Related references
Note: Only part of the references are listed.Study on Mechanical and Thermal Properties of Poly(Lactic acid)/Poly(Butylene adipate-co-terephthalate)/Office Wastepaper Fiber Biodegradable Composites
Chong Xu et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2019)
Preparation and Rheological and Mechanical Properties of Poly(butylene succinate)/Talc Composites for Material Extrusion Additive Manufacturing
Yunhong Zhou et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2019)
Experimental Design of Sustainable 3D-Printed Poly(Lactic Acid)/Biobased Poly(Butylene Succinate) Blends via Fused Deposition Modeling
Mawath Qahtani et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)
Strategy To Improve Printability of Renewable Resource-Based Engineering Plastic Tailored for FDM Applications
Elizabeth Diederichs et al.
ACS OMEGA (2019)
Bio-based composite fibers from pine essential oil and PLA/PBAT polymer blend. Morphological, physicochemical, thermal and mechanical characterization
Monica Hernandez-Lopez et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
Novel biorenewable composite of wood polysaccharide and polylactic acid for three dimensional printing
Wenyang Xu et al.
CARBOHYDRATE POLYMERS (2018)
Optimising Ductility of Poly(Lactic Acid)/Poly(Butylene Adipate-co-Terephthalate) Blends Through Co-continuous Phase Morphology
Yixin Deng et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)
PLA-PEG-PLA tri-block copolymers: Effective compatibilizers for promotion of the interfacial structure and mechanical properties of PLA/PBAT blends
Yue Ding et al.
POLYMER (2018)
Polylactide (PLA) Filaments a Biobased Solution for Additive Manufacturing: Correlating Rheology and Thermomechanical Properties with Printing Quality
Gianluca Cicala et al.
MATERIALS (2018)
Interlayer adhesion and fracture resistance of polymers printed through melt extrusion additive manufacturing process
Nahal Aliheidari et al.
MATERIALS & DESIGN (2018)
Extrusion 3D Printing of Polybutyrate-Adipate-Terephthalate-Polymer Composites in the Pellet Form
Sarat Singamneni et al.
POLYMERS (2018)
3D Printing of PLA/clay Nanocomposites: Influence of Printing Temperature on Printed Samples Properties
Bartolomeo Coppola et al.
MATERIALS (2018)
Effect of Polyethylene glycol on Mechanical, Thermal, and Morphological Properties of Talc Reinforced Polylactic Acid Composites
Savitha Saravana et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Preparation and Characterization of Poly(butylene succinate)/Polylactide Blends for Fused Deposition Modeling 3D Printing
Qing Ou-Yang et al.
ACS OMEGA (2018)
Improving the Impact Strength and Heat Resistance of 3D Printed Models: Structure, Property, and Processing Correlationships during Fused Deposition Modeling (FDM) of Poly(Lactic Acid)
Claire Benwood et al.
ACS OMEGA (2018)
Biodegradable Composites Developed from PBAT/PLA Binary Blends and Silk Powder: Compatibilization and Performance Evaluation
Daichi Nakayama et al.
ACS OMEGA (2018)
Effect of montmorillonite and chain extender on rheological, morphological and biodegradation behavior of PLA/PBAT blends
Ana Lucia Perrone de L. Freitas et al.
POLYMER TESTING (2017)
Impact of the Fused Deposition (FDM) Printing Process on Polylactic Acid (PLA) Chemistry and Structure
Michael Arthur Cuiffo et al.
APPLIED SCIENCES-BASEL (2017)
Welding of 3D-printed carbon nanotube-polymer composites by locally induced microwave heating
Charles B. Sweeney et al.
SCIENCE ADVANCES (2017)
Effects of Poly(butyleneadipate-co-terephthalate) as a Macromolecular Nucleating Agent on the Crystallization and Foaming Behavior of Biodegradable Poly(lactic acid)
Wei Liu et al.
CELLULAR POLYMERS (2017)
A review on composite materials and process parameters optimisation for the fused deposition modelling process
N. Mohan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Polymers for 3D Printing and Customized Additive Manufacturing
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2017)
PLA/PBAT Bionanocomposites with Antimicrobial Natural Rosin for Green Packaging
Hesham Moustafa et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
PLA composites: From production to properties
Marius Murariu et al.
ADVANCED DRUG DELIVERY REVIEWS (2016)
Method of formulating geopolymer for 3D printing for construction applications
Ming Xia et al.
MATERIALS & DESIGN (2016)
Analysis of equations of state for polymers
Erli Jose Padilha Junior et al.
POLIMEROS-CIENCIA E TECNOLOGIA (2015)
Influence of chain extender on mechanical, thermal and morphological properties of blown films of PLA/PBAT blends
Liliane Cardoso Arruda et al.
POLYMER TESTING (2015)
Biopolymer Blends Based on Poly (lactic acid): Shear and Elongation Rheology/Structure/Blowing Process Relationships
Racha Al-Itry et al.
POLYMERS (2015)
Talc as a Nucleating Agent and Reinforcing Filler in Poly(lactic acid) Composites
A. Shakoor et al.
POLYMER ENGINEERING AND SCIENCE (2014)
Crystallization and thermomechanical properties of PLA composites: Effects of additive types and heat treatment
J. Wootthikanokkhan et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Modification of a Theoretical Model for the Prediction of the Thermal Expansion Behavior of Particulate Composites: Application to Poly(vinyl chloride)/Talc Composites
Guangshun Chen et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2013)
Thermal conductivity, coefficient of linear thermal expansion and mechanical properties of LDPE/Ni composites
D. Tripathi et al.
INDIAN JOURNAL OF PHYSICS (2013)
Crystallization and Melting Behavior of Biodegradable Poly(L-lactic acid)/Talc Composites
Yan-Hua Cai
E-JOURNAL OF CHEMISTRY (2012)
Effects of talc on the mechanical and thermal properties of polylactide
Fengmei Yu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Thermal, Mechanical and Rheological Behavior of Poly(lactic acid)/Talc Composites
Shikha Jain et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2012)
Isothermal Cold-Crystallization of PLA/PBAT Blends With and Without the Addition of Acetyl Tributyl Citrate
Enic Quero et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2012)
Crystallization kinetics of poly(lactic acid)-talc composites
D. Battegazzore et al.
EXPRESS POLYMER LETTERS (2011)
Crystallization Behavior of Fully Biodegradable Poly(Lactic Acid)/Poly(Butylene Adipate-co-Terephthalate) Blends
Hanwen Xiao et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Melt rheology of polylactide/poly(butylene adipate-co-terephthalate) blends
Shu-Ying Gu et al.
CARBOHYDRATE POLYMERS (2008)
Study of biodegradable polyactide/poly(butylene adipate-co-terephthalate) blends
L Jiang et al.
BIOMACROMOLECULES (2006)
Share Paper
