Related references
Note: Only part of the references are listed.Properties of steam-cured precast concrete containing iron tailing powder
Fanghui Han et al.
POWDER TECHNOLOGY (2019)
Effect of fire exposure on physico-mechanical and microstructural properties of concrete containing high volume slag cement
Eskinder Desta Shumuye et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Properties of early-age concrete relevant to cracking in massive concrete
Ippei Maruyama et al.
CEMENT AND CONCRETE RESEARCH (2019)
Optimization of concrete mix design to account for strength and hydration heat in massive concrete structures
Agathe Bourchy et al.
CEMENT & CONCRETE COMPOSITES (2019)
Advances in characterizing and understanding the microstructure of cementitious materials
Paulo J. M. Monteiro et al.
CEMENT AND CONCRETE RESEARCH (2019)
Effect of red mud (bauxite residue) as cement replacement on the properties of self-compacting concrete incorporating various fillers
Mansour Ghalehnovi et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Heat of hydration and mechanical properties of mass concrete with high-volume GGBFS replacements
Hong-Min Woo et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2018)
Influence of high-volume electric furnace nickel slag and phosphorous slag on the properties of massive concrete
Qiang Wang et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2018)
Hydration, mechanical properties and durability of high-strength concrete under different curing conditions
Fanghui Han et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2018)
Utilization of flue gas desulfurization gypsum as an activation agent for high-volume slag concrete
Linhua Jiang et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Effect of filler type and content on mechanical properties and microstructure of sand concrete made with superfine waste sand
Chaohua Jiang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of water-to-binder ratio on the hydration kinetics of composite binder containing slag or fly ash
Fanghui Han et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2017)
Early-age hydration characteristics of composite binder containing iron tailing powder
Fanghui Han et al.
POWDER TECHNOLOGY (2017)
Influence of limestone on the hydration of ternary slag cements
Samuel Adu-Amankwah et al.
CEMENT AND CONCRETE RESEARCH (2017)
Use of grounded iron ore tailings (GIOTs) and BaCO3 to improve sulfate resistance of pastes
Chuansheng Xiong et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Early hydration of SCM-blended Portland cements: A pore solution and isothermal calorimetry study
Axel Schoeler et al.
CEMENT AND CONCRETE RESEARCH (2017)
Early hydration properties of composite binder containing limestone powder with different finenesses
Han Fanghui et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2016)
Contributions of fly ash and ground granulated blast-furnace slag to the early hydration heat of composite binder at different curing temperatures
Wang Qiang et al.
ADVANCES IN CEMENT RESEARCH (2016)
Fresh properties, compressive strength and microstructure of fly ash geopolymer paste blended with iron ore tailing under thermal cycle
Ping Duan et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Test research on the effects of mechanochemically activated iron tailings on the compressive strength of concrete
Cheng Yunhong et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Impacts of various factors on the rehydration of cement-based materials with a low water-binder ratio using mathematical models
Yue Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Comparative study of reaction degree of mineral admixture by selective dissolution and image analysis
Fanghui Han et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Effect of w/c and temperature on the early-stage hydration heat development in Portland-limestone cement
Vratislav Tydlitat et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Understanding the Filler Effect on the Nucleation and Growth of C-S-H
E. Berodier et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)
A comparison of early hydration properties of cement-steel slag binder and cement-limestone powder binder
Peiyu Yan et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2014)
Effect of temperature on the microstructure of calcium silicate hydrate (C-S-H)
E. Gallucci et al.
CEMENT AND CONCRETE RESEARCH (2013)
Hydration of slag-blended cements
B. Kolani et al.
CEMENT & CONCRETE COMPOSITES (2012)
Methods for determination of degree of reaction of slag in blended cement pastes
Vanessa Kocaba et al.
CEMENT AND CONCRETE RESEARCH (2012)
Role of the filler on Portland cement hydration at early ages
V. Rahhal et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Hydration heat development in blended cements containing fine-ground ceramics
Vratislav Tydlitat et al.
THERMOCHIMICA ACTA (2012)
Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash
K. De Weerdt et al.
CEMENT AND CONCRETE RESEARCH (2011)
Supplementary cementitious materials
Barbara Lothenbach et al.
CEMENT AND CONCRETE RESEARCH (2011)
Composition and microstructure of 20-year-old ordinary Portland cement-ground granulated blast-furnace slag blends containing 0 to 100% slag
R. Taylor et al.
CEMENT AND CONCRETE RESEARCH (2010)
Innovative methodology for comprehensive utilization of iron ore tailings Part 2: The residues after iron recovery from iron ore tailings to prepare cementitious material
Chao Li et al.
JOURNAL OF HAZARDOUS MATERIALS (2010)
Share Paper
