Related references
Note: Only part of the references are listed.3D-Printing of Functionally Graded Porous Materials Using On-Demand Reconfigurable Microfluidics
Marco Costantini et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)
Coalescence in Two-Dimensional Foams: A Purely Statistical Process Dependent on Film Area
Emilie Forel et al.
PHYSICAL REVIEW LETTERS (2019)
Designable Polymeric Microparticles from Droplet Microfluidics for Controlled Drug Release
Fan He et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Tunable and Reversible Gelatin-Based Bonding for Microfluidic Cell Culture
Gabriele Pitingolo et al.
ADVANCED ENGINEERING MATERIALS (2019)
Highly Ordered Gelatin Methacryloyl Hydrogel Foams with Tunable Pore Size
Friederike Dehli et al.
BIOMACROMOLECULES (2019)
Influence of the Porosity of Polymer Foams on the Performances of Capacitive Flexible Pressure Sensors
Sylvie Bilent et al.
SENSORS (2019)
Monodisperse highly ordered chitosan/cellulose nanocomposite foams
Sebastien Andrieux et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Ultrasound transmission through monodisperse 2D microfoams
Lorene Champougny et al.
EUROPEAN PHYSICAL JOURNAL E (2019)
Engineering Human-Scale Artificial Bone Grafts for Treating Critical-Size Bone Defects
Alessandro Cianciosi et al.
ACS APPLIED BIO MATERIALS (2019)
Deposition kinetics of bi- and tridisperse colloidal suspensions in microchannels under the van der Waals regime
Cesare M. Cejas et al.
SOFT MATTER (2019)
Fabrication of biodegradable foams for deep tissue negative pressure treatments
Harleigh J. Warner et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2018)
Electric Field Assisted Microfluidic Platform for Generation of Tailorable Porous Microbeads as Cell Carriers for Tissue Engineering
Marco Costantini et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Liquid foam templating - A route to tailor-made polymer foams
Sebastien Andrieux et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2018)
Emulsion and Foam TemplatingPromising Routes to Tailor-Made Porous Polymers
Cosima Stubenrauch et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)
Generation of Solid Foams with Controlled Polydispersity Using Microfluidics
Sebastien Andrieux et al.
LANGMUIR (2018)
Wearable and flexible sensors for user-interactive health-monitoring devices
Minjeong Ha et al.
JOURNAL OF MATERIALS CHEMISTRY B (2018)
Beyond the on/off chip trade-off: A reversibly sealed microfluidic platform for 3D tumor microtissue analysis
Gabriele Pitingolo et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Multifunctional, Polyurethane-Based Foam Composites Reinforced by a Fabric Structure: Preparation, Mechanical, Acoustic, and EMI Shielding Properties
Hongyang Wang et al.
MATERIALS (2018)
Characterization of Different Chemical Blowing Agents and Their Applicability to Produce Poly(Lactic Acid) Foams by Extrusion
Akos Kmetty et al.
APPLIED SCIENCES-BASEL (2018)
PLA-Based Foams as Scaffolds for Tissue Engineering Applications
Luciana Sartore et al.
9TH INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS AND COMPOSITES: FROM AEROSPACE TO NANOTECHNOLOGY (2018)
3D bioactive composite scaffolds for bone tissue engineering
Gareth Turnbull et al.
BIOACTIVE MATERIALS (2018)
Polymer degradation and drug delivery in PLGA-based drug-polymer applications: A review of experiments and theories
Yihan Xu et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2017)
Biopolymer-based particles as stabilizing agents for emulsions and foams
Eric Dickinson
FOOD HYDROCOLLOIDS (2017)
Relationship between bulk foam stability, surfactant formulation and oil displacement efficiency in porous media
Kofi Osei-Bonsu et al.
FUEL (2017)
Extrusion assisted by supercritical CO2: A review on its application to biopolymers
Margot Chauvet et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2017)
Microfluidic-assisted fabrication of carriers for controlled drug delivery
Dongfei Liu et al.
LAB ON A CHIP (2017)
Highly ordered biobased scaffolds: From liquid to solid foams
Sebastien Andrieux et al.
POLYMER (2017)
Clogging of microfluidic systems
Emilie Dressaire et al.
SOFT MATTER (2017)
Non-aqueous foams: Current understanding on the formation and stability mechanisms
Anne-Laure Fameau et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2017)
An Approach Toward Numerical Investigation of the Mechanical Behavior of Ceramic Foams during Metal Melt Filtration Processes
Martin Abendroth et al.
ADVANCED ENGINEERING MATERIALS (2017)
Toward Functionally Graded Polymer Foams Using Microfluidics
Jonas Elsing et al.
ADVANCED ENGINEERING MATERIALS (2017)
Microfluidic-enhanced 3D bioprinting of aligned myoblast-laden hydrogels leads to functionally organized myofibers in vitro and in vivo
Marco Costantini et al.
BIOMATERIALS (2017)
The influence of the stabilizing agent SDS on porosity development in alkali-activated fly-ash based foams
L. Korat et al.
CEMENT & CONCRETE COMPOSITES (2017)
Aqueous foams and foam films stabilised by surfactants. Gravity-free studies
Dominique Langevin
COMPTES RENDUS MECANIQUE (2017)
Macroporous materials: microfluidic fabrication, functionalization and applications
Bingjie Wang et al.
CHEMICAL SOCIETY REVIEWS (2017)
Scaffolds and cells for tissue regeneration: different scaffold pore sizes-different cell effects
Ieva Bruzauskaite et al.
CYTOTECHNOLOGY (2016)
A review on the micro- and nanoporous polymeric foams: Preparation and properties
Elham Aram et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2016)
A review on the micro- and nanoporous polymeric foams: Preparation and properties
Elham Aram et al.
INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2016)
Confined Gelatin Dehydration as a Viable Route To Go Beyond Micromilling Resolution and Miniaturize Biological Assays
Raffaele Vecchione et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Comparison of antibacterial effects among three foams used with negative pressure wound therapy in an ex vivo equine perfused wound model
Lore L. Van Hecke et al.
AMERICAN JOURNAL OF VETERINARY RESEARCH (2016)
Morphology model for polymer foams formed by thermally induced phase separation
Michal Vonka et al.
CHEMICAL ENGINEERING JOURNAL (2016)
Correlation between porous texture and cell seeding efficiency of gas foaming and microfluidic foaming scaffolds
Marco Costantini et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
A Microfluidic Platform to design crosslinked Hyaluronic Acid Nanoparticles (cHANPs) for enhanced MRI
Maria Russo et al.
SCIENTIFIC REPORTS (2016)
Future Prospects for Scaffolding Methods and Biomaterials in Skin Tissue Engineering: A Review
Atul A. Chaudhari et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2016)
Microfluidic Foaming: A Powerful Tool for Tailoring the Morphological and Permeability Properties of Sponge-like Biopolymeric Scaffolds
Marco Costantini et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Monodisperse Polystyrene Foams via Microfluidics - A Novel Templating Route
Aggeliki Quell et al.
ADVANCED ENGINEERING MATERIALS (2015)
The science of foaming
Wiebke Drenckhan et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2015)
Using Surface Evolver to measure pressures and energies of real 2D foams submitted to quasi-static deformations
Marco Mancini et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2015)
Step-emulsification in a microfluidic device
Z. Li et al.
LAB ON A CHIP (2015)
Micromilling: a method for ultra-rapid prototyping of plastic microfluidic devices
David J. Guckenberger et al.
LAB ON A CHIP (2015)
A review: Fabrication of porous polyurethane scaffolds
H. Janik et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Stability Comparison Between Particles-Stabilized Foams and Polymer-Stabilized Foams
Dehu Wang et al.
JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY (2015)
Clogging by sieving in microchannels: Application to the detection of contaminants in colloidal suspensions
Alban Sauret et al.
APPLIED PHYSICS LETTERS (2014)
Thermodynamic and Mechanical Timescales Involved in Foam Film Rupture and Liquid Foam Coalescence
Emmanuelle Rio et al.
CHEMPHYSCHEM (2014)
Structural characterization of solid foams
Eric Maire et al.
COMPTES RENDUS PHYSIQUE (2014)
Rheology of aqueous foams
Benjamin Dollet et al.
COMPTES RENDUS PHYSIQUE (2014)
Microfluidic Study of Foams Flow for Enhanced Oil Recovery (EOR)
N. Quennouz et al.
OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES (2014)
Three-Dimensional Extracellular Matrix Scaffolds by Microfluidic Fabrication for Long-Term Spontaneously Contracted Cardiomyocyte Culture
Jeng-Chun Mei et al.
TISSUE ENGINEERING PART A (2014)
Role of polymer-surfactant interactions in foams: Effects of pH and surfactant head group for cationic polyvinylamine and anionic surfactants
R. Petkova et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2013)
The physical mechanisms of step emulsification
Remi Dangla et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2013)
From tubes to drops: droplet-based microfluidics for ultrahigh-throughput biology
T. M. Tran et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2013)
Morphological Comparison of PVA Scaffolds Obtained by Gas Foaming and Microfluidic Foaming Techniques
Cristina Colosi et al.
LANGMUIR (2013)
Cartilage regeneration in SCID mice using a highly organized three-dimensional alginate scaffold
Chen-Chie Wang et al.
BIOMATERIALS (2012)
Drug and Protein Encapsulation by Emulsification: Technology Enhancement Using Foam Formulations
Melvin X. L. Tan et al.
CHEMICAL ENGINEERING & TECHNOLOGY (2012)
Scaffold: A Novel Carrier for Cell and Drug Delivery
Tarun Garg et al.
CRITICAL REVIEWS IN THERAPEUTIC DRUG CARRIER SYSTEMS (2012)
Drug Delivery Properties of Macroporous Polystyrene Solid Foams
C. Canal et al.
JOURNAL OF PHARMACY AND PHARMACEUTICAL SCIENCES (2012)
Hydrodynamic cavitation: a bottom-up approach to liquid aeration
Janhavi S. Raut et al.
SOFT MATTER (2012)
PHBV/PLLA-based composite scaffolds fabricated using an emulsion freezing/freeze-drying technique for bone tissue engineering: surface modification and in vitro biological evaluation
Naznin Sultana et al.
BIOFABRICATION (2012)
Smart Foams: Switching Reversibly between Ultrastable and Unstable Foams
Anne-Laure Fameau et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)
Processing/Structure/Property Relationship of Multi-Scaled PCL and PCL-HA Composite Scaffolds Prepared via Gas Foaming and NaCl Reverse Templating
A. Salerno et al.
BIOTECHNOLOGY AND BIOENGINEERING (2011)
On the origin of the stability of foams made from catanionic surfactant mixtures
D. Varade et al.
SOFT MATTER (2011)
Polymeric Scaffolds in Tissue Engineering Application: A Review
Brahatheeswaran Dhandayuthapani et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2011)
Poly Lactic-co-Glycolic Acid (PLGA) as Biodegradable Controlled Drug Delivery Carrier
Hirenkumar K. Makadia et al.
POLYMERS (2011)
Effects of the architecture of tissue engineering scaffolds on cell seeding and culturing
Ferry P. W. Melchels et al.
ACTA BIOMATERIALIA (2010)
Foams for pharmaceutical and cosmetic application
A. Arzhavitina et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2010)
Dynamic foams in topical drug delivery
Yanjun Zhao et al.
JOURNAL OF PHARMACY AND PHARMACOLOGY (2010)
Dynamics of microfluidic droplets
Charles N. Baroud et al.
LAB ON A CHIP (2010)
Monodisperse Colloids Synthesized with Nanofluidic Technology
Florent Malloggi et al.
LANGMUIR (2010)
Highly Structured Foams from Chitosan Gels
A. Testouri et al.
MACROMOLECULES (2010)
Polymer Scaffolds for Biomaterials Applications
Molly S. Shoichet
MACROMOLECULES (2010)
Plasmonic Nanoshell Synthesis in Microfluidic Composite Foams
Suhanya Duraiswamy et al.
NANO LETTERS (2010)
Titanium foams for biomedical applications: a review
R. Singh et al.
MATERIALS TECHNOLOGY (2010)
Polysaccharide based scaffolds obtained by freezing the external phase of gas-in-liquid foams
Andrea Barbetta et al.
SOFT MATTER (2010)
Hydrogels in Regenerative Medicine
Brandon V. Slaughter et al.
ADVANCED MATERIALS (2009)
Fabricating scaffolds by microfluidics
Kuo-yuan Chung et al.
BIOMICROFLUIDICS (2009)
Highly structured porous solids from liquid foam templates
Antje van der Net et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2009)
The role of hydroxyapatite as solid signal on performance of PCL porous scaffolds for bone tissue regeneration
Vincenzo Guarino et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2008)
A new supercritical fluid-based process to produce scaffolds for tissue replacement
E. Reverchon et al.
JOURNAL OF SUPERCRITICAL FLUIDS (2008)
Design and manufacture of microporous polymeric materials with hierarchal complex structure for biomedical application
V. Guarino et al.
MATERIALS SCIENCE AND TECHNOLOGY (2008)
Stability of a jet in confined pressure-driven biphasic flows at low Reynolds number in various geometries
Pierre Guillot et al.
PHYSICAL REVIEW E (2008)
Synthesis of composite emulsions and complex foams with the use of microfluidic flow-focusing devices
Michinao Hashimoto et al.
SMALL (2007)
Poly(D,L-lactide) (PDLLA) foams with TiO2 nanoparticles and PDLLA/TiO2-Bioglass® foam composites for tissue engineering scaffolds
Aldo R. Boccaccini et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Chitosan scaffolds: Interconnective pore size and cartilage engineering
DJ Griffon et al.
ACTA BIOMATERIALIA (2006)
Rheology of liquid foam
R Höhler et al.
JOURNAL OF PHYSICS-CONDENSED MATTER (2005)
Rheology of ordered foams - on the way to Discrete Microfluidics
W Drenckhan et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2005)
Nonlinear dynamics of a flow-focusing bubble generator: An inverted dripping faucet
P Garstecki et al.
PHYSICAL REVIEW LETTERS (2005)
The effect of pore size on cell adhesion in collagen-GAG scaffolds
FJ O'Brien et al.
BIOMATERIALS (2005)
Porosity of 3D biomaterial scaffolds and osteogenesis
V Karageorgiou et al.
BIOMATERIALS (2005)
Structure and properties of nano-hydroxyapatite/polymer composite scaffolds for bone tissue engineering
GB Wei et al.
BIOMATERIALS (2004)
Grain size effects on the mechanical behavior of open-cell nickel foams
V Goussery et al.
ADVANCED ENGINEERING MATERIALS (2004)
Investigation of liquid flow in microchannels
D Liu et al.
JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2004)
Mechanical behavior of electrospun polyurethane
A Pedicini et al.
POLYMER (2003)
Fabrication and characterization of hydrophilic poly(lactic-co-glycolic acid)/poly(vinyl alcohol) blend cell scaffolds by melt-molding particulate-leaching method
SH Oh et al.
BIOMATERIALS (2003)
Advances in biomaterials, drug delivery, and bionanotechnology
R Langer et al.
AICHE JOURNAL (2003)
Recent research and development in titanium alloys for biomedical applications and healthcare goods
Mitsuo Niinomi
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2003)
Engineering cellular microenvironments to cell-based drug testing improve
K Bhadriraju et al.
DRUG DISCOVERY TODAY (2002)
Dynamics of coarsening foams: Accelerated and self-limiting drainage
S Hilgenfeldt et al.
PHYSICAL REVIEW LETTERS (2001)
Characterization of polymeric structural foams under compressive impact loading by means of energy-absorption diagram
M Avalle et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2001)
Biodegradable polymer scaffolds with well-defined interconnected spherical pore network
PX Ma et al.
TISSUE ENGINEERING (2001)
DepoFoam™ technology:: a vehicle for controlled delivery of protein and peptide drugs
Q Ye et al.
JOURNAL OF CONTROLLED RELEASE (2000)
Review: tissue engineering for regeneration of articular cartilage
JS Temenoff et al.
BIOMATERIALS (2000)