Related references
Note: Only part of the references are listed.Combined treatment plasma electrolytic carburizing and borocarburizing on Q235 low-carbon steel
Bin Wang et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
Characterization of Different Surface Layers Produced by Solid Boron-Nitro-Carburizing Thermochemical Treatment on AISI 1020
Alexandre Galiotto et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2019)
Sliding wear of borided sintered AISI M2 steel coated with AlTiN/CrN multilayer
E. A. dos S. de Almeida et al.
WEAR (2018)
Experimental Investigations on the Effects of Multicomponent Laser Boriding on steels
M. Prince et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Investigation of borided layers contribution on the wear resistance and adhesion of TiN coatings
Elisangela Aparecida dos Santos de Almeida et al.
MATERIA-RIO DE JANEIRO (2017)
Effect of borotitanizing on microstructure and wear behavior of Inconel 625
Ali Gunen et al.
SURFACE & COATINGS TECHNOLOGY (2017)
Micro-abrasive wear mechanisms of borided AISI 1020 steel
A. P. Krelling et al.
TRIBOLOGY INTERNATIONAL (2017)
Boro-nitriding coating on pure iron by powder-pack boriding and nitriding processes
O. A. Gomez-Vargas et al.
MATERIALS LETTERS (2016)
Effect of sliding distance on abrasive wear modes transition
Ronaldo Camara Cozza
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2015)
Tribological behaviour of borided H13 steel with different boriding agents
A. P. Krelling et al.
SURFACE ENGINEERING (2015)
Wear and corrosion resistance of niobium-chromium carbide coatings on AISI D2 produced through TRD
F. E. Castillejo et al.
SURFACE & COATINGS TECHNOLOGY (2014)
A study of the wear performance of duplex treated commercial low-alloy steel against alumina and WC balls
Nasser Eddine Beliardouh et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Effect of boronizing on the oxidation of niobium
E. Dokumaci et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2013)
Effect of load partition and particle distribution on micro-abrasive wear mapping of two-phase metal matrix composites
G. H. S. Gava et al.
WEAR (2013)
Effect of laser surface modification on the micro-abrasive wear resistance of coated cemented carbide tools
W. M. da Silva et al.
WEAR (2013)
Mechanical properties of paste carburized ASTM A516 steel
Siti Khadijah Alias et al.
INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013 (2013)
A Study of Chromo-Boronizing on DIN 1.2714 Steel by Duplex Surface Treatment
M. Aghaie-Khafri et al.
JOM (2012)
Formation of multi-component boronization by adding transition metal group VIB
Naruemon Suwattananont et al.
SOLID STATE SCIENCES (2012)
Research on wear characteristics of AISI 1035 steel boronized at various parameters
N. Kiratli et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2011)
Structural properties and kinetics of nitro-niobized steels
Saduman Sen et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Plasma paste boronizing of AISI 8620, 52100 and 440C steels
I. Gunes et al.
MATERIALS & DESIGN (2011)
Duplex surface treatment of AISI 1045 steel via plasma nitriding of chromized layer
F. Hakami et al.
THIN SOLID FILMS (2011)
Influence of heat treatments on the micro-abrasion wear resistance of a superduplex stainless steel
F. Marques et al.
WEAR (2011)
Ball cratering test on ductile materials
Rafael Vieira Camerini et al.
WEAR (2011)
Dry sliding wear behaviour of medium carbon steel against an alumina disk
Shiv Kumar et al.
WEAR (2011)
Preparation of borides in Nb-B and Cr-B systems by combustion synthesis involving borothermic reduction of Nb2O5 and Cr2O3
C. L. Yeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Effects of boronizing on mechanical and dry-sliding wear properties of CoCrMo alloy
Dong Mu et al.
MATERIALS & DESIGN (2010)
Evaluation of microstructures and wear properties of duplex boride coatings
V. Samadi et al.
MATERIALS SCIENCE AND TECHNOLOGY (2010)
Evaluation of vanadium carbide coatings on AISI H13 obtained by thermo-reactive deposition/diffusion technique
X. S. Fan et al.
SURFACE & COATINGS TECHNOLOGY (2010)
The effect of boronizing and boro-chromizing on tribological performance of AISI 52100 bearing steels
Saduman Sen et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2009)
Effects of boronizing process on the surface roughness and dimensions of AISI 1020, AISI 1040 and AISI 2714
Salim Sahin
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Characterization and determination of FexB layers' mechanical properties
O. Culha et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Niobium boride coating on AISI M2 steel by boro-niobizing treatment
Ugur Sen et al.
MATERIALS LETTERS (2008)
Study of microcracks morphology produced by Vickers indentation on AISI 1045 borided steels
I. Campos et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Boroaluminide coatings on ferritic-martensitic steel deposited by low-temperature pack cementation
S. A. Tsipas et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Relationship between test severity and wear mode transition in micro-abrasive wear tests
R. C. Cozza et al.
WEAR (2007)
Tribological investigation of tantalum boride coating under dry and simulated body fluid conditions
R. Ribeiro et al.
WEAR (2007)
Formation of chromium nitride layers on AISI 1010 steel by nitro-chromizing treatment
Ozkan Ozdemir et al.
VACUUM (2007)
A comparative study of borided pure niobium, tungsten and chromium
Metin Usta et al.
VACUUM (2006)
Analysis of perforating and non-perforating micro-scale abrasion tests on coated substrates
KI Schiffmann et al.
SURFACE & COATINGS TECHNOLOGY (2005)
The characterization of borided pure niobium
M Usta
SURFACE & COATINGS TECHNOLOGY (2005)
The characterization of vanadium boride coatings on AISI 8620 steel
S Sen
SURFACE & COATINGS TECHNOLOGY (2005)
Optimum tests conditions for attaining uniform rolling abrasion in ball cratering tests on hard coatings
K Bose et al.
WEAR (2005)
Cr(N,C) diffusion coating formation on pre-nitrocarburised H13 tool steel
PC King et al.
SURFACE & COATINGS TECHNOLOGY (2004)
Micro-abrasion transitions of metallic materials
MM Stack et al.
WEAR (2003)
Grooving micro-abrasion of polyamide 11 coated carbon steel tubulars for downhole application
JO Bello et al.
WEAR (2003)
Wear-mode mapping for the micro-scale abrasion test
K Adachi et al.
WEAR (2003)
Characterisation of duplex and non-duplex (Ti, Al)N and Cr-NPVD coatings
JCA Batista et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Micro-scale abrasive wear testing of duplex and non-duplex (single-layered) PVD (Ti,Al)N, TiN and Cr-N coatings
JCA Batista et al.
TRIBOLOGY INTERNATIONAL (2002)
Roughness parameters
ES Gadelmawla et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Boron-aluminide coatings applied by pack cementation method on low-alloy steels
NE Maragoudakis et al.
MATERIALS LETTERS (2002)
The formation of diffusion coatings on some low-alloy steels and their high temperature oxidation behaviour: Part 1 diffusion coatings
R Jha et al.
CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2001)