4.7 Article

Reactive Catalytic Fast Pyrolysis of Biomass Over Molybdenum Oxide Catalysts: A Parametric Study

Journal

ENERGY & FUELS
Volume 34, Issue 4, Pages 4678-4684

Publisher

AMER CHEMICAL SOC
DOI: 10.1021/acs.energyfuels.0c00320

Keywords

-

Funding

  1. U.S. Department of Energy Office of Energy Efficiency and Renewable Energy Bioenergy Technologies Office [DE EE0006636]

Ask authors/readers for more resources

Reactive catalytic fast pyrolysis (RCFP) of biomass with atmospheric pressure hydrogen is a promising route for the deoxygenation of biomass pyrolysis vapors while retaining high carbon yields in the bio-crude. RCFP process development was accomplished in a bench-scale bubbling fluidized-bed reactor with in situ catalyst configuration. Results are presented that highlight the impact of temperature, biomass weight hourly space velocity (WHSV), reaction pressure, and time on stream on the hydrodeoxygenation of different oxygen-containing species produced during biomass reactive catalytic fast pyrolysis to improve the bio-crude product yield and quality. The highest bio-crude and C4+ hydrocarbons yield was 46.5 wt % on a carbon basis. The optimal temperature range for RCFP is 450-475 degrees C; the biomass WHSV should be kept low, around 0.6 h(-1) in this reactor system, to produce a low oxygen content bio-crude (7.2 wt %), and improvements in the bio-crude yield and quality based on increased pressure are less significant beyond 2.7 bar. The product composition varies by at most 10% for up to 3.5 h' time on stream (biomass-to-catalyst ratio of 2.6 g g(-1)), indicating a stable catalyst activity for hydrodeoxygenation.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available