Related references
Note: Only part of the references are listed.Estimating Powder-Polymer Material Properties Used in Design for Metal Fused Filament Fabrication (DfMF3)
Paramjot Singh et al.
JOM (2020)
Evolution of porosity and geometrical quality through the ceramic extrusion additive manufacturing process stages
Kedarnath Rane et al.
ADDITIVE MANUFACTURING (2020)
Investigating the effect of fabrication temperature on mechanical properties of fused deposition modeling parts using X-ray computed tomography
Amir Reza Zekavat et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Impact of processing parameters on tensile strength, in-process crystallinity and mesostructure in FDM-fabricated PLA specimens
Ognjan Luzanin et al.
RAPID PROTOTYPING JOURNAL (2019)
Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components
Walter Lengauer et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2019)
Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing
Joamin Gonzalez-Gutierrez et al.
MATERIALS LETTERS (2019)
Process porosity and mechanical performance of fused filament fabricated 316L stainless steel
James Damon et al.
RAPID PROTOTYPING JOURNAL (2019)
Analysis of tensile strength of a fused filament fabricated PLA part using an open-source 3D printer
Shilpesh R. Rajpurohit et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Fused Filament Fabrication (FFF) of Metal-Ceramic Components
Johannes Abel et al.
JOVE-JOURNAL OF VISUALIZED EXPERIMENTS (2019)
Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel
Yvonne Thompson et al.
ADDITIVE MANUFACTURING (2019)
Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation
Santiago Cano et al.
ADDITIVE MANUFACTURING (2019)
The microstructure and mechanical properties of 3D printed carbon nanotube-polylactic acid composites
Huseini S. Patanwala et al.
POLYMER COMPOSITES (2018)
The effects of voids on structural properties of fused deposition modelled parts: a probabilistic approach
Sigmund A. Tronvoll et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Traditional and additive manufacturing of a new Tungsten heavy alloy alternative
Animesh Bose et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2018)
Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives
Joamin Gonzalez-Gutierrez et al.
MATERIALS (2018)
Fused Filament Fabrication of Small Ceramic Components
Dorit Noetzel et al.
MATERIALS (2018)
Material Properties and Shrinkage of 3D Printing Parts using Ultrafuse Stainless Steel 316LX Filament
Haijun Gong et al.
2018 5TH INTERNATIONAL CONFERENCE ON MECHANICAL, MATERIALS AND MANUFACTURING (ICMMM 2018) (2018)
Thermal conductivity of sintered copper samples prepared using 3D printing-compatible polymer composite filaments
Navid Dehdari Ebrahimi et al.
ADDITIVE MANUFACTURING (2018)
Nozzle clogging factors during fused filament fabrication of spherical particle filled polymers
Tobias Beran et al.
ADDITIVE MANUFACTURING (2018)
Experimental study on the 3D-printed plastic parts and predicting the mechanical properties using artificial neural networks
Omer Bayraktar et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2017)
Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)
Martin Spoerk et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing
Martin Spoerk et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection
J. M. Chacon et al.
MATERIALS & DESIGN (2017)
Experimental Optimization of Fused Deposition Modelling Processing Parameters: a Design-for-Manufacturing Approach
Ala'aldin Alafaghani et al.
45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45) (2017)
An approach for mechanical property optimization of fused deposition modeling with polylactic acid via design of experiments
Jonathan Torres et al.
RAPID PROTOTYPING JOURNAL (2016)
Investigating the influence of infill percentage on the mechanical properties of fused deposition modelled ABS parts
Kenny L. Alvarez C et al.
INGENIERIA E INVESTIGACION (2016)
Finishing of Fused Deposition Modeling parts by CNC machining
Alberto Boschetto et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2016)
Investigating the influence of infill percentage on the mechanical properties of fused deposition modelled ABS parts
Kenny L. Alvarez C et al.
INGENIERIA E INVESTIGACION (2016)
Effectiveness of wick-debinding inside powder bed for ceramic laminates made by tape casting
Lovro Gorjan et al.
POWDER TECHNOLOGY (2015)
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
Andrea Zocca et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2015)
Microstructural characterization and mechanical properties of Si(3)N(4) formed by fused deposition of ceramics
S. Iyer et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2008)
Fused deposition modelling using direct extrusion
B. V. Reddy et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2007)
Application of fused deposition in controlled microstructure metal-ceramic composites
Amit Bandyopadhyay et al.
RAPID PROTOTYPING JOURNAL (2006)
Solid freeform fabrication of metal components using fused deposition of metals
GH Wu et al.
MATERIALS & DESIGN (2002)
Processing of advanced electroceramic components by fused deposition technique
M Allahverdi et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2001)
Share Paper
