Related references
Note: Only part of the references are listed.Masquelet technique for open tibia fractures in a military setting
Laurent Mathieu et al.
EUROPEAN JOURNAL OF TRAUMA AND EMERGENCY SURGERY (2020)
Feasibility and safety of treating non-unions in tibia, femur and humerus with autologous, expanded, bone marrow-derived mesenchymal stromal cells associated with biphasic calcium phosphate biomaterials in a multicentric, non-comparative trial
Enrique Gomez-Barrena et al.
BIOMATERIALS (2019)
3D printing of ceramics: A review
Zhangwei Chen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
INDUCED-MEMBRANE TECHNIQUE IN THE MANAGEMENT OF POSTTRAUMATIC BONE DEFECTS
Matheus Lemos Azi et al.
JBJS ESSENTIAL SURGICAL TECHNIQUES (2019)
New clinical application of three-dimensional-printed polycaprolactone/β-tricalcium phosphate scaffold as an alternative to allograft bone for limb-sparing surgery in a dog with distal radial osteosarcoma
Seongjae Choi et al.
JOURNAL OF VETERINARY MEDICAL SCIENCE (2019)
Multimodal pore formation in calcium phosphate cements
Irene Lodoso-Torrecilla et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)
Assessment of hydrogels for bioprinting of endothelial cells
Leo Benning et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)
Autologous cell-based therapy for treatment of large bone defects: from bench to bedside
R. Verboket et al.
EUROPEAN JOURNAL OF TRAUMA AND EMERGENCY SURGERY (2018)
Collagen-alginate as bioink for three-dimensional (3D) cell printing based cartilage tissue engineering
Xingchen Yang et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2018)
In Vivo Evaluation of 3D-Printed Polycaprolactone Scaffold Implantation Combined with -TCP Powder for Alveolar Bone Augmentation in a Beagle Defect Model
Su A. Park et al.
MATERIALS (2018)
Contribution of 3D printing to mandibular reconstruction after cancer
A. Dupret-Bories et al.
EUROPEAN ANNALS OF OTORHINOLARYNGOLOGY-HEAD AND NECK DISEASES (2018)
Bone substitutes: a review of their characteristics, clinical use, and perspectives for large bone defects management
Gabriel Fernandez de Grado et al.
JOURNAL OF TISSUE ENGINEERING (2018)
Current state of fabrication technologies and materials for bone tissue engineering
Abiy Wubneh et al.
ACTA BIOMATERIALIA (2018)
Dimensional evaluation of patient-specific 3D printing using calcium phosphate cement for craniofacial bone reconstruction
Liciane Sabadin Bertol et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2017)
Mandibular reconstruction after cancer: an in-house approach to manufacturing cutting guides
R. Bosc et al.
INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2017)
Induced membrane technique: Advances in the management of bone defects
Weifeng Han et al.
INTERNATIONAL JOURNAL OF SURGERY (2017)
3D printed porous ceramic scaffolds for bone tissue engineering: a review
Yu Wen et al.
BIOMATERIALS SCIENCE (2017)
3D printed TCP-based scaffold incorporating VEGF-loaded PLGA microspheres for craniofacial tissue engineering
F. Fahimipour et al.
DENTAL MATERIALS (2017)
Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability
Naomi Paxton et al.
BIOFABRICATION (2017)
Polymer structure-property requirements for stereolithographic 3D printing of soft tissue engineering scaffolds
Ryan J. Mondschein et al.
BIOMATERIALS (2017)
Current advances and future perspectives in extrusion-based bioprinting
Ibrahim T. Ozbolat et al.
BIOMATERIALS (2016)
3D bioprinting for engineering complex tissues
Christian Mandrycky et al.
BIOTECHNOLOGY ADVANCES (2016)
Powder-based 3D printing for bone tissue engineering
G. Brunello et al.
BIOTECHNOLOGY ADVANCES (2016)
Robocasting of structural ceramic parts with hydrogel inks
Ezra Feilden et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
The Evolution of Free Vascularized Bone Transfer: A 40-Year Experience
G. Ian Taylor et al.
PLASTIC AND RECONSTRUCTIVE SURGERY (2016)
Bone regeneration strategies with bone marrow stromal cells in orthopaedic surgery
J. Stanovici et al.
CURRENT RESEARCH IN TRANSLATIONAL MEDICINE (2016)
Poly(dopamine) coating of 3D printed poly(lactic acid) scaffolds for bone tissue engineering
Chia-Tze Kao et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Evaluating 3D-Printed Biomaterials as Scaffolds for Vascularized Bone Tissue Engineering
Martha O. Wang et al.
ADVANCED MATERIALS (2015)
Laser 3D Printing with Sub-Microscale Resolution of Porous Elastomeric Scaffolds for Supporting Human Bone Stem Cells
Peter E. Petrochenko et al.
ADVANCED HEALTHCARE MATERIALS (2015)
Biomineral Coating Increases Bone Formation by Ex Vivo BMP-7 Gene Therapy in Rapid Prototyped Poly(L-lactic acid) (PLLA) and Poly(epsilon-caprolactone) (PCL) Porous Scaffolds
Eiji Saito et al.
ADVANCED HEALTHCARE MATERIALS (2015)
3D Artificial Bones for Bone Repair Prepared by Computed Tomography-Guided Fused Deposition Modeling for Bone Repair
Ning Xu et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
3D Bioprinting of Vascularized, Heterogeneous Cell-Laden Tissue Constructs
David B. Kolesky et al.
ADVANCED MATERIALS (2014)
In Vivo Bioreactors for Mandibular Reconstruction
A. M. Tatara et al.
JOURNAL OF DENTAL RESEARCH (2014)
3D bioprinting of tissues and organs
Sean V. Murphy et al.
NATURE BIOTECHNOLOGY (2014)
Bone regenerative medicine: classic options, novel strategies, and future directions
Ahmad Oryan et al.
JOURNAL OF ORTHOPAEDIC SURGERY AND RESEARCH (2014)
Calcium phosphate ceramics in bone tissue engineering: A review of properties and their influence on cell behavior
Satyavrata Samavedi et al.
ACTA BIOMATERIALIA (2013)
Bovine Xenograft Failures in Pediatric Foot Reconstructive Surgery
Cameron K. Ledford et al.
JOURNAL OF PEDIATRIC ORTHOPAEDICS (2013)
Selective laser sintering in biomedical engineering
Alida Mazzoli
MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING (2013)
Bone graft substitutes currently available in orthopaedic practice THE EVIDENCE FOR THEIR USE
T. Kurien et al.
BONE & JOINT JOURNAL (2013)
Vascular tissues are a primary source of BMP2 expression during bone formation induced by distraction osteogenesis
Hidenori Matsubara et al.
BONE (2012)
Incorporation of Bovine-based Structural Bone Grafts Used in Reconstructive Foot Surgery
Naohiro Shibuya et al.
JOURNAL OF FOOT & ANKLE SURGERY (2012)
In Vivo and In Vitro Comparison of Three Different Allografts Vitalized with Human Mesenchymal Stromal Cells
Laura Coquelin et al.
TISSUE ENGINEERING PART A (2012)
Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprinting
Martin Gruene et al.
BIOMEDICAL ENGINEERING ONLINE (2011)
Bone regeneration: current concepts and future directions
Rozalia Dimitriou et al.
BMC MEDICINE (2011)
Allograft bone matrix versus synthetic bone graft substitutes
Gerald Zimmermann et al.
INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2011)
Bone regeneration: stem cell therapies and clinical studies in orthopaedics and traumatology
Enrique Gomez-Barrena et al.
JOURNAL OF CELLULAR AND MOLECULAR MEDICINE (2011)
Outcome of Subtalar Fusion Using Bovine Cancellous Bone Graft: A Retrospective Case Series
Sunit Patil et al.
JOURNAL OF FOOT & ANKLE SURGERY (2011)
Failed operative treatment in two cases of pseudarthrosis of the clavicle using internal fixation and bovine cancellous xenograft (Tutobone)
Robin R. Elliot et al.
JOURNAL OF PEDIATRIC ORTHOPAEDICS-PART B (2011)
Fabrication of tissue engineered PCL scaffold by selective laser-sintered machine for osteogeneisis of adipose-derived stem cells The research has proven that a bone tissue-engineered scaffold can be made using the selective laser sintering method
Han-Tsung Liao et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2011)
Late Complications and Survival of Endoprosthetic Reconstruction after Resection of Bone Tumors
Ahmad Shehadeh et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2010)
Prefabrication of vascularized bioartificial bone grafts in vivo for segmental mandibular reconstruction: experimental pilot study in sheep and first clinical application
H. Kokemueller et al.
INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2010)
3D powder printed calcium phosphate implants for reconstruction of cranial and maxillofacial defects
Uwe Klammert et al.
JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY (2010)
The Concept of Induced Membrane for Reconstruction of Long Bone Defects
Alain C. Masquelet et al.
ORTHOPEDIC CLINICS OF NORTH AMERICA (2010)
Bone grafting, orthopaedic biomaterials, and the clinical need for bone engineering
A. S. Brydone et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2010)
Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering
Lutz-Christian Gerhardt et al.
MATERIALS (2010)
Ilizarov principles or deformity correction
B. Spiegelberg et al.
ANNALS OF THE ROYAL COLLEGE OF SURGEONS OF ENGLAND (2010)
Novel maxillary reconstruction with ectopic bone formation by GMP adipose stem cells
K. Mesimaki et al.
INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2009)
Bovine cancellous xenograft in the treatment of tibial plateau fractures in elderly patients
M. R. Bansal et al.
INTERNATIONAL ORTHOPAEDICS (2009)
THE USE OF VASCULARIZED FIBULAR GRAFTS FOR THE RECONSTRUCTION OF SPINAL AND SACRAL DEFECTS
Steven L. Moran et al.
MICROSURGERY (2009)
3D Powder Printing of beta-Tricalcium Phosphate Ceramics Using Different Strategies
Elke Vorndran et al.
ADVANCED ENGINEERING MATERIALS (2008)
The diamond concept - open questions
Peter V. Giannoudis et al.
INJURY-INTERNATIONAL JOURNAL OF THE CARE OF THE INJURED (2008)
Vascularized Bone Grafts and Their Applications in the Treatment of Carpal Pathology
Marco Rizzo et al.
Seminars in Plastic Surgery (2008)
Combined Massive Allograft and Intramedullary Vascularized Fibula Transfer: The Capanna Technique for Lower-Limb Reconstruction
Karim Bakri et al.
Seminars in Plastic Surgery (2008)
Direct ink writing of three-dimensional ceramic structures
Jennifer A. Lewis et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)
Direct ink writing of 3D functional materials
Jennifer A. Lewis
ADVANCED FUNCTIONAL MATERIALS (2006)
Endoprosthetic reconstruction in 250 patients with sarcoma
Georg Gosheger et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2006)
Sintering and robocasting of β-tricalcium phosphate scaffolds for orthopaedic applications
P Miranda et al.
ACTA BIOMATERIALIA (2006)
Mandible Augmentation for Osseointegrated Implants Using Tissue Engineering Strategies
Ming-Huei Cheng et al.
PLASTIC AND RECONSTRUCTIVE SURGERY (2006)
Histological assessment in grafts of highly purified beta-tricalcium phosphate (OSferion®) in human bones
A Ogose et al.
BIOMATERIALS (2006)
Transformation of a prefabricated hydroxyapatite/osteogenic protein-1 implant into a vascularised pedicled bone flap in the human chest
M Heliotis et al.
INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2006)
Ceramic bioactivity: progresses, challenges and perspectives
K-Y Lee et al.
BIOMEDICAL MATERIALS (2006)
Concentrated hydroxyapatite inks for direct-write assembly of 3-D periodic scaffolds
S Michna et al.
BIOMATERIALS (2005)
Medical rapid prototyping technologies: State of the art and current limitations for application in oral and maxillofacial surgery
J Winder et al.
JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY (2005)
Maxillary reconstruction with the free fibula flap
X Peng et al.
PLASTIC AND RECONSTRUCTIVE SURGERY (2005)
Periprosthetic infection in patients treated for an orthopaedic oncological condition
LM Jeys et al.
JOURNAL OF BONE AND JOINT SURGERY-AMERICAN VOLUME (2005)
Customization of load-bearingy hydroxyapatite lattice scaffolds
J Cesarano et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2005)
Intercalary femur and tibia segmental allografts provide an acceptable alternative in reconstructing tumor resections
DL Muscolo et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2004)
Free-flap mandibular reconstruction: A 10-year follow-up study
DA Hidalgo et al.
PLASTIC AND RECONSTRUCTIVE SURGERY (2002)
Osteoinduction, osteoconduction and osseointegration
T Albrektsson et al.
EUROPEAN SPINE JOURNAL (2001)
Substitutes for autologous bone graft in orthopaedic trauma
JF Keating et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2001)
Share Paper
