Related references
Note: Only part of the references are listed.Individualized 3D-printed templates for high-dose-rate interstitial multicathether brachytherapy in patients with breast cancer
Cynthia Aristei et al.
BRACHYTHERAPY (2019)
Development and dosimetric assessment of a patient-specific elastic skin applicator for high-dose-rate brachytherapy
So-Yeon Park et al.
BRACHYTHERAPY (2019)
Individual 3-dimensional printed mold for treating hard palate carcinoma with brachytherapy: A clinical report
Valentina Lancellotta et al.
JOURNAL OF PROSTHETIC DENTISTRY (2019)
Development of a Novel, Low-Cost, High-fidelity Cleft Lip Repair Surgical Simulator Using Computer-Aided Design and 3-Dimensional Printing
Chelsea L. Reighard et al.
JAMA FACIAL PLASTIC SURGERY (2019)
Simulation as More Than a Treatment-Planning Tool: A Systematic Review of the Literature on Radiation Oncology Simulation-Based Medical Education
Michael K. Rooney et al.
INTERNATIONAL JOURNAL OF RADIATION ONCOLOGY BIOLOGY PHYSICS (2018)
A framework for clinical commissioning of 3D-printed patient support or immobilization devices in photon radiotherapy
Tyler Meyer et al.
JOURNAL OF APPLIED CLINICAL MEDICAL PHYSICS (2018)
The impact of using three-dimensional printed liver models for patient education
Tianyou Yang et al.
JOURNAL OF INTERNATIONAL MEDICAL RESEARCH (2018)
Three-dimensionally Printed Facial Mask to Aid the Treatment of Contracted Socket After Radiation Damage in Retinoblastoma
Maayke M. P. Kuijten et al.
OPHTHALMIC PLASTIC AND RECONSTRUCTIVE SURGERY (2018)
MR-CBCT image-guided system for radiotherapy of orthotopic rat prostate tumors
Tsuicheng D. Chiu et al.
PLOS ONE (2018)
Side effects of CT-guided implantation of 125I seeds for recurrent malignant tumors of the head and neck assisted by 3D printing non co-planar template
Yuliang Jiang et al.
RADIATION ONCOLOGY (2018)
3D-Printed masks as a new approach for immobilization in radiotherapy – a study of positioning accuracy
Matthias Felix Haefner et al.
Oncotarget (2018)
Patient-Specific Actual-Size Three-Dimensional Printed Models for Patient Education in Glioma Treatment: First Experiences
Tom H. van de Belt et al.
WORLD NEUROSURGERY (2018)
Patient-Specific Surgical Implants Made of 3D Printed PEEK: Material, Technology, and Scope of Surgical Application
Philipp Honigmann et al.
BIOMED RESEARCH INTERNATIONAL (2018)
3D printing for preoperative planning and surgical training: a review
Anurup Ganguli et al.
BIOMEDICAL MICRODEVICES (2018)
Workload implications for clinic workflow with implementation of three-dimensional printed customized bolus for radiation therapy: A pilot study
Eric Ehler et al.
PLOS ONE (2018)
Use of 5-alpha-reductase inhibitors as alternatives to luteinizing-hormone releasing hormone (LHRH) analogs or anti-androgens for prostate downsizing before brachytherapy
Tsuicheng Chiu et al.
PRACTICAL RADIATION ONCOLOGY (2018)
Low-cost optical scanner and 3-dimensional printing technology to create lead shielding for radiation therapy of facial skin cancer: First clinical case series
Ankur Sharma et al.
ADVANCES IN RADIATION ONCOLOGY (2018)
Three-dimensional printing in surgical planning: A case of aortopulmonary window with interrupted aortic arch
Ryan A. Moore et al.
ANNALS OF PEDIATRIC CARDIOLOGY (2018)
3D printing materials and their use in medical education: a review of current technology and trends for the future
Justine Garcia et al.
BMJ SIMULATION & TECHNOLOGY ENHANCED LEARNING (2018)
Inversely designed, 3D-printed personalized template-guided interstitial brachytherapy for vaginal tumors
Shuhei Sekii et al.
JOURNAL OF CONTEMPORARY BRACHYTHERAPY (2018)
Intrapatient study comparing 3D printed bolus versus standard vinyl gel sheet bolus for postmastectomy chest wall, radiation therapy
James L. Robar et al.
PRACTICAL RADIATION ONCOLOGY (2018)
3D-Printing Technologies for Craniofacial Rehabilitation, Reconstruction, and Regeneration
Ethan L. Nyberg et al.
ANNALS OF BIOMEDICAL ENGINEERING (2017)
Clinical application of 3D-printed-step-bolus in post-total-mastectomy electron conformal therapy
Kwangwoo Park et al.
ONCOTARGET (2017)
Clinical applications of 3-dimensional printing in radiation therapy
Yizhou Zhao et al.
MEDICAL DOSIMETRY (2017)
Dosimetric characterization of 3D printed bolus at different infill percentage for external photon beam radiotherapy
Rosalinda Ricotti et al.
PHYSICA MEDICA-EUROPEAN JOURNAL OF MEDICAL PHYSICS (2017)
Dosimetry Verification of 125I Seeds Implantation With Three-Dimensional Printing Noncoplanar Templates and CT Guidance for Paravertebral/Retroperitoneal Malignant Tumors
Zhe Ji et al.
TECHNOLOGY IN CANCER RESEARCH & TREATMENT (2017)
Therapeutic value of 3-D printing template-assisted 125I-seed implantation in the treatment of malignant liver tumors
Tao Han et al.
ONCOTARGETS AND THERAPY (2017)
Clinical efficacy and effectiveness of 3D printing: a systematic review
Laura E. Diment et al.
BMJ OPEN (2017)
Individualized 3D scanning and printing for non-melanoma skin cancer brachytherapy: a financial study for its integration into clinical workflow
Meritxell Arenas et al.
JOURNAL OF CONTEMPORARY BRACHYTHERAPY (2017)
Implementing a 3D printing service in a biomedical library
Verma Walker
JOURNAL OF THE MEDICAL LIBRARY ASSOCIATION (2017)
I125 brachytherapy guided by individual three-dimensional printed plates for recurrent ameloblastoma of the skull base
J. Y. Liu et al.
BRITISH JOURNAL OF ORAL & MAXILLOFACIAL SURGERY (2017)
Dosimetry verification of radioactive seed implantation for malignant tumors assisted by 3D printing individual templates and CT guidance
Zhe Ji et al.
APPLIED RADIATION AND ISOTOPES (2017)
Utilization of a 3D printer to fabricate boluses used for electron therapy of skin lesions of the eye canthi
Magdalena Lukowiak et al.
JOURNAL OF APPLIED CLINICAL MEDICAL PHYSICS (2017)
With the advent of domestic 3-dimensional (3D) printers and their associated reduced cost, is it now time for every medical school to have their own 3D printer?
Christopher Balestrini et al.
MEDICAL TEACHER (2016)
Personalized 3D printed model of kidney and tumor anatomy: a useful tool for patient education
Jean-Christophe Bernhard et al.
WORLD JOURNAL OF UROLOGY (2016)
Three-dimensional customized bolus for intensity-modulated radiotherapy in a patient with Kimura's disease involving the auricle
J. W. Park et al.
CANCER RADIOTHERAPIE (2016)
Three-dimensional printing of a complex CHD to plan surgical repair
Khaled Hadeed et al.
CARDIOLOGY IN THE YOUNG (2016)
Dosimetry study of three-dimensional print template-guided precision 125I seed implantation
Zhang Hongtao et al.
JOURNAL OF CANCER RESEARCH AND THERAPEUTICS (2016)
Accuracy evaluation of a 3D-printed individual template for needle guidance in head and neck brachytherapy
Ming-Wei Huang et al.
JOURNAL OF RADIATION RESEARCH (2016)
Application of systems and control theory-based hazard analysis to radiation oncology
Todd Pawlicki et al.
MEDICAL PHYSICS (2016)
Clinical implementation of 3D printing in the construction of patient specific bolus for electron beam radiotherapy for non-melanoma skin cancer
Richard A. Canters et al.
RADIOTHERAPY AND ONCOLOGY (2016)
Individualised 3D printed vaginal template for MRI guided brachytherapy in locally advanced cervical cancer
Jacob Christian Lindegaard et al.
RADIOTHERAPY AND ONCOLOGY (2016)
Morphological analysis and preoperative simulation of a double-chambered right ventricle using 3-dimensional printing technology
Takashi Shirakawa et al.
INTERACTIVE CARDIOVASCULAR AND THORACIC SURGERY (2016)
Clinical applications of custom-made vaginal cylinders constructed using three-dimensional printing technology
Rajni Sethi et al.
JOURNAL OF CONTEMPORARY BRACHYTHERAPY (2016)
A Patient-Specific Polylactic Acid Bolus Made by a 3D Printer for Breast Cancer Radiation Therapy
So-Yeon Park et al.
PLOS ONE (2016)
3D printed facial laser scans for the production of localised radiotherapy treatment masks - A case study
Matthew Briggs et al.
JOURNAL OF VISUAL COMMUNICATION IN MEDICINE (2016)
Regulatory Considerations in the Design and Manufacturing of Implantable 3D-Printed Medical Devices
Robert J. Morrison et al.
CTS-CLINICAL AND TRANSLATIONAL SCIENCE (2015)
A training phantom for ultrasound-guided needle insertion and suturing
Khashayar Nattagh et al.
BRACHYTHERAPY (2014)
Patient specific 3D printed phantom for IMRT quality assurance
Eric D. Ehler et al.
PHYSICS IN MEDICINE AND BIOLOGY (2014)
3D printing based on imaging data: review of medical applications
F. Rengier et al.
INTERNATIONAL JOURNAL OF COMPUTER ASSISTED RADIOLOGY AND SURGERY (2010)
EVALUATION OF SAFETY IN A RADIATION ONCOLOGY SETTING USING FAILURE MODE AND EFFECTS ANALYSIS
Eric C. Ford et al.
INTERNATIONAL JOURNAL OF RADIATION ONCOLOGY BIOLOGY PHYSICS (2009)
Preferred Reporting Items for Systematic Reviews and Meta-Analyses: The PRISMA Statement
David Moher et al.
PLOS MEDICINE (2009)
Utilization of the PICO framework to improve searching PubMed for clinical questions
Connie Schardt et al.
BMC MEDICAL INFORMATICS AND DECISION MAKING (2007)