Related references
Note: Only part of the references are listed.Polyurethane insulation and household products - A systematic review of their impact on indoor environmental quality
Dzhordzhio Naldzhiev et al.
BUILDING AND ENVIRONMENT (2020)
Evaluation and analysis of volatile organic compounds and formaldehyde emission of building products in accordance with legal standards: A statistical experimental study
Seunghwan Wi et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
Development of a cornstarch adhesive for laminated veneer lumber bonding for use in engineered wood flooring
Xiong Xian-qing et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)
A one-dimensional VOC emission model of moisture-dominated cure adhesives
Junzhou He et al.
BUILDING AND ENVIRONMENT (2019)
Improvement of paint adhesion of environmentally friendly paint film on wood surface by plasma treatment
Peng Xiao-rui et al.
PROGRESS IN ORGANIC COATINGS (2019)
Properties and characteristics of novel formaldehyde-free wood adhesives prepared from Irvingia gabonensis and Irvingia wombolu seed kernel extracts
A. O. Alawode et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)
The combined effect of heat and moisture transfer dependent thermal conductivity of polystyrene insulation material: Impact on building energy performance
Maatouk Khoukhi
ENERGY AND BUILDINGS (2018)
Rank of green building material criteria based on the three pillars of sustainability using the hybrid multi criteria decision making method
Seyed Meysam Khoshnava et al.
JOURNAL OF CLEANER PRODUCTION (2018)
A cradle-to-gate based life cycle impact assessment comparing the KBFW EFB hybrid reinforced poly hydroxybutyrate biocomposite and common petroleum-based composites as building materials
Seyed Meysam Khoshnava et al.
ENVIRONMENTAL IMPACT ASSESSMENT REVIEW (2018)
Woven hybrid Biocomposite: Mechanical properties of woven kenaf bast fibre/oil palm empty fruit bunches hybrid reinforced poly hydroxybutyrate biocomposite as non-structural building materials
Seyed Meysam Khoshnava et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Formaldehyde and volatile organic compound (VOC) emissions from particleboard: Identification of odorous compounds and effects of heat treatment
Chuanjia Jiang et al.
BUILDING AND ENVIRONMENT (2017)
Fast sorption measurements of VOCs on building materials: Part 2-Comparison between FLEC and CLIMPAQ methods
Malak Rizk et al.
BUILDING AND ENVIRONMENT (2016)
Formaldehyde emission and VOCs from LVLs produced with three grades of urea-formaldehyde resin modified with nanocellulose
Nadir Ayrilmis et al.
BUILDING AND ENVIRONMENT (2016)
Exposure assessment of PM2.5 during winter in outdoor and indoor environments of research center: spatial-temporal distribution, carbonaceous compositions and contributions of infiltration
Peng Gao et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2016)
Indoor environment quality of green buildings: Case study of an LEED platinum certified factory in a warm humid tropical climate
Sachinthaka Ravindu et al.
BUILDING AND ENVIRONMENT (2015)
Comparison of conventional and green building materials in respect of VOC emissions and ozone impact on secondary carbonyl emissions
Yu-Hsiang Cheng et al.
BUILDING AND ENVIRONMENT (2015)
Indoor air quality requirements in green building certifications
Wenjuan Wei et al.
BUILDING AND ENVIRONMENT (2015)
Challenges in developing ventilation and indoor air quality standards: The story of ASHRAE Standard 62
Andrew Persily
BUILDING AND ENVIRONMENT (2015)
A study on the color change benefits of sustainable green building materials
Yuan-Hsiou Chang et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Green composites prepared from aliphatic polyesters and bast fibers
Zoi N. Terzopoulou et al.
INDUSTRIAL CROPS AND PRODUCTS (2015)
How green are celluose-reinforced composites?
Cordelia Sealy
MATERIALS TODAY (2015)
A review of life cycle assessment method for building industry
Ahmad Faiz Abd Rashid et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)
A review of standards and guidelines set by international bodies for the parameters of indoor air quality
Sabah Ahmed Abdul-Wahab et al.
ATMOSPHERIC POLLUTION RESEARCH (2015)
Understanding barriers affecting the selection of sustainable materials in building projects
Peter Oluwole Akadiri
JOURNAL OF BUILDING ENGINEERING (2015)
The convergence of life cycle assessment and nearly zero-energy buildings: The case of Germany
Markus Weissenberger et al.
ENERGY AND BUILDINGS (2014)
The using Fungi Treatment as Green and Environmentally process for Surface Modification of Natural Fibres
Seyed Meysam Khoshnava et al.
MECHANICAL AND MATERIALS ENGINEERING (2014)
The future of construction materials research and the seventh UN Millennium Development Goal: A few insights
F. Pacheco-Torgal et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Experimental investigation of new biocomposite with low cost for thermal insulation
Mourad Chikhi et al.
ENERGY AND BUILDINGS (2013)
A finish material management system for indoor air quality of apartment buildings (FinIAQ)
Sungho Lee et al.
ENERGY AND BUILDINGS (2012)
Formaldehyde emission monitoring from a variety of solid wood, plywood, blockboard and flooring products manufactured for building and furnishing materials
Martin Boehm et al.
JOURNAL OF HAZARDOUS MATERIALS (2012)
Biocomposites reinforced with natural fibers: 2000-2010
Omar Faruk et al.
PROGRESS IN POLYMER SCIENCE (2012)
Design of A Sustainable Building: A Conceptual Framework for Implementing Sustainability in the Building Sector
Peter O. Akadiri et al.
BUILDINGS (2012)
Cellulosic/synthetic fibre reinforced polymer hybrid composites: A review
M. Jawaid et al.
CARBOHYDRATE POLYMERS (2011)
A comparison of the mechanical characteristics of kenaf and lyocell fibre reinforced poly(lactic acid) (PLA) and poly(3-hydroxybutyrate) (PHB) composites
Nina Graupner et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Thermal performance analysis according to wood flooring structure for energy conservation in radiant floor heating systems
Jungki Seo et al.
ENERGY AND BUILDINGS (2011)
Kenaf fiber reinforced composites: A review
H. M. Akil et al.
MATERIALS & DESIGN (2011)
The changing role of life cycle phases, subsystems and materials in the LCA of low energy buildings
Gian Andrea Blengini et al.
ENERGY AND BUILDINGS (2010)
Flexural behaviour of pultruded jute/glass and kenaf/glass hybrid composites monitored using acoustic emission
Hazizan Md. Akil et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Endocrine disrupting chemicals in indoor and outdoor air
Ruthann A. Rudel et al.
ATMOSPHERIC ENVIRONMENT (2009)
Sustainability in the construction industry: A review of recent developments based on LCA
Oscar Ortiz et al.
CONSTRUCTION AND BUILDING MATERIALS (2009)
Sustainable facilities Institutional compliance and the Sino-Singapore Tianjin Eco-city Project
Sui Pheng Low et al.
FACILITIES (2009)
Biofibres and biocomposites
Maya Jacob John et al.
CARBOHYDRATE POLYMERS (2008)
The impact of emissions from structures on indoor air concentrations in newly finished buildings predicted and on-site measured levels
H. Jarnstrom et al.
INDOOR AND BUILT ENVIRONMENT (2008)
Tensile, flexural and interlaminar shear properties of woven jute and jute-glass fabric reinforced polyester composites
K. Sabeel Ahmed et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Indoor residential chemical emissions as risk factors for-respiratory and allergic effects in children: a review
M. J. Mendell
INDOOR AIR (2007)
Environmental performance evaluation of thermal insulation materials and its impact on the building
A. M. Papadopoulos et al.
BUILDING AND ENVIRONMENT (2007)
Vibrational spectroscopy at the service of industrial archaeology:: Nineteenth-century wallpaper
K. Castro et al.
TRAC-TRENDS IN ANALYTICAL CHEMISTRY (2007)
Could biopolymers reinforced by randomly scattered flax fibre be used in structural applications?
Edwin Bodros et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Evaluation of VOC emissions from building finishing materials using a small chamber and VOC analyser
Sumin Kim et al.
INDOOR AND BUILT ENVIRONMENT (2006)
A comparison of mechanical properties of natural fiber filled biodegradable and polyolefin polymers
I. Taha et al.
JOURNAL OF COMPOSITE MATERIALS (2006)
The effect of material choice on the total energy need and recycling potential of a building
C Thormark
BUILDING AND ENVIRONMENT (2006)
Assessment of the decrease of CO2 emissions in the construction field through the selection of materials:: Practical case study of three houses of low environmental impact
MJ González et al.
BUILDING AND ENVIRONMENT (2006)
The role of SETAC in the development of LCA
Walter Kloepffer
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2006)
Weighting in LCA based on ecotaxes - Development of a mid-point method and experiences from case studies
G Finnveden et al.
INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT (2006)
Biocomposites: technology, environmental credentials and market forces
Paul A. Fowler et al.
JOURNAL OF THE SCIENCE OF FOOD AND AGRICULTURE (2006)
Rheological, thermal, and morphological characteristics of plasticized cellulose acetate composite with natural fibers
JS Choi et al.
MACROMOLECULAR SYMPOSIA (2005)
Effect of process engineering on the performance of natural fiber reinforced cellulose acetate biocomposites
AK Mohanty et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2004)
Characterization of surface modified flax fibers and their biocomposites with PHB
SG Lee et al.
MACROMOLECULAR SYMPOSIA (2003)
Compounding and mechanical properties of biodegradable hemp fibre composites
A Keller
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Sustainable bio-composites from renewable resources: Opportunities and challenges in the green materials world
AK Mohanty et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2002)
The National Human Activity Pattern Survey (NHAPS): a resource for assessing exposure to environmental pollutants
NE Klepeis et al.
JOURNAL OF EXPOSURE ANALYSIS AND ENVIRONMENTAL EPIDEMIOLOGY (2001)
Surface modifications of natural fibers and performance of the resulting biocomposites: An overview
AK Mohanty et al.
COMPOSITE INTERFACES (2001)
Energy and mass flows of housing: a model and example
IM Johnstone
BUILDING AND ENVIRONMENT (2001)
Human health damages due to ionising radiation in life cycle impact assessment
R Frischknecht et al.
ENVIRONMENTAL IMPACT ASSESSMENT REVIEW (2000)
Surface modification of jute and its influence on performance of biodegradable jute-fabric/Biopol composites
AK Mohanty et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)