surface integrity and dimensional accuracy in EDM using Fuzzy TOPSIS and sensitivity analysis
S. Dewangan et al.
MEASUREMENT (2015)
Experimental modeling and multiobjective optimization of electrical discharge drilling of aerospace superalloy material
Umacharn Singh Yadav et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)
Investigation on the influence of the dielectrics on the material removal characteristics of EDM
Yanzhen Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
A hybrid Taguchi-artificial neural network approach to predict surface roughness during electric discharge machining of titanium alloys
Sanjeev Kumar et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2014)
Electrical discharge machining parameters optimization using response surface methodology and fuzzy logic modeling
S. Prabhu et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2014)
Application of the Entropy Weight and TOPSIS Method on Al-12% SiC Metal Matrix Composite during EDM
Rajesh Kumar Bhuyan et al.
INTERNATIONAL JOURNAL OF MANUFACTURING MATERIALS AND MECHANICAL ENGINEERING (2014)
An approach to optimize the EDM process parameters using desirability-based multi-objective PSO
Arindam Majumder et al.
PRODUCTION AND MANUFACTURING RESEARCH-AN OPEN ACCESS JOURNAL (2014)
Influence of parameters and optimization of EDM performance measures on MDN 300 steel using Taguchi method
A. M. Nikalje et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Multiobjective Optimization of Electrical Discharge Machining Process Using a Hybrid Method
Sunil Sheshrao Baraskar et al.
MATERIALS AND MANUFACTURING PROCESSES (2013)
Influence of Discharge Current Pulse on Machinability in Electrical Discharge Machining
T. Muthuramalingam et al.
MATERIALS AND MANUFACTURING PROCESSES (2013)
Application of response surface method on machining of Al-SiC nano-composites
S. Gopalakannan et al.
MEASUREMENT (2013)
Influence of dielectric fluids on surface properties of electrical discharge machined titanium alloy
Mohammed B. Ndaliman et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2013)
Neural network-based modeling to predict residual stresses during electric discharge machining of Al/SiC metal matrix composites
Sarabjeet Singh Sidhu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2013)
Optimization of micro milling electrical discharge machining of Inconel 718 by Grey-Taguchi method
Mao-yong Lin et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2013)
Optimization of electric discharge machining process using the response surface methodology and genetic algorithm approach
Chorng-Jyh Tzeng et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2013)
Optimization of machining characteristics in electric discharge machining of 6061Al/Al2O3p/20P composites by grey relational analysis
S. Singh
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Multi-objective optimization of electric-discharge machining process using controlled elitist NSGA-II
Pushpendra S. Bharti et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2012)
Investigation of the influence of EDM parameters on the overcut for AISI D3 tool steel
O. Belgassim et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2012)
Statistical analysis and optimization study on the machinability of beryllium-copper alloy in electro discharge machining
Yakup Yildiz et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2012)
Multi-objective parametric optimization of powder mixed electro-discharge machining using response surface methodology and non-dominated sorting genetic algorithm
Soumyakant Padhee et al.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2012)
Desirability function approach: A review and performance evaluation in adverse conditions
Nuno R. Costa et al.
CHEMOMETRICS AND INTELLIGENT LABORATORY SYSTEMS (2011)
Optimization of EDM process for multiple performance characteristics using Taguchi method and Grey relational analysis
Jong Hyuk Jung et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2010)
Sustainable manufacturing: Modeling and optimization challenges at the product, process and system levels
A. D. Jayal et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2010)
Study of the parameters in electrical discharge machining through response surface methodology approach
Sameh S. Habib
APPLIED MATHEMATICAL MODELLING (2009)
Comparisons of neural network models on surface roughness in electrical discharge machining
M. K. Pradhan et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2009)
Artificial neural network models for the prediction of surface roughness in electrical discharge machining
Angelos P. Markopoulos et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2008)
Influence of process parameters on electric discharge machining of WC/30%Co composites
D. Kanagarajan et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2008)
Modeling of electrical discharge machining process using back propagation neural network and multi-objective optimization using non-dominating sorting genetic algorithm-II
Debabrata Mandal et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Modeling and analysis of the rapidly resolidified layer of SG cast iron in the EDM process through the response surface methodology
Ko-Ta Chiang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Electric discharge machining of Al-SiC metal matrix composites using rotary tube electrode
B Mohan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of tungsten carbide
SH Lee et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Share Paper
