Related references
Note: Only part of the references are listed.Microstructure and wear behavior of AA6061/SiC surface composite fabricated via friction stir processing with different pins and passes
Hamidreza Eftekharinia et al.
RARE METALS (2020)
Dissimilar modified friction stir clinching of AA2024-AA6061 aluminum alloys: Effects of materials positioning
M. Paidar et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Enhancing the mechanical and tribological properties of Mg2Si-rich aluminum alloys by multi-pass friction stir processing
Ali Moharrami et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
Influence of multi-pass FSP on the microstructure, mechanical properties and tribological characterization of Al/B4C composite fabricated by accumulative roll bonding (ARB)
Moslem Paidar et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Microstructural characterization and tensile behavior of friction stir processed AA6061/Al2Cu cast aluminum matrix composites
I. Dinaharan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
The study of thermomechanical and microstructural issues in dissimilar FSW of AA6061 wrought and A390 cast alloys
Mahmoud Eskandari et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Modified friction stir clinching with protuberance-keyhole levelling: A process for production of welds with high strength
Moslem Paidar et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Effect of SiC nanoparticles on the microstructure and texture of friction stir welded AA2024/AA6061
Mohammad Mahdi Moradi et al.
MATERIALS CHARACTERIZATION (2019)
Effect of stacking fault energy on the restoration mechanisms and mechanical properties of friction stir welded copper alloys
Akbar Heidarzadeh et al.
MATERIALS & DESIGN (2019)
Orbital friction stir lap welding of AA5456-H321/AA5456-O aluminum alloys under varied parameters
V. Ebrahimzadeh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Effects of pin thread on the in-process material flow behavior during friction stir welding: A computational fluid dynamics study
Gaoqiang Chen et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)
Simulation of strain rate, material flow, and nugget shape during dissimilar friction stir welding of AA6061 aluminum alloy and Al-Mg2Si composite
E. Sharghi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Mechanical Properties and Wear Behavior of AA5182/WC Nanocomposite Fabricated by Friction Stir Welding at Different Tool Traverse Speeds
Moslem Paidar et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Friction Stir Welding of Al-B4C Composite Fabricated by Accumulative Roll Bonding: Evaluation of Microstructure and Mechanical Behavior
Alireza Moradi Faradonbeh et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Mechanical and wear properties of friction stir welded dissimilar AA6101-T6 and AA1350 alloys: Effect of offset distance and number of passes
R. Ashok Kumar et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2018)
Mechanical properties of a hot deformed Al-Mg2Si in-situ composite
Rashadoddin Zamani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructure and texture evolution of friction stir welded dissimilar aluminum alloys: AA2024 and AA6061
Mohammad Mandi Moradi et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Effect of pin tool flute radius on the material flow and tensile properties of dissimilar friction stir welded aluminum alloys
Mohammed M. Hasan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Role of SiC ceramic particles on the physical and mechanical properties of Al-4%Cu metal matrix composite fabricated via mechanical alloying
Mahnaz Keneshloo et al.
JOURNAL OF COMPOSITE MATERIALS (2017)
Effect of textural variation and twinning activity on fracture behavior of friction stir welded AZ31 Mg alloy in bending tests
Dejia Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
The Analysis of Strontium Modification on Microstructure and Mechanical Properties of Al-25%Mg2Si In Situ Composite
Dongtao Wang et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Microstructure and mechanical properties of friction stir welds on unmodified and P-modified Al-Mg2Si-Si alloys
Q. D. Qin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Friction Stir Welding in Wrought and Cast Aluminum Alloys: Weld Quality Evaluation and Effects of Processing Parameters on Microstructure and Mechanical Properties
Yi Pan et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Correlating the microstructure to mechanical properties and wear behavior of an accumulative back extruded Al-Mg2Si in-situ composite
M. Ebrahimi et al.
TRIBOLOGY INTERNATIONAL (2017)
In-situ grain structure and texture evolution during friction stir welding of austenite stainless steel
F. C. Liu et al.
MATERIALS & DESIGN (2017)
Role of Threaded Tool Pin Profile and Rotational Speed on Generation of Defect Free Friction Stir AA 2014 Aluminium Alloy Welds
Suresh D. Meshram et al.
DEFENCE SCIENCE JOURNAL (2016)
Friction stir spot welding of 2024-T3 aluminum alloy with SiC nanoparticles
Moslem Paidar et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2016)
Microstructure and corrosion behavior of Al-10%Mg2Si cast alloy after heat treatment
Chong Li et al.
MATERIALS CHARACTERIZATION (2016)
Understanding the role of welding parameters and tool profile on the morphology and properties of expelled flash of spot welds
Ojo Olatunji Oladimeji et al.
MATERIALS & DESIGN (2016)
Friction-Stir Welding and Processing
Yuri Hovanski et al.
JOM (2015)
Corrosion behavior of Al-Mg2Si alloys with/without addition of Al-P master alloy
Zedi Li et al.
MATERIALS CHARACTERIZATION (2015)
The Mg2Si phase evolution during thermomechanical processing of in-situ aluminum matrix macro-composite
A. H. Shafieizad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effects of Mg content on primary Mg2Si phase in hypereutectic Al-Si alloys
Zhi-li Huang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
EBSD study on microstructure and texture of friction stir welded AA5052-O and AA6061-T6 dissimilar joint
Bin Wang et al.
MATERIALS & DESIGN (2015)
Friction Stir Welding of Dissimilar A319 and A413 Cast Aluminum Alloys
A. Karam et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2014)
The Effect of Copper Addition on the Fluidity and Viscosity of an Al-Mg-Si Alloy
A. Heidarzadeh et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Effect of hot extrusion on wear properties of Al-15 wt.% Mg2Si in situ metal matrix composites
N. Soltani et al.
MATERIALS & DESIGN (2014)
On the role of pin geometry in microstructure and mechanical properties of AA7075/SiC nano-composite fabricated by friction stir welding technique
Mohsen Bahrami et al.
MATERIALS & DESIGN (2014)
A review of numerical analysis of friction stir welding
Xiaocong He et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Effect of tool pin profile on microstructure and mechanical properties of friction stir welded pure copper joints
H. Khodaverdizadeh et al.
MATERIALS & DESIGN (2013)
The effect of Cu addition and solution heat treatment on the microstructure, hardness and tensile properties of Al-15%Mg2Si-0.15%Li composite
M. Emamy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Effect of copper addition on wear and corrosion behaviours of Mg2Si particle reinforced composites
A. Palta et al.
MATERIALS & DESIGN (2012)
Tensile behavior of friction stir welded AA 6061-T4 aluminum alloy joints
A. Heidarzadeh et al.
MATERIALS & DESIGN (2012)
The influence of Li on the tensile properties of extruded in situ Al-15%Mg2Si composite
A. Razaghian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Microstructure evolution and mechanical properties of dissimilar friction stir welded joints between AA1100-B4C MMC and AA6063 alloy
J. Guo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Microstructures of dissimilar friction stir welded joints between 2024-T4 aluminum alloy and Al/Mg2Si metal matrix cast composite
M. Sharifitabar et al.
COMPOSITES PART B-ENGINEERING (2011)
Transient liquid phase diffusion bonding of Al/Mg2Si metal matrix composite
H. Nami et al.
MATERIALS & DESIGN (2011)
Microstructure and mechanical properties of friction stir welded Al/Mg2Si metal matrix cast composite
H. Nami et al.
MATERIALS & DESIGN (2011)
Corrosion mechanism associated with Mg2Si and Si particles in Al-Mg-Si alloys
Zeng Feng-li et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)
Microstructure and mechanical properties of diffusion bonded Al/Mg2Si metal matrix in situ composite
H. Nami et al.
MATERIALS & DESIGN (2010)
The influence of Cu rich intermetallic phases on the microstructure, hardness and tensile properties of Al-15% Mg2Si composite
M. Emamy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Friction stir welding of dissimilar A319 and A356 aluminium cast alloys
A. S. Hassan et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Friction stir welding and processing
RS Mishra et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
Share Paper
