Related references
Note: Only part of the references are listed.Supersonic Cold Spraying for Energy and Environmental Applications: One-Step Scalable Coating Technology for Advanced Micro- and Nanotextured Materials
Seongpil An et al.
ADVANCED MATERIALS (2020)
Using friction stir processing to augment corrosion resistance of cold sprayed AA2024/Al2O3 composite coatings
Kang Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Near surface transformations of stainless steel cold spray and laser cladding deposits after turning and ball-burnishing
C. Courbon et al.
SURFACE & COATINGS TECHNOLOGY (2019)
In-situ Sip/A380 alloy nano micro composite formation through cold spray additive manufacturing and subsequent hot rolling treatment: Microstructure and mechanical properties
Xiang Qiu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Influence of annealing treatment on microstructure and magnetic properties of cold sprayed Ni-coated FeSiAl soft magnetic composite coating
Xinliang Xie et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Microstructural and mechanical properties of high-performance Inconel 718 alloy by cold spraying
Wenhua Ma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Annealing strategies for enhancing mechanical properties of additively manufactured 316L stainless steel deposited by cold spray
Shuo Yin et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Effect of hot isostatic pressing (HIP) on microstructure and mechanical properties of Ti6Al4V alloy fabricated by cold spray additive manufacturing
Chaoyue Chen et al.
ADDITIVE MANUFACTURING (2019)
Improving microstructural and mechanical characteristics of cold-sprayed Inconel 718 deposits via local induction heat treatment
Wen Sun et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Evaluation of residual stresses induced by cold spraying of Ti-6Al-4V on Ti-6Al-4V substrates
Dibakor Boruah et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Effect of Substrate Surface Roughness on Microstructure and Mechanical Properties of Cold-Sprayed Ti6Al4V Coatings on Ti6Al4V Substrates
Adrian Wei-Yee Tan et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2019)
Evaluation of cold sprayed graphene nanoplates-Inconel 718 composite coatings
Wen Sun et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Influence of hot isostatic pressing on structure and properties of titanium cold-spray deposits
P. Petrovskiy et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Achieving strength-ductility synergy in cold spray additively manufactured Al/B4C composites through a hybrid post-deposition treatment
Naeem Ul Haq Tariq et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Strategy of incorporating Ni-based braze alloy in cold sprayed Inconel 718 coating
Wen Sun et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Effects of Nd:YAG Laser Surface Treatment on Tribological Properties of Cold-Sprayed Ti-6Al-4V Coatings Tested against 100Cr6 Steel under Dry Condition
N. W. Khun et al.
TRIBOLOGY TRANSACTIONS (2019)
Elucidation of cold-spray deposition mechanism by auger electron spectroscopic evaluation of bonding interface oxide film
Yuji Ichikawa et al.
ACTA MATERIALIA (2019)
Theoretical prediction of residual stresses induced by cold spray with experimental validation
Dibakor Boruah et al.
MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES (2019)
Post-spray modification of cold-sprayed Ni-Ti coatings by high-temperature vacuum annealing and friction stir processing
C. J. Huang et al.
APPLIED SURFACE SCIENCE (2018)
Optimization of cold-sprayed AA2024/Al2O3 metal matrix composites via friction stir processing: Effect of rotation speeds
Kang Yang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Deposition characteristics of cold sprayed Inconel 718 particles on Inconel 718 substrates with different surface conditions
Wen Sun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of coating thickness on microstructure, mechanical properties and fracture behaviour of cold sprayed Ti6Al4V coatings on Ti6Al4V substrates
Adrian Wei-Yee Tan et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Effect of heat treatment on the inherent anisotropy of cold sprayed copper deposits
Kang Yang et al.
SURFACE & COATINGS TECHNOLOGY (2018)
Thermo-mechanical post-treatment: A strategic approach to improve microstructure and mechanical properties of cold spray additively manufactured composites
N. H. Tariq et al.
MATERIALS & DESIGN (2018)
Adiabatic shear instability is not necessary for adhesion in cold spray
Mostafa Hassani-Gangaraj et al.
ACTA MATERIALIA (2018)
Interfacial bonding mechanisms between aluminum and titanium during cold gas spraying followed by friction-stir modification
F. Khodabakhshi et al.
APPLIED SURFACE SCIENCE (2018)
Understanding the microstructural evolution of cold sprayed Ti-6Al-4V coatings on Ti-6Al-4V substrates
Jun Yan Lek et al.
APPLIED SURFACE SCIENCE (2018)
Residual stresses in single particle splat of metal cold spray process - Numerical simulation and direct measurement
Xu Song et al.
MATERIALS LETTERS (2018)
Influence of Particle Velocity When Propelled Using N2 or N2-He Mixed Gas on the Properties of Cold-Sprayed Ti6Al4V Coatings
Adrian Wei-Yee Tan et al.
COATINGS (2018)
Effects of Post-spray Heat Treatment on Hardness and Wear Properties of Ti-WC High-Pressure Cold Spray Coatings
Jonathan Tang et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2018)
Investigation of the interfacial reactions between steel and aluminum coatings for hybrid casting
K. Bobzin et al.
20TH CHEMNITZ SEMINAR ON MATERIALS ENGINEERING (2018)
Cold spray additive manufacturing and repair: Fundamentals and applications
Shuo Yin et al.
ADDITIVE MANUFACTURING (2018)
Effect of Heat Treatment Temperature on Microstructure and Mechanical and Tribological Properties of Cold Sprayed Ti-6Al-4V Coatings
N. W. Khun et al.
TRIBOLOGY TRANSACTIONS (2017)
Effects of Traverse Scanning Speed of Spray Nozzle on the Microstructure and Mechanical Properties of Cold-Sprayed Ti6Al4V Coatings
Adrian Wei-Yee Tan et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)
Effect of Turning and Ball Burnishing on the Microstructure and Residual Stress Distribution in Stainless Steel Cold Spray Deposits
A. Sova et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)
Wear and Corrosion Resistance of Thick Ti-6Al-4V Coating Deposited on Ti-6Al-4V Substrate via High-Pressure Cold Spray
N. W. Khun et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)
Characterization of heat treatment-induced pore structure changes in cold-sprayed titanium
Y. Q. Ren et al.
MATERIALS CHARACTERIZATION (2017)
Microstructural evolution and mechanical properties enhancement of a cold-sprayed Cu-Zn alloy coating with friction stir processing
Chunjie Huang et al.
MATERIALS CHARACTERIZATION (2017)
Friction-stir processing of a cold sprayed AA7075 coating layer on the AZ31B substrate: Structural homogeneity, microstructures and hardness
F. Khodabakhshi et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Effect of substrate surface condition on fatigue behavior of cold sprayed Ti6A14V coatings
Wen Sun et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Adhesion, tribological and corrosion properties of cold-sprayed CoCrMo and Ti6A14V coatings on 6061-T651 Al alloy
Wen Sun et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Effects of laser remelting process on the microstructure, roughness and microhardness of in-situ cold sprayed hypoeutectic Al-Si coating
Nan Kang et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Enhanced erosion performance of cold spray co-deposited AISI316 MMCs modified by friction stir processing
Tom Peat et al.
MATERIALS & DESIGN (2017)
The erosion performance of cold spray deposited metal matrix composite coatings with subsequent friction stir processing
Tom Peat et al.
APPLIED SURFACE SCIENCE (2017)
Joining of Cast ZE41A Mg to Wrought 6061 Al by the Cold Spray Process and Friction Stir Welding
Victor Kenneth Champagne et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2016)
Cold spraying - A materials perspective
H. Assadi et al.
ACTA MATERIALIA (2016)
Effect of Tool Rotation Speed on Microstructure and Microhardness of Friction-Stir-Processed Cold-Sprayed SiCp/Al5056 Composite Coating
Chunjie Huang et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2016)
Influence of annealing on mechanical and electrochemical properties of cold sprayed niobium coatings
S. Kumar et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Modification of a cold sprayed SiCp/Al5056 composite coating by friction stir processing
Chunjie Huang et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Influence of ball burnishing on residual stress profile of a 15-5PH stainless steel
V. Chomienne et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2016)
Selective Laser Post-Treatment on Titanium Cold Spray Coatings
Felice Rubino et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
Fatigue behavior of cold spray coatings: The effect of conventional and severe shot peening as pre-/post-treatment
A. Moridi et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Microstructure and mechanical properties of cold sprayed 7075 deposition during non-isothermal annealing
M. R. Rokni et al.
SURFACE & COATINGS TECHNOLOGY (2015)
The effects of heat treatment on the mechanical properties of cold-sprayed coatings
Renzhong Huang et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Study of the laser remelting of a cold sprayed titanium layer.
A. Astarita et al.
9TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING - CIRP ICME '14 (2015)
Intermixing and interfacial morphology of cold-sprayed Al coatings on steel
K. H. Ko et al.
MATERIALS LETTERS (2014)
Analysis of the residual stress and bonding mechanism in the cold spray technique using experimental and numerical methods
Michael Saleh et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Mechanical properties of Inconel 625 cold-sprayed coatings after laser remelting. Depth sensing indentation analysis
P. Poza et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Cold spray coating: review of material systems and future perspectives
A. Moridi et al.
SURFACE ENGINEERING (2014)
Cold Spray Forming of Inconel 718
W. Wong et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2013)
Densification and Purification of Cold Sprayed Ti Coating Layer by using Annealing in Different Heat Treatment Environments
Ji-Sang Yu et al.
PROGRESS IN MATERIALS AND PROCESSES, PTS 1-3 (2013)
Deformation behavior of the oxide film on the surface of cold sprayed powder particle
Shuo Yin et al.
APPLIED SURFACE SCIENCE (2012)
Fabrication of aluminum-alumina metal matrix composites via cold gas dynamic spraying at low pressure followed by friction stir processing
K. J. Hodder et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Residual stresses in cold spray Al coatings: The effect of alloying and of process parameters
K. Spencer et al.
SURFACE & COATINGS TECHNOLOGY (2012)
Residual stress and thermo-mechanical properties of cold spray metal coatings
V. Luzin et al.
ACTA MATERIALIA (2011)
Influence of annealing treatment on the microstructure and mechanical performance of cold sprayed 304 stainless steel coating
Xian-Ming Meng et al.
APPLIED SURFACE SCIENCE (2011)
Fabrication of in situ Cu/SiC composites using multi-pass friction stir processing: Evaluation of microstructural, porosity, mechanical and electrical behavior
Mohsen Barmouz et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Formation and behavior of Kirkendall voids within intermetallic layers of solder joints
Doosoo Kim et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2011)
Corrosion Performance of Laser Posttreated Cold Sprayed Titanium Coatings
T. Marrocco et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2011)
On the characterization of bulk copper produced by cold gas dynamic spray processing in as fabricated and annealed conditions
Paul D. Eason et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Effect of annealing on the microstructure and erosion performance of cold-sprayed FeAl intermetallic coatings
Guan-Jun Yang et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Bonding features and associated mechanisms in kinetic sprayed titanium coatings
Gyuyeol Bae et al.
ACTA MATERIALIA (2009)
Effect of heat treatment on microstructure and mechanical properties of cold sprayed Ti coatings with relatively large powder particles
W. -Y. Li et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2009)
Influence of Particle Velocity on Adhesion of Cold-Sprayed Splats
S. Guetta et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2009)
Dynamic recrystallization in the particle/particle interfacial region of cold-sprayed nickel coating: Electron backscatter diffraction characterization
Yu Zou et al.
SCRIPTA MATERIALIA (2009)
Heat treatment of cold spray coatings to form protective intermetallic layers
K. Spencer et al.
SCRIPTA MATERIALIA (2009)
Cold spraying of Fe/Al powder mixture: Coating characteristics and influence of heat treatment on the phase structure
Hong-Tao Wang et al.
APPLIED SURFACE SCIENCE (2008)
Study of oxidation behavior of nanostructured NiCrAlY bond coatings deposited by cold spraying
Qiang Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Effect of heat treatment on the microstructure and property of cold-sprayed nanostructured FeAl/Al2O3 intermetallic composite coating
Hong-Tao Wang et al.
VACUUM (2008)
Effect of process parameters and heat treatments on properties of cold sprayed copper coatings
P. Sudharshan Phani et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2007)
Ultrafine grained structure formation in steels using dynamic strain induced transformation processing
H. Beladi et al.
INTERNATIONAL MATERIALS REVIEWS (2007)
Fabrication of cold sprayed Al-intermetallic compounds coatings by post annealing
Ha Yong Lee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Improvement of microstructure and property of cold-sprayed Cu-4 at.%Cr-2 at.%Nb alloy by heat treatment
W. -Y. Li et al.
SCRIPTA MATERIALIA (2006)
The effects of gas and metal characteristics on sprayed metal coatings
V Champagne et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2005)
Interface material mixing formed by the deposition of copper on aluminum by means of the cold spray process
VK Champagne et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2005)
Bonding mechanism in cold gas spraying
H Assadi et al.
ACTA MATERIALIA (2003)
Share Paper
