Related references
Note: Only part of the references are listed.Evolution of flax cell wall ultrastructure and mechanical properties during the retting step
Alain Bourmaud et al.
CARBOHYDRATE POLYMERS (2019)
Damage Kinetics at the Sub-micrometric Scale in Bast Fibers Using Finite Element Simulation and High-Resolution X-Ray Micro-Tomography
Sofiane Guessasma et al.
FRONTIERS IN PLANT SCIENCE (2019)
Beating of hemp bast fibres: an examination of a hydro-mechanical treatment on chemical, structural, and nanomechanical property evolutions
Justine Padovani et al.
CELLULOSE (2019)
Main criteria of sustainable natural fibre for efficient unidirectional biocomposites
Alain Bourmaud et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Micromechanical properties of wood cell wall and interface compound middle lamella using quasi-static nanoindentation and dynamic modulus mapping
Lizhe Qin et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Polypropylene reinforcement with flax or jute fibre; Influence of microstructure and constituents properties on the performance of composite
Morgane Tanguy et al.
COMPOSITES PART B-ENGINEERING (2018)
Monitoring temperature effects on flax cell-wall mechanical properties within a composite material using AFM
David Siniscalco et al.
POLYMER TESTING (2018)
Towards the design of high-performance plant fibre composites
Alain Bourmaud et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Mechanical properties of leaf sheath date palm fibre waste biomass reinforced polycaprolactone (PCL) biocomposites
Hom Dhakal et al.
INDUSTRIAL CROPS AND PRODUCTS (2018)
Influence of hemicelluloses and lignin content on structure and sorption properties of flax fibers (Linum usitatissimum L.)
Biljana D. Lazic et al.
CELLULOSE (2018)
Investigation of the Mechanical Properties of Flax Cell Walls during Plant Development: The Relation between Performance and Cell Wall Structure
Camille Goudenhooft et al.
FIBERS (2018)
Better insight into the nano-mechanical properties of flax fibre cell walls
Olivier Arnould et al.
INDUSTRIAL CROPS AND PRODUCTS (2017)
Multi-scale modelling of elastic properties of balsa
Sardar Malek et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)
Damage mechanisms in defected natural fibers
Johnny Beaugrand et al.
SCIENTIFIC REPORTS (2017)
Bioinspired lignocellulosic films to understand the mechanical properties of lignified plant cell walls at nanoscale
L. Muraille et al.
SCIENTIFIC REPORTS (2017)
Exploring the potential of waste leaf sheath date palm fibres for composite reinforcement through a structural and mechanical analysis
Alain Bourmaud et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Lignocellulosic fiber breakage in a molten polymer. Part 3. Modeling of the dimensional change of the fibers during compounding by twin screw extrusion
F. Berzin et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Flax fibers: assessing the non-cellulosic polysaccharides and an approach to supramolecular design of the cell wall
Christophe Rihouey et al.
CELLULOSE (2017)
Functional gradients in the pericarp of the green coconut inspire asymmetric fibre-composites with improved impact strength, and preserved flexural and tensile properties
Nina Graupner et al.
BIOINSPIRATION & BIOMIMETICS (2017)
The middle lamella-more than a glue
M. S. Zamil et al.
PHYSICAL BIOLOGY (2017)
Why are designers fascinated by flax and hemp fibre composites?
Lut Pil et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Mechanical behaviour and damage mechanisms analysis of a flax-fibre reinforced composite by acoustic emission
Arthur Monti et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Mechanical and acoustic behaviour of porosity controlled randomly dispersed flax/PP biocomposite
Justin Merotte et al.
POLYMER TESTING (2016)
Towards a better understanding of wood cell wall characterisation with contact resonance atomic force microscopy
O. Arnould et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Mechanical imaging of bamboo fiber cell walls and their composites by means of peakforce quantitative nanomechanics (PQNM) technique
Dan Ren et al.
HOLZFORSCHUNG (2015)
Influence of the morphology characters of the stem on the lodging resistance of Marylin flax
Alain Bourmaud et al.
INDUSTRIAL CROPS AND PRODUCTS (2015)
How to let go: pectin and plant cell adhesion
Firas Bou Daher et al.
FRONTIERS IN PLANT SCIENCE (2015)
Flax/polypropylene composites for lightened structures: Multiscale analysis of process and fibre parameters
Awa S. Doumbia et al.
MATERIALS & DESIGN (2015)
MECHANICAL CHARACTERIZATION OF OUTER EPIDERMAL MIDDLE LAMELLA OF ONION UNDER TENSILE LOADING
M. Shafayet Zamil et al.
AMERICAN JOURNAL OF BOTANY (2014)
Kenaf bast cellulosic fibers hierarchy: A comprehensive approach from micro to nano
Samaneh Karimi et al.
CARBOHYDRATE POLYMERS (2014)
Improvement and analysis of fibre/matrix adhesion of regenerated cellulose fibre reinforced PP-, MAPP- and PLA-composites by the use of Eucalyptus globulus lignin
Nina Graupner et al.
COMPOSITES PART B-ENGINEERING (2014)
Chemical and ultrastructural changes in compound middle lamella (CML) regions of softwoods thermally modified by the Termovuoto process
Jie Gao et al.
HOLZFORSCHUNG (2014)
Interfaces within flax fibre bundle: Experimental characterization and numerical modelling
Karine Charlet et al.
JOURNAL OF COMPOSITE MATERIALS (2014)
Effect of flax fibres individualisation on tensile failure of flax/epoxy unidirectional composite
Guillaume Coroller et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Analysis of the hemp fiber mechanical properties and their scattering (Fedora 17)
L. Marrot et al.
INDUSTRIAL CROPS AND PRODUCTS (2013)
Observation of the structure of a composite polypropylene/flax and damage mechanisms under stress
A. Bourmaud et al.
INDUSTRIAL CROPS AND PRODUCTS (2013)
Characterization of date palm lignocellulosic by-products and self-bonded composite materials obtained thereof
Nabila Saadaoui et al.
MATERIALS & DESIGN (2013)
Experimental micromechanical characterisation of wood cell walls
Michaela Eder et al.
WOOD SCIENCE AND TECHNOLOGY (2013)
Improvement in mechanical properties of jute fibres through mild alkali treatment as demonstrated by utilisation of the Weibull distribution model
Aparna Roy et al.
BIORESOURCE TECHNOLOGY (2012)
Pectinase treatments on technical fibres of flax: Effects on water sorption and mechanical properties
S. Alix et al.
CARBOHYDRATE POLYMERS (2012)
Improving the interfacial properties between flax fibres and PLLA by a water fibre treatment and drying cycle
Antoine le Duigou et al.
INDUSTRIAL CROPS AND PRODUCTS (2012)
Deformation of the compound middle lamella in spruce latewood by micro-pillar compression of double cell walls
Rejin Raghavan et al.
JOURNAL OF MATERIALS SCIENCE (2012)
A secondary phloic (bast) fibre-shy (bfs) mutant of dark jute (Corchorus olitorius L.) develops lignified fibre cells but is defective in cambial activity
Avijit Kundu et al.
PLANT GROWTH REGULATION (2012)
Review of Natural Fibers. Part I-Vegetable Fibers
Anna Kicinska-Jakubowska et al.
JOURNAL OF NATURAL FIBERS (2012)
Gwyddion: an open-source software for SPM data analysis
David Necas et al.
CENTRAL EUROPEAN JOURNAL OF PHYSICS (2012)
Polypropylene/natural fibres composites: Analysis of fibre dimensions after compounding and observations of fibre rupture by rheo-optics
Anne Le Duc et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
The relation between indentation modulus, microfibril angle, and elastic properties of wood cell walls
A. Jaeger et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Influence of the sampling area of the stem on the mechanical properties of hemp fibers
Antoine Duval et al.
MATERIALS LETTERS (2011)
Effect of different extraction methods on fiber quality of nettle (Urtica dioica L.)
Laura Bacci et al.
TEXTILE RESEARCH JOURNAL (2011)
Cell wall ultrastructure, anatomy, lignin distribution, and chemical composition of Malaysian cultivated kenaf fiber
H. P. S. Abdul Khalil et al.
INDUSTRIAL CROPS AND PRODUCTS (2010)
Nanoindentation near the edge
J. E. Jakes et al.
JOURNAL OF MATERIALS RESEARCH (2009)
Mapping the elastic properties of granular Au films by contact resonance atomic force microscopy
G. Stan et al.
NANOTECHNOLOGY (2008)
An experimental investigation of deformation and fracture of nacre-mother of pearl
F. Barthelat et al.
EXPERIMENTAL MECHANICS (2007)
Carbohydrate components and crystalline structure of organosolv hemp (Cannabis sativa L.) bast fibers pulp
Esat Gumuskaya et al.
BIORESOURCE TECHNOLOGY (2007)
Transverse tensile behaviour of unidirectional plies reinforced with flax fibres
Christophe Baley et al.
MATERIALS LETTERS (2006)
Chemical and morphological characteristics of Malaysian cultivated kenaf (Hibiscus cannabinus) fiber
A Ashori et al.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2006)
Structure and chemical composition of bast fibers isolated from developing hemp stem
D Crônier et al.
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2005)
Lignification in the flax stem:: evidence for an unusual lignin in bast fibers
A Day et al.
PLANTA (2005)
Formation of macromolecular lignin in ginkgo xylem cell walls as observed by field emission scanning electron microscopy
N Terashima et al.
COMPTES RENDUS BIOLOGIES (2004)
Mechanical properties of spruce wood cell walls by nanoindentation
W Gindl et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2004)
Natural fibres: can they replace glass in fibre reinforced plastics?
P Wambua et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Imaging the mechanical properties of wood cell wall layers by atomic force modulation microscopy
B Clair et al.
IAWA JOURNAL (2003)