Related references
Note: Only part of the references are listed.Ultrasonic additive manufacturing of steel: Method, post-processing treatments and properties
Asaf Levy et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Evaluation of microstructure stability at the interfaces of Al-6061 welds fabricated using ultrasonic additive manufacturing
Niyanth Sridharan et al.
MATERIALS CHARACTERIZATION (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Junction growth in ultrasonic spot welding and ultrasonic additive manufacturing
Austin A. Ward et al.
ACTA MATERIALIA (2018)
Microstructure, Fatigue Behavior, and Failure Mechanisms of Direct Laser-Deposited Inconel 718
Alex S. Johnson et al.
JOM (2017)
Microstructure and mechanical property characterisation of aluminium-steel joints fabricated using ultrasonic additive manufacturing
Niyanth Sridharan et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2017)
Multiaxial fatigue behavior of wrought and additive manufactured Ti-6Al-4V including surface finish effect
Ali Fatemi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Fatigue performance of additive manufactured TiAl6V4 using electron and laser beam melting
Daniel Greitemeier et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Effect of post weld heat treatment on the 6061 aluminum alloy produced by ultrasonic additive manufacturing
M. N. Gussev et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
High-strain-rate deformation in ultrasonic additive manufacturing
Hiromichi T. Fujii et al.
SCRIPTA MATERIALIA (2017)
Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing
Yen-Ling Kuo et al.
SCRIPTA MATERIALIA (2017)
Dynamical fatigue behavior of additive manufactured products for a fundamental life cycle approach
Eckart Uhlmann et al.
24TH CIRP CONFERENCE ON LIFE CYCLE ENGINEERING (2017)
Ultrasonic Welding of Bi-Metals: Optimizing Process Parameters for Maximum Tensile-Shear Strength and Plasticity of Welds
Urfi Khan et al.
PLASTICITY AND IMPACT MECHANICS (2017)
Rationalization of anisotropic mechanical properties of Al-6061 fabricated using ultrasonic additive manufacturing
Niyanth Sridharan et al.
ACTA MATERIALIA (2016)
Interface evolution and shear strength of Al/Ti bi-metals processed by a spark plasma sintering (SPS) apparatus
Aslan Miriyev et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Dissimilar ultrasonic spot welding of aerospace aluminum alloy AA2139 to titanium alloy TiAl6V4
C. Q. Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Superior creep strength of a nickel-based superalloy produced by selective laser melting
M. Proebstle et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Fatigue behavior and failure mechanisms of direct laser deposited Ti-6Al-4V
Amanda J. Sterling et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Characterisation of Al-Ti dissimilar material joints fabricated using ultrasonic additive manufacturing
P. J. Wolcott et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2016)
Effect of ultrasonic nanocrystalline surface modification on the water droplet erosion performance of Ti-6Al-4V
Abdullahi K. Gujba et al.
SURFACE & COATINGS TECHNOLOGY (2016)
Influence of build direction on the fatigue behaviour of Ti6Al4V alloy produced by direct metal laser sintering
Adrian Baca et al.
MATERIALS TODAY-PROCEEDINGS (2016)
Solid-state additive manufacturing for metallized optical fiber integration
T. Monaghan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Interfacial shear strength estimates of NiTi-Al matrix composites fabricated via ultrasonic additive manufacturing
Adam Hehr et al.
COMPOSITES PART B-ENGINEERING (2015)
Exploring the mechanical strength of additively manufactured metal structures with embedded electrical materials
J. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Texture, anisotropy in microstructure and mechanical properties of IN738LC alloy processed by selective laser melting (SLM)
Karsten Kunze et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Mechanical properties and microstructure of Al/Al laminated structure produced via ultrasonic consolidation process
X. -H. He et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
Effect of microstructure and defects on fatigue behaviour of directed energy deposited Ti-6Al-4V
A. W. Prabhu et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2015)
Mechanical Alloying and Spark Plasma Sintering of Nano-SiC Reinforced Al-12Si-0.3Mg Alloy
Kachalla Abdullahi et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2014)
NiTi-Al interface strength in ultrasonic additive manufacturing composites
Ryan Hahnlen et al.
COMPOSITES PART B-ENGINEERING (2014)
Energy and bond strength development during ultrasonic consolidation
Gregory S. Kelly et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Microstructural characterization and mechanical properties of high power ultrasonic spot welded aluminum alloy AA6111-TiAl6V4 dissimilar joints
C. Q. Zhang et al.
MATERIALS CHARACTERIZATION (2014)
Laser Peening Process and Its Impact on Materials Properties in Comparison with Shot Peening and Ultrasonic Impact Peening
Abdullahi K. Gujba et al.
MATERIALS (2014)
A model to characterize acoustic softening during ultrasonic consolidation
Gregory S. Kelly et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
In-situ scanning electron microscopy studies of small fatigue crack growth in ultrasonic consolidation bonded aluminum 2024 laminated structure
Xiao-Hua He et al.
MATERIALS LETTERS (2013)
Synthesis, characterisation and mechanical properties of SiC reinforced Al based nanocomposites processed by MA and SPS
N. Al-Aqeeli et al.
POWDER METALLURGY (2013)
High temperature material properties of IN738LC processed by selective laser melting (SLM) technology
L. Rickenbacher et al.
RAPID PROTOTYPING JOURNAL (2013)
Fatigue performance of additive manufactured metallic parts
A. B. Spierings et al.
RAPID PROTOTYPING JOURNAL (2013)
Optimizing Ultrasonic Additive Manufactured Al 3003 Properties With Statistical Modeling
C. D. Hopkins et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2012)
Thermal Transients During Processing of 3003 Al-H18 Multilayer Build by Very High-Power Ultrasonic Additive Manufacturing
M. R. Sriraman et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2012)
Effects of ARB and ageing processes on mechanical properties and microstructure of 6061 aluminum alloy
Mohammad Reza Rezaei et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Optimization of the shear strengths of ultrasonically consolidated Ti/Al 3003 dual-material structures
J. O. Obielodan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Quantitative Evaluation of Bulk and Interface Microstructures in Al-3003 Alloy Builds Made by Very High Power Ultrasonic Additive Manufacturing
Hiromichi T. Fujii et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Microwave versus conventional sintering: A review of fundamentals, advantages and applications
Morteza Oghbaei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Effects of Ultrasonic Nanocrystal Surface Modification (UNSM) on Residual Stress State and Fatigue Strength of AISI 304
A. Cherif et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2010)
Mechanisms of joint and microstructure formation in high power ultrasonic spot welding 6111 aluminium automotive sheet
D. Bakavos et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
The effect of interface topography for Ultrasonic Consolidation of aluminium
R. J. Friel et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Improvement of fatigue life of Ti-6Al-4V alloy by laser shock peening
X. C. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
A nanometre-scale fibre-to-matrix interface characterization of an ultrasonically consolidated metal matrix composite
R. J. Friel et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2010)
An analytical energy model for metal foil deposition in ultrasonic consolidation
Yanzhe Yang et al.
RAPID PROTOTYPING JOURNAL (2010)
Bonding characteristics during very high power ultrasonic additive manufacturing of copper
M. R. Sriraman et al.
SCRIPTA MATERIALIA (2010)
Fatigue and fracture behavior of nickel-based superalloy Inconel 718 up to the very high cycle regime
Xian-feng Ma et al.
JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A (2010)
Characterization of Process for Embedding SiC Fibers in Al 6061 O Matrix Through Ultrasonic Consolidation
Dezhi Li et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2009)
A Method for Bond Strength Evaluation for Laminated Structures with Application to Ultrasonic Consolidation
Chunbo (Sam) Zhang et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2009)
Influence of sonotrode texture on the performance of an ultrasonic consolidation machine and the interfacial bond strength
Dezhi Li et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Bond formation and fiber embedment during ultrasonic consolidation
Y. Yang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Plastic flow and work hardening of Al alloy matrices during ultrasonic consolidation fibre embedding process
Dezhi Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
An experimental determination of optimum processing parameters for Al/SiC metal matrix composites made using ultrasonic consolidation
Y. Yang et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2007)
A model for weld strength in ultrasonically consolidated components
CY Kong et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2005)
Optimum process parameters for ultrasonic consolidation of 3003 aluminium
CY Kong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
The influence of surface enhancement by low plasticity burnishing on the corrosion fatigue performance of AA7075-T6
PS Prevéy et al.
INTERNATIONAL JOURNAL OF FATIGUE (2004)
Ultrasonic consolidation for embedding SMA fibres within aluminium matrices
CY Kong et al.
COMPOSITE STRUCTURES (2004)
Characterisation of aluminium alloy 6061 for the ultrasonic consolidation process
CY Kong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)