Related references
Note: Only part of the references are listed.Meta-Reinforcement Learning of Machining Parameters for Energy-Efficient Process Control of Flexible Turning Operations
Qinge Xiao et al.
IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2021)
On-line part deformation prediction based on deep learning
Zhiwei Zhao et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2020)
On transfer learning for chatter detection in turning using wavelet packet transform and ensemble empirical mode decomposition
Melih C. Yesilli et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2020)
Multi-sensor measurement and data fusion technology for manufacturing process monitoring: a literature review
Lingbao Kong et al.
INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2020)
Pose-dependent tool tip dynamics prediction using transfer learning
Gengxiang Chen et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)
A novel method for accurately monitoring and predicting tool wear under varying cutting conditions based on meta-learning
Yingguang Li et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)
Deep Transfer Learning Based on Sparse Autoencoder for Remaining Useful Life Prediction of Tool in Manufacturing
Chuang Sun et al.
IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2019)
Data fusion and machine learning for industrial prognosis: Trends and perspectives towards Industry 4.0
Alberto Diez-Olivan et al.
INFORMATION FUSION (2019)
Identification framework for cracks on a steel structure surface by a restricted Boltzmann machines algorithm based on consumer-grade camera images
Yang Xu et al.
STRUCTURAL CONTROL & HEALTH MONITORING (2018)
Toward a new tribological approach to predict cutting tool wear
J. Rech et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)
Prediction of distortion induced by machining residual stresses in thin-walled components
Junteng Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Audio-Based Tool Condition Monitoring in Milling of the Workpiece Material With the Hardness Variation Using Support Vector Machines and Convolutional Neural Networks
Achyuth Kothuru et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Data-driven smart manufacturing
Fei Tao et al.
JOURNAL OF MANUFACTURING SYSTEMS (2018)
A wireless instrumented milling cutter system with embedded PVDF sensors
Ming Luo et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)
Prefrontal cortex as a meta-reinforcement learning system
Jane X. Wang et al.
NATURE NEUROSCIENCE (2018)
A machine vision system for micro-milling tool condition monitoring
Yiquan Dai et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2018)
A Generic Deep-Learning-Based Approach for Automated Surface Inspection
Ruoxu Ren et al.
IEEE TRANSACTIONS ON CYBERNETICS (2018)
Image reconstruction by domain-transform manifold learning
Bo Zhu et al.
NATURE (2018)
Detection and Segmentation of Manufacturing Defects with Convolutional Neural Networks and Transfer Learning
Max Ferguson et al.
SMART AND SUSTAINABLE MANUFACTURING SYSTEMS (2018)
Vision-based system for chatter identification and process optimization in high-speed milling
Norman Lei et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Development and evaluation of a three-component micro-cutting force wireless measurement apparatus and method in turning-milling compound machining
Xin Jin et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Machining vibration states monitoring based on image representation using convolutional neural networks
Yang Fu et al.
ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE (2017)
State-of-the-art in fixture systems for the manufacture and assembly of rigid components: A review
A. Gameros et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
Big data analytics based fault prediction for shop floor scheduling
Wei Ji et al.
JOURNAL OF MANUFACTURING SYSTEMS (2017)
Democratizing digital design and manufacturing using high performance cloud computing: Performance evaluation and benchmarking
Dazhong Wu et al.
JOURNAL OF MANUFACTURING SYSTEMS (2017)
Investigation and Correction of Actual Microphone Response for Chatter Detection in Milling Operations
Lorenzo Sallese et al.
MEASUREMENT & CONTROL (2017)
Smart manufacturing must embrace big data
Andrew Kusiak
NATURE (2017)
Rapid dynamics prediction of tool point for bi-rotary head five-axis machine tool
Jun Zhang et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)
Learning to Monitor Machine Health with Convolutional Bi-Directional LSTM Networks
Rui Zhao et al.
SENSORS (2017)
Intelligent Manufacturing in the Context of Industry 4.0: A Review
Ray Y. Zhong et al.
ENGINEERING (2017)
A Statistical Transfer Learning Perspective for Modeling Shape Deviations in Additive Manufacturing
Longwei Cheng et al.
IEEE ROBOTICS AND AUTOMATION LETTERS (2017)
Nondestructive Testing and Characterization of Residual Stress Field Using an Ultrasonic Method
Song Wentao et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2016)
Using artificial neural networks for the prediction of dimensional error on inclined surfaces manufactured by ball-end milling
Alvar Arnaiz-Gonzalez et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Big data analytics in logistics and supply chain management: Certain investigations for research and applications
Gang Wang et al.
INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2016)
The evolution and future of manufacturing: A review
Behzad Esmaeilian et al.
JOURNAL OF MANUFACTURING SYSTEMS (2016)
Online non-contact surface finish measurement in machining using graph theory-based image analysis
M. Samie Tootooni et al.
JOURNAL OF MANUFACTURING SYSTEMS (2016)
Real-Time Deflection Monitoring for Milling of a Thin-Walled Workpiece by Using PVDF Thin-Film Sensors with a Cantilevered Beam as a Case Study
Ming Luo et al.
SENSORS (2016)
Machine Learning-Based Imaging System for Surface Defect Inspection
Je-Kang Park et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2016)
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Sarah K. Everton et al.
MATERIALS & DESIGN (2016)
Intelligent Fixtures for High Performance Machining
Hans-Christian Moehring et al.
7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (2016)
Machine learning in manufacturing: advantages, challenges, and applications
Thorsten Wuest et al.
PRODUCTION AND MANUFACTURING RESEARCH-AN OPEN ACCESS JOURNAL (2016)
Responsive fixture design using dynamic product inspection and monitoring technologies for the precision machining of large-scale aerospace parts
Yingguang Li et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)
Cloud-based design and manufacturing: A new paradigm in digital manufacturing and design innovation
Dazhong Wu et al.
COMPUTER-AIDED DESIGN (2015)
The rise of big data on cloud computing: Review and open research issues
Ibrahim Abaker Targio Hashem et al.
INFORMATION SYSTEMS (2015)
Big Data in product lifecycle management
Jingran Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Real-time tool wear monitoring in milling using a cutting condition independent method
Mehdi Nouni et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
Human-level control through deep reinforcement learning
Volodymyr Mnih et al.
NATURE (2015)
Big Data for Modern Industry: Challenges and Trends
Shen Yin et al.
PROCEEDINGS OF THE IEEE (2015)
A New Approach to Spatial Tool Wear Analysis and Monitoring
Luka Cerce et al.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING (2015)
Chatter detection in milling machines by neural network classification and feature selection
Mourad Lamraoui et al.
JOURNAL OF VIBRATION AND CONTROL (2015)
Design of an innovative smart turning tool with application to real-time cutting force measurement
Caiwei Xiao et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)
Analysis of Feature Extracting Ability for Cutting State Monitoring Using Deep Belief Networks
Yang Fu et al.
15TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (15TH CMMO) (2015)
Additive Manufacturing Technologies – Rapid Prototyping to Direct Digital Manufacturing
Bernhard Mueller
ASSEMBLY AUTOMATION (2014)
Industry 4.0
Heiner Lasi et al.
BUSINESS & INFORMATION SYSTEMS ENGINEERING (2014)
Discrete-Event Shop-Floor Monitoring System in RFID-Enabled Manufacturing
Jinwen Hu et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2014)
Five-axis tool path and feed rate optimization based on the cutting force-area quotient potential field
Ke Xu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
5-Axis adaptive flank milling of flexible thin-walled parts based on the on-machine measurement
Nuodi Huang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2014)
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
Gustavo Tapia et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)
Monitoring and processing signal applied in machining processes - A review
C. H. Lauro et al.
MEASUREMENT (2014)
Modeling techniques for simulating workpiece deflections in NC milling
P. Kersting et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2014)
On-line tool wear measurement for ball-end milling cutter based on machine vision
Chen Zhang et al.
COMPUTERS IN INDUSTRY (2013)
Vibration analysis in milling titanium alloy based on signal processing of cutting force
Panling Huang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Cutting tool condition monitoring by analyzing surface roughness, work piece vibration and volume of metal removed for AISI 1040 steel in boring
K. Venkata Rao et al.
MEASUREMENT (2013)
On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrations
Zahia Hessainia et al.
MEASUREMENT (2013)
Machine availability monitoring and machining process planning towards Cloud manufacturing
Lihui Wang
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2013)
Survey on data-driven industrial process monitoring and diagnosis
S. Joe Qin
ANNUAL REVIEWS IN CONTROL (2012)
Acoustic Modeling Using Deep Belief Networks
Abdel-rahman Mohamed et al.
IEEE TRANSACTIONS ON AUDIO SPEECH AND LANGUAGE PROCESSING (2012)
Tool wear estimation using an analytic fuzzy classifier and support vector machines
Danko Brezak et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2012)
Support vector machines models for surface roughness prediction in CNC turning of AISI 304 austenitic stainless steel
Ulas Caydas et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2012)
Analysis of surface roughness and cutting force components in hard turning with CBN tool: Prediction model and cutting conditions optimization
Hamdi Aouici et al.
MEASUREMENT (2012)
Assessment of surface profile data acquired by a stylus profilometer
Dong-Hyeok Lee et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2012)
Prediction of milling cutting force coefficients for Aluminum 6082-T4
G. Campatelli et al.
FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012 (2012)
Evaluation of expert system for condition monitoring of a single point cutting tool using principle component analysis and decision tree algorithm
M. Elangovan et al.
EXPERT SYSTEMS WITH APPLICATIONS (2011)
Tool Wear Monitoring Using Acoustic Emissions by Dominant-Feature Identification
Jun-Hong Zhou et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2011)
Chatter in machining processes: A review
Guillem Quintana et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
Vibration analysis of rotating machinery using time-frequency analysis and wavelet techniques
F. Al-Badour et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2011)
On-line chatter detection using servo motor current signal in turning
Liu HongQi et al.
SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2011)
Advanced monitoring of machining operations
R. Teti et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Prediction of surface roughness in the end milling machining using Artificial Neural Network
Azlan Mohd Zain et al.
EXPERT SYSTEMS WITH APPLICATIONS (2010)
A review of machining monitoring systems based on artificial intelligence process models
Jose Vicente Abellan-Nebot et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Analysis and compensation of mass loading effect of accelerometers on tool point FRF measurements for chatter stability predictions
O. Ozsahin et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Feasibility Study of Optical Detection of Chatter Vibration During Milling
Andras Eppel et al.
INTERNATIONAL JOURNAL OF OPTOMECHATRONICS (2010)
Dynamics and Stability of Five-Axis Ball-End Milling
Erdem Ozturk et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2010)
On-line chatter detection and identification based on wavelet and support vector machine
Zhehe Yao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Prediction of shape deviations in machining
E. Brinksmeier et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
Sensorless automated condition monitoring for the control of the predictive maintenance of machine tools
A. Verl et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2009)
In-process surface roughness prediction system using cutting vibrations in turning
D. R. Salgado et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Cutting parameters analysis for the development of a milling process monitoring system based on audible energy sound
E. M. Rubio et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2009)
Development of an intelligent multisensor chatter detection system in milling
E. Kuljanic et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2009)
An enhanced analytical model for residual stress prediction in machining
I. Lazoglu et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Identification of dynamic cutting force coefficients and chatter stability with process damping
Y. Altintas et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Strategies for error prediction and error control in peripheral milling of thin-walled workpiece
M. Wan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
A comprehensive tool-wear/tool-life performance model in the evaluation of NDM (near dry machining) for sustainable manufacturing
P. W. Marksberry et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
A critical analysis of effectiveness of acoustic emission signals to detect tool and workpiece malfunctions in milling operations
Iulian Marinescu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Prediction of tool wear using regression and ANN models in end-milling operation
P. Palanisamy et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
An approach based on current and sound signals for in-process tool wear monitoring
D. R. Salgado et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Tool wear predictive model based on least squares support vector machines
Dongfeng Shi et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2007)
Design, development and testing of a four-component milling dynamometer for the measurement of cutting force and torque
Suleyman Yaldiz et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2007)
An integrated force sensor solution for process monitoring of drilling operations
G. Byrne et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
The effects of cutting speed on tool wear and tool life when machining Inconel 718 with ceramic tools
A. Altin et al.
MATERIALS & DESIGN (2007)
The development of an in-process surface roughness adaptive control system in end milling operations
Julie Z. Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Estimation of tool wear during CNC milling using neural network-based sensor fusion
N. Ghosh et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2007)
The effect of tool wear on tool life of alumina-based ceramic cutting tools while machining hardened martensitic stainless steel
AS Kumar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Wear and tool life of tungsten carbide, PCBN and PCD cutting tools
JA Arsecularatne et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
High frequency bandwidth cutting force measurement in milling using capacitance displacement sensors
A Albrecht et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Cutting force monitoring in the endmilling operation for chatter detection
MC Yoon et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2005)
A new approach to cutting state monitoring in end-mill machining
DY Song et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks
T Özel et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Quantification of tool wear using white light interferometry and three-dimensional computational metrology
TG Dawson et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Tool breakage detection using support vector machine learning in a milling process
S Cho et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Manufacturing performance: evaluation and determinants
C Leachman et al.
INTERNATIONAL JOURNAL OF OPERATIONS & PRODUCTION MANAGEMENT (2005)
Analytical modeling of tool wear progression during turning particulate reinforced metal matrix composites
HA Kishawy et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2005)
An artificial-neural-networks-based in-process tool wear prediction system in milling operations
JC Chen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2005)
Milling error prediction and compensation in machining of low-rigidity parts
S Ratchev et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Free-form surface inspection techniques state of the art review
YD Li et al.
COMPUTER-AIDED DESIGN (2004)
Time-frequency-analysis-based minor cutting edge fracture detection during end milling
XL Li et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2004)
Tool life determination based on the measurement of wear and tool force ratio variation
SE Oraby et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
Identification of common sensory features for the control of CNC milling operations under varying cutting conditions
YM Ertekin et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Predicting surface roughness in machining: a review
PG Benardos et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
On-line chatter detection using wavelet-based parameter estimation
T Choi et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2003)
Prediction of surface roughness and dimensional deviation by measuring cutting forces and vibrations in turning process
KA Risbood et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Multilevel classification of milling tool wear with confidence estimation
RK Fish et al.
IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE (2003)
Surface roughness prediction based on cutting parameters and tool vibrations in turning operations
OB Abouelatta et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Predicting machining errors in turning using hybrid learning
X Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2001)