High-solids enzymatic hydrolysis of ball-milled corn stover with reduced slurry viscosity and improved sugar yields

Background High-solids enzymatic hydrolysis has attracted increasing attentions for the production of bioethanol from lignocellulosic biomass with its advantages of high product concentration, water saving, and low energy and capital costs. However, the increase of solids content would worsen the rheological properties, resulting in heat/mass transfer limitation and higher mixing energy. To address these issues, ball milling was applied to corn stover prior to enzymatic hydrolysis, and the rheological behaviors and digestibility of ball-milled corn stover under high-solids loading were investigated. Results Ball milling significantly modified the physicochemical properties of corn stover. The apparent viscosity of slurries at 30% solid loading decreased by a factor of 500 after milling for 60 min, and the yield stress was less than 10 Pa. The dramatic decrease of viscosity and yield stress enabled the hydrolysis process to be conducted in shake flask, and remained good mixing. Meanwhile, the estimated energy consumption for mixing during saccharification decreased by 400-fold compared to the untreated one. The resultant hydrolysate using 10 FPU g(-1) solids was determined to contain 130.5 g L-1 fermentable sugar, and no fermentation inhibitors were detected. Conclusions The proposed ball milling pretreatment improved rheological behavior and sugar yield of high-solids corn stover slurry. Ball milling enables high-solids slurry to maintain low viscosity and yield stress while obtaining a non-toxic high-concentration fermentable syrup, which is undoubtedly of great significance for inter-unit processing, mixing and downstream process. In addition, the energy input for ball milling could be balanced by the reduced mixing energy. Our study indicates ball milling a promising pretreatment process for industrial bioethanol production.