Related references
Note: Only part of the references are listed.Investigating the effective parameters on the risk levels of rockburst phenomena by developing a hybrid heuristic algorithm
Jian Zhou et al.
ENGINEERING WITH COMPUTERS (2021)
Development of a new methodology for estimating the amount of PPV in surface mines based on prediction and probabilistic models (GEP-MC)
Jian Zhou et al.
INTERNATIONAL JOURNAL OF MINING RECLAMATION AND ENVIRONMENT (2021)
The effects of ABC, ICA, and PSO optimization techniques on prediction of ripping production
Edy Tonnizam Mohamad et al.
ENGINEERING WITH COMPUTERS (2020)
Use of Intelligent Methods to Design Effective Pattern Parameters of Mine Blasting to Minimize Flyrock Distance
Jian Zhou et al.
NATURAL RESOURCES RESEARCH (2020)
Forecasting of TBM advance rate in hard rock condition based on artificial neural network and genetic programming techniques
Jian Zhou et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2020)
Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes
Maryam Safa et al.
PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2020)
The evaluation of potential for the exploration and development of coalbed methane resources based on an improved uncertainty measure optimization model
Jie Fang et al.
ENERGY EXPLORATION & EXPLOITATION (2019)
Feasibility of Stochastic Gradient Boosting Approach for Evaluating Seismic Liquefaction Potential Based on SPT and CPT Case Histories
Jian Zhou et al.
JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES (2019)
UML diagrams for dynamical monitoring of rail vehicles
Milos Milovancevic et al.
PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS (2019)
Slope stability prediction for circular mode failure using gradient boosting machine approach based on an updated database of case histories
Jian Zhou et al.
SAFETY SCIENCE (2019)
Geological Structural Surface Evaluation Model Based on Unascertained Measure
Kang Zhao et al.
GEOFLUIDS (2019)
Application of a Hybrid Artificial Neural Network-Particle Swarm Optimization (ANN-PSO) Model in Behavior Prediction of Channel Shear Connectors Embedded in Normal and High-Strength Concrete
Mahdi Shariati et al.
APPLIED SCIENCES-BASEL (2019)
Significance of Surface Eco-Protection Techniques for Cohesive Soils Slope in Selangor, Malaysia
Meldi Suhatril et al.
GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2019)
Effects of microfabric on drillability of rocks
S. H. Hoseinie et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2019)
Subgrade Stability Evaluation in Permafrost Regions Based on Unascertained Measurement Model
Changfu Huang et al.
GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2019)
Uniaxial compressive strength prediction through a new technique based on gene expression programming
Danial Jahed Armaghani et al.
NEURAL COMPUTING & APPLICATIONS (2018)
Experimental Investigation of the Influence of Confining Stress on Hard Rock Fragmentation Using a Conical Pick
Xibing Li et al.
ROCK MECHANICS AND ROCK ENGINEERING (2018)
Multi-planar detection optimization algorithm for the interval charging structure of large-diameter longhole blasting design based on rock fragmentation aspects
Mingzheng Wang et al.
ENGINEERING OPTIMIZATION (2018)
Evaluation method of rockburst: State-of-the-art literature review
Jian Zhou et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2018)
Assessment of the Excavatability of Rock Based on Rock Mass Quality: A Case Study from India
A. K. Naithani et al.
GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2018)
Rippability Assessment of Weathered Sedimentary Rock Mass using Seismic Refraction Methods
M. A. M. Ismail et al.
INTERNATIONAL SEMINAR ON MATHEMATICS AND PHYSICS IN SCIENCES AND TECHNOLOGY 2017 (ISMAP 2017) (2018)
Prediction of cuttability from rock cutting resistance
V Raghavan et al.
JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY (2018)
An excavatability classification system for surface excavation in sedimentary rocks
Maybelle Liang et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2017)
An optimized ANN model based on genetic algorithm for predicting ripping production
Edy Tonnizam Mohamad et al.
NEURAL COMPUTING & APPLICATIONS (2017)
A Novel Mobile Testing Equipment for Rock Cuttability Assessment: Vertical Rock Cutting Rig (VRCR)
Serdar Yasar et al.
ROCK MECHANICS AND ROCK ENGINEERING (2017)
An Online Modeling Method for Formation Drillability Based on OS-Nadaboost-ELM Algorithm in Deep Drilling Process
Chao Gan et al.
IFAC PAPERSONLINE (2017)
Ripping Production Prediction in Different Weathering Zones According to Field Data
Edy Tonnizam Mohamad et al.
GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2017)
Prediction of the strength and elasticity modulus of granite through an expert artificial neural network
Danial Jahed Armaghani et al.
ARABIAN JOURNAL OF GEOSCIENCES (2016)
Cuttability Assessment of Selected Rocks Through Different Brittleness Values
Arif Emre Dursun et al.
ROCK MECHANICS AND ROCK ENGINEERING (2016)
Rock Drillability Assessment and Lithology Classification Based on the Operating Parameters of a Drifter: Case Study in a Coal Mine in China
Kai Zhang et al.
ROCK MECHANICS AND ROCK ENGINEERING (2016)
Prediction of the uniaxial compressive strength of sandstone using various modeling techniques
Danial Jahed Armaghani et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2016)
Classification of Rockburst in Underground Projects: Comparison of Ten Supervised Learning Methods
Jian Zhou et al.
JOURNAL OF COMPUTING IN CIVIL ENGINEERING (2016)
Continuous Rating for Diggability Assessment in Surface Mines
Melih Iphar
WORLD MULTIDISCIPLINARY EARTH SCIENCES SYMPOSIUM (WMESS 2016), PTS 1-4 (2016)
Prediction of Drillability of Rocks with Strength Properties Using a Hybrid GA-ANN Technique
Manoj Khandelwal et al.
GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2016)
Cuttability assessment using the Drilling Rate Index (DRI)
Serdar Yasar et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2015)
Rock cuttability assessment using the concept of hybrid dynamic hardness (HDH)
N. Gunes Yilmaz et al.
BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2015)
Blastability evaluation for rock mass fragmentation in Iran central iron ore mines
Akbari Majid et al.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2015)
Study and Application on Stability Classification of Tunnel Surrounding Rock Based on Uncertainty Measure Theory
Hujun He et al.
MATHEMATICAL PROBLEMS IN ENGINEERING (2014)
Applications of NTNU/SINTEF Drillability Indices in Hard Rock Tunneling
S. Zare et al.
ROCK MECHANICS AND ROCK ENGINEERING (2013)
Development of a New Index to Assess the Rock Mass Drillability
Omid Saeidi et al.
GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2013)
Comparison of Some Rock Hardness Scales Applied in Drillability Studies
S. H. Hoseinie et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2012)
Long-term prediction model of rockburst in underground openings using heuristic algorithms and support vector machines
Zhou Jian et al.
SAFETY SCIENCE (2012)
Classifications of properties influencing the drillability of rocks, based on the NTNU/SINTEF test method
Filip Dahl et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2012)
Investigation into the effects of different rocks on rock cuttability by a V-type disc cutter
C. Balci et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2012)
Integrating unascertained measurement and information entropy theory to assess blastability of rock mass
Zhou Jian et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY (2012)
A New Blastability Index for Hard Roof Management in Blasting Gallery Method
Chhangte Sawmliana et al.
GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2012)
Review of Cuttability Indices and A New Rockmass Classification Approach for Selection of Surface Miners
Kaushik Dey et al.
ROCK MECHANICS AND ROCK ENGINEERING (2011)
The drillability assessment of rocks using the different brittleness values
Olgay Yarali et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2011)
Optimization model of unascertained measurement for underground mining method selection and its application
Liu Ai-hua et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY (2010)
Development of a new classification system for assessing of rock mass drillability index (RDi)
S. H. Hoseinie et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2008)
Application of artificial neural networks for predicting the cuttability of rocks by drag tools
Bulent Tiryaki
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2008)
An application of fuzzy sets to the Diggability Index Rating Method for surface mine equipment selection
M Iphar et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2006)
A rippability classification system for marls in lignite mines
H Basarir et al.
ENGINEERING GEOLOGY (2004)