Product distribution of CO2 hydrogenation by K- and Mn-promoted Fe catalysts supported on N-functionalized carbon nanotubes

An iron based catalyst supported on an N-functionalized carbon nanotube (NCNT) was promoted with potassium and manganese as follows: Fe/NCNT, K/Fe/NCNT, Mn/Fe/NCNT, and K/Mn/Fe/NCNT for CO2 hydrogenation. Time-resolved reduction X-ray absorption near edge spectroscopy (XANES) showed mixed phases of Fe, FeO, Fe2O3, and Fe2O3 resulting from K/Fe/NCNT, and of FeO and Fe2O3 resulting from Mn/Fe/NCNT. The product distributions and growth probability of n-alkanes during CO2 hydrogenation indicated that the potassium-promoted iron catalysts performed Fischer-Tropsch (FT) synthesis under steady state at 60 h. 1-Alkenes desorbed from the FT sites with the potassium-promoted catalysts, (K/Fe/NCNT and K/Mn/Fe/NCNT), with low methane formation. Small amounts of 1-alkene, along with high methanation, were produced from the potassium-unpromoted catalysts, (Fe/NCNT and Mn/Fe/NCNT), indicating high local H-2:CO ratios on the catalyst surfaces. K/Fe/NCNT and K/Mn/Fe/NCNT catalysts also produced ethanol. Thus, potassium is a key promoter providing active species of the catalysts for alkene and ethanol formation. Reduced surrounding of the NCNT support, potassium as an electronic promoter together with manganese as a structural promoter made the iron-active phase well suitable for CO2 hydrogenation producing mainly alkenes and ethanol. (C) 2016 Elsevier B.V. All rights reserved.