Related references
Note: Only part of the references are listed.A brief overview on synthesis and applications of graphene and graphene-based nanomaterials
Maria Coros et al.
FRONTIERS OF MATERIALS SCIENCE (2019)
Printing Conductive Nanomaterials for Flexible and Stretchable Electronics: A Review of Materials, Processes, and Applications
Qijin Huang et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Biocompatible Conductive Polymers with High Conductivity and High Stretchability
Hao He et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
A review of aerosol jet printing-a non-traditional hybrid process for micro-manufacturing
N. J. Wilkinson et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Combined Chemical and Thermal Sintering for High Conductivity Inkjet-printed Silver Nanoink on Flexible Substrates
I. Ivanisevic et al.
CHEMICAL AND BIOCHEMICAL ENGINEERING QUARTERLY (2019)
Improvement of the evaluation of inkjet printed silver based layers' adhesion
Peter Lukacs et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2019)
Inkjet-printed PEDOT:PSS multi-electrode arrays for low-cost in vitro electrophysiology
Leonardo D. Garma et al.
LAB ON A CHIP (2019)
Functional inks and printing of two-dimensional materials
Guohua Hu et al.
CHEMICAL SOCIETY REVIEWS (2018)
Inkjet Printing of Epidermal RFID Antennas by Self-Sintering Conductive Ink
S. Amendola et al.
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES (2018)
Inkjet printing metals on flexible materials for plastic and paper electronics
N. C. Raut et al.
JOURNAL OF MATERIALS CHEMISTRY C (2018)
Inkjet printing and UV-LED curing of photochromic dyes for functional and smart textile applications
Sina Seipel et al.
RSC ADVANCES (2018)
Aerosol Jet Printed 3D Electrochemical Sensors for Protein Detection
Edoardo Cantu et al.
SENSORS (2018)
Inkjet Printing of Silver Nanowires for Stretchable Heaters
Qijin Huang et al.
ACS APPLIED NANO MATERIALS (2018)
In-Plane Deformation Mechanics for Highly Stretchable Electronics
Yewang Su et al.
ADVANCED MATERIALS (2017)
Chemical sintering of direct-written silver nanowire flexible electrodes under room temperature
Zhuang Hui et al.
NANOTECHNOLOGY (2017)
Water-based and biocompatible 2D crystal inks for all-inkjet-printed heterostructures
Daryl McManus et al.
NATURE NANOTECHNOLOGY (2017)
Mechanical properties of graphene and graphene-based nanocomposites
Dimitrios G. Papageorgiou et al.
PROGRESS IN MATERIALS SCIENCE (2017)
Porosity reduction in inkjet-printed copper film by progressive sintering on nanoparticles
Hui-Ju Chan et al.
THIN SOLID FILMS (2017)
Inkjet printing wearable electronic devices
Meng Gao et al.
JOURNAL OF MATERIALS CHEMISTRY C (2017)
3D inkjet-printed UV-curable inks for multi-functional electromagnetic applications
Ehab Saleh et al.
ADDITIVE MANUFACTURING (2017)
Laser textured surface gradients
Van Duong Ta et al.
APPLIED SURFACE SCIENCE (2016)
Laser textured superhydrophobic surfaces and their applications for homogeneous spot deposition
Van Duong Ta et al.
APPLIED SURFACE SCIENCE (2016)
Inkjet Printing of Functional Materials for Optical and Photonic Applications
Jorge Alaman et al.
MATERIALS (2016)
Dispensing of high concentration Ag nano-particles ink for ultra-low resistivity paper-based writing electronics
Fuliang Wang et al.
SCIENTIFIC REPORTS (2016)
Inkjet-printed flexible, transparent and aesthetic energy storage devices based on PEDOT: PSS/Ag grid electrodes
Tao Cheng et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Fully High-Speed Gravure Printed, Low-Variability, High-Performance Organic Polymer Transistors with Sub-5 V Operation
Gerd Grau et al.
ADVANCED ELECTRONIC MATERIALS (2016)
Silver Ink Formulations for Sinter-free Printing of Conductive Films
Kate Black et al.
SCIENTIFIC REPORTS (2016)
Inkjet-Printed Graphene/PEDOT:PSS Temperature Sensors on a Skin-Conformable Polyurethane Substrate
Tiina Vuorinen et al.
SCIENTIFIC REPORTS (2016)
Poly(4-vinylphenol) gate insulator with cross-linking using a rapid low-power microwave induction heating scheme for organic thin-film-transistors
Ching-Lin Fan et al.
APL MATERIALS (2016)
Inkjet Printing of Silver Nanowire Networks
David J. Finn et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Nanosecond laser textured superhydrophobic metallic surfaces and their chemical sensing applications
Duong V. Ta et al.
APPLIED SURFACE SCIENCE (2015)
State-of-the-Art Inkjet-Printed Metal-Insulator-Metal (MIM) Capacitors on Silicon Substrate
Chiara Mariotti et al.
IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS (2015)
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Saleem Khan et al.
IEEE SENSORS JOURNAL (2015)
Additive Manufacturing Technologies Compared: Morphology of Deposits of Silver Ink Using Inkjet and Aerosol Jet Printing
Tobias Seifert et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)
Inkjet-printed microelectrodes on PDMS as biosensors for functionalized microfluidic systems
Jianwei Wu et al.
LAB ON A CHIP (2015)
Inkjet printing of upconversion nanoparticles for anti-counterfeit applications
Minli You et al.
NANOSCALE (2015)
Inkjet-printed copper electrodes using photonic sintering and their application to organic thin-film transistors
Shohei Norita et al.
ORGANIC ELECTRONICS (2015)
Electrically conductive polymers and composites for biomedical applications
Gagan Kaur et al.
RSC ADVANCES (2015)
Wearable Electronics of Silver-Nanowire/Poly(dimethylsiloxane) Nanocomposite for Smart Clothing
Gui-Wen Huang et al.
SCIENTIFIC REPORTS (2015)
Inkjet Printed Conductive Tracks for Printed Electronics
S. -P. Chen et al.
ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2015)
Fully Inkjet-Printed Transparent Oxide Thin Film Transistors Using a Fugitive Wettability Switch
Jaewon Jang et al.
ADVANCED ELECTRONIC MATERIALS (2015)
Comparison of laser and intense pulsed light sintering (IPL) for inkjet-printed copper nanoparticle layers
Juha Niittynen et al.
SCIENTIFIC REPORTS (2015)
Inkjet-printed silver tracks on different paper substrates
T-H Joubert et al.
MATERIALS TODAY-PROCEEDINGS (2015)
Copper conductive inks: synthesis and utilization in flexible electronics
Venkata K. Abhinav et al.
RSC ADVANCES (2015)
Patterned Surface with Controllable Wettability for Inkjet Printing of Flexible Printed Electronics
Phuong Q. M. Nguyen et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Polydimethylsiloxane material as hydrophobic and insulating layer in electrowetting-on-dielectric systems
D. Caputo et al.
MICROELECTRONICS JOURNAL (2014)
Conductive Nanomaterials for Printed Electronics
Alexander Kamyshny et al.
SMALL (2014)
Alternative sintering methods compared to conventional thermal sintering for inkjet printed silver nanoparticle ink
Juha Niittynen et al.
THIN SOLID FILMS (2014)
Characterization of Laser Sintering of Copper Nanoparticle Ink by FEM and Experimental Testing
Juha Niittynen et al.
IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY (2014)
Highly Conductive, Flexible, Polyurethane-Based Adhesives for Flexible and Printed Electronics
Zhuo Li et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
A Stretchable RF Antenna With Silver Nanowires
Tanminder Rai et al.
IEEE ELECTRON DEVICE LETTERS (2013)
Novel approaches for low temperature sintering of inkjet-printed inorganic nanoparticles for roll-to-roll (R2R) applications
Jolke Perelaer et al.
JOURNAL OF MATERIALS RESEARCH (2013)
Aerosol Jet Printed, Low Voltage, Electrolyte Gated Carbon Nanotube Ring Oscillators with Sub-5 μs Stage Delays
Mingjing Ha et al.
NANO LETTERS (2013)
Inkjet-Printed Graphene Electronics
Felice Torrisi et al.
ACS NANO (2012)
Highly Conductive and Stretchable Silver Nanowire Conductors
Feng Xu et al.
ADVANCED MATERIALS (2012)
Roll-to-Roll Compatible Sintering of Inkjet Printed Features by Photonic and Microwave Exposure: From Non-Conductive Ink to 40% Bulk Silver Conductivity in Less Than 15 Seconds
Jolke Perelaer et al.
ADVANCED MATERIALS (2012)
Inkjet printing of conductive materials: a review
Gerard Cummins et al.
CIRCUIT WORLD (2012)
All-inkjet-printed Metal-Insulator-Metal (MIM) capacitor
Jongwoo Lim et al.
CURRENT APPLIED PHYSICS (2012)
Zero-dimensional, one-dimensional, two-dimensional and three-dimensional nanostructured materials for advanced electrochemical energy devices
Jitendra N. Tiwari et al.
PROGRESS IN MATERIALS SCIENCE (2012)
Reactive Sintering of Copper Nanoparticles Using Intense Pulsed Light for Printed Electronics
Jongeun Ryu et al.
JOURNAL OF ELECTRONIC MATERIALS (2011)
Substrates for Flexible Electronics: A Practical Investigation on the Electrical, Film Flexibility, Optical, Temperature, and Solvent Resistance Properties
Valerio Zardetto et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2011)
Graphene-based conducting inks for direct inkjet printing of flexible conductive patterns and their applications in electric circuits and chemical sensors
Lu Huang et al.
NANO RESEARCH (2011)
Triggering the Sintering of Silver Nanoparticles at Room Temperature
Shlomo Magdassi et al.
ACS NANO (2010)
Fabrication of Terahertz Planar Metamaterials Using a Super-Fine Ink-Jet Printer
Keisuke Takano et al.
APPLIED PHYSICS EXPRESS (2010)
Characterization, purification, and stability of gold nanoparticles
Suresh K. Balasubramanian et al.
BIOMATERIALS (2010)
Inkjet Printing of Conductive Silver Patterns by Using the First Aqueous Particle-Free MOD Ink without Additional Stabilizing Ligands
Stephan F. Jahn et al.
CHEMISTRY OF MATERIALS (2010)
Highly Efficient Inkjet-Printed Organic Photovoltaic Cells
Jaewook Jung et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2010)
Room temperature preparation of conductive silver features using spin-coating and inkjet printing
Josue J. P. Valeton et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials
Jolke Perelaer et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Inkjet printed electronics using copper nanoparticle ink
Jin Sung Kang et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2010)
Adhesion mechanisms of nanoparticle silver to substrate materials: identification
Sungchul Joo et al.
NANOTECHNOLOGY (2010)
Microwave Flash Sintering of Inkjet-Printed Silver Tracks on Polymer Substrates
Jolke Perelaer et al.
ADVANCED MATERIALS (2009)
Intense pulsed light sintering of copper nanoink for printed electronics
Hak-Sung Kim et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2009)
Conductive copper and nickel lines via reactive inkjet printing
Dapeng Li et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
A super ink jet printed zinc-silver 3D microbattery
C. C. Ho et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
Self-patterning of fine metal electrodes by means of the formation of isolated silver nanoclusters embedded in polyaniline
Dong-Youn Shin et al.
NANOTECHNOLOGY (2009)
Polymer solar cells based on inkjet-printed PEDOT:PSS layer
Seung Hun Eom et al.
ORGANIC ELECTRONICS (2009)
Inkjet-printed silver tracks: low temperature curing and thermal stability investigation
Jolke Perelaer et al.
JOURNAL OF MATERIALS CHEMISTRY (2008)
Silver inkjet printing with control of surface energy and substrate temperature
S-H Lee et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2008)
Inkjet-printed line morphologies and temperature control of the coffee ring effect
Dan Soltman et al.
LANGMUIR (2008)
Printing highly efficient organic solar cells
Claudia N. Hoth et al.
NANO LETTERS (2008)
High photovoltaic performance of inkjet printed polymer: Fullerene blends
Claudia N. Hoth et al.
ADVANCED MATERIALS (2007)
Direct ink-jet printing of Ag-Cu nanoparticle and Ag-precursor based electrodes for OFET applications
Stefan Gamerith et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Metal aerosol jet printing for solar cell metallization
A. Mette et al.
PROGRESS IN PHOTOVOLTAICS (2007)
All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles
Seung H. Ko et al.
NANOTECHNOLOGY (2007)
Precision ink jet printing of polymer light emitting displays
J. F. Dijksman et al.
JOURNAL OF MATERIALS CHEMISTRY (2007)
Modeling of microwave heating of particulate metals
P. Mishra et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2006)
Ink-jet printing and microwave sintering of conductive silver tracks
Jolke Perelaer et al.
ADVANCED MATERIALS (2006)
Graphene-based composite materials
Sasha Stankovich et al.
NATURE (2006)
A low Curing temperature silver ink for use in ink-jet printing and subsequent production of conductive tracks
AL Dearden et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2005)
Conductor microstructures by laser curing of printed gold nanoparticle ink
JW Chung et al.
APPLIED PHYSICS LETTERS (2004)
In-tandem deposition and sintering of printed gold nanoparticle inks induced by continuous Gaussian laser irradiation
J Chung et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2004)
Plastic-compatible low resistance printable gold nanoparticle conductors for flexible electronics
D Huang et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)
High-mobility polymer gate dielectric pentacene thin film transistors
H Klauk et al.
JOURNAL OF APPLIED PHYSICS (2002)
Hemocompatibility, biocompatibility, inflammatory and in vivo studies of primary reference materials low-density polyethylene and polydimethylsiloxane:: A review
MC Bélanger et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2001)