Related references
Note: Only part of the references are listed.Characterization of Shear Behavior in Stainless Steel Wire Mesh Using Bias-Extension and Picture Frame Tests
Caizheng Wang et al.
JOURNAL OF ENGINEERING MECHANICS (2020)
Computational modeling of through-thickness flow and pressure drop characteristics in woven matrix porous media
Z. Zhi et al.
INTERNATIONAL JOURNAL OF MODELLING AND SIMULATION (2020)
Blast testing of high performance geopolymer composite walls reinforced with steel wire mesh and aluminium foam
Jian Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Multi-sensor technology for B-spline modelling and deformation analysis of composite structures
Hao Yang et al.
COMPOSITE STRUCTURES (2019)
Determination of interfacial heat transfer coefficient for the flow assisted mixed convection through brass wire mesh
Banjara Kotresha et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2019)
Tensile behavior of on- and off-axis carbon fiber reinforced polymer composites incorporating steel wire mesh
Gia Toai Truong et al.
MECHANICS OF MATERIALS (2019)
A high-fidelity approximate model for determining lower-bound buckling loads for stiffened shells
Kuo Tian et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)
A novel approach to investigate the effect of meso-scale yarn structure on the in-plane mechanical response of woven monofilament textiles by numerical modeling of experiments
Ozan Erol et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2018)
Effective elastic constants of wire mesh material studied by theoretical and finite element methods
Qian Zhang et al.
COMPOSITE STRUCTURES (2018)
GF/epoxy laminates embedded with wire nets: A way to improve the low-velocity impact resistance and energy absorption ability
Yun Wan et al.
COMPOSITE STRUCTURES (2018)
Intelligent 3D data extraction method for deformation analysis of composite structures
Xiangyang Xu et al.
COMPOSITE STRUCTURES (2018)
Numerical investigation of reactive powder concrete reinforced with steel wire mesh against high-velocity projectile penetration
Jian Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
y An Equivalent Continuum Approach to Efficiently Model the Response of Steel Wire Meshes to Rockfall Impacts
A. Mentani et al.
ROCK MECHANICS AND ROCK ENGINEERING (2018)
Steel Wire Mesh as a Thermally Resistant SERS Substrate
Tomasz Szymborski et al.
NANOMATERIALS (2018)
Low-velocity impact behaviour of sandwich panels with homogeneous and stepwise graded foam cores
Guangyong Sun et al.
MATERIALS & DESIGN (2018)
Numerical and experimental study of steel wire mesh and basalt fibre mesh strengthened structural insulated panel against projectile impact
Qingfei Meng et al.
ADVANCES IN STRUCTURAL ENGINEERING (2018)
Recent advances in modeling and experiments of Kevlar ballistic fibrils, fibers, yarns and flexible woven textile fabrics - a review
Subramani Sockalingam et al.
TEXTILE RESEARCH JOURNAL (2017)
Terrestrial laser scanning technology for deformation monitoring and surface modeling of arch structures
Hao Yang et al.
COMPOSITE STRUCTURES (2017)
Impact behaviour of pultruded GFRP composites under low-velocity impact loading
Zongjun Li et al.
COMPOSITE STRUCTURES (2017)
An experimental investigation on fluid flow and heat transfer characteristics of sintered woven wire mesh structures
Yangpeng Liu et al.
APPLIED THERMAL ENGINEERING (2015)
Properties and failure behavior of hybrid wire mesh/carbon fiber reinforced thermoplastic composites under quasi-static tensile load
H. Hasselbruch et al.
MATERIALS & DESIGN (2015)
Wire-woven cellular metals: The present and future
Ki-Ju Kang
PROGRESS IN MATERIALS SCIENCE (2015)
Finite element implementation of an orthotropic plasticity model for sheet metal in low velocity impact simulations
J. Mars et al.
THIN-WALLED STRUCTURES (2015)
Finite element simulation of impact response of wire mesh screens
Caizheng Wang et al.
DYMAT 2015 - 11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING (2015)
Evaluation of normalisation methods for uniaxial bias extension tests on engineering fabrics
Frank Haertel et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)
Characterization of the Orthotropic Elastic Constants of a Micronic Woven Wire Mesh via Digital Image Correlation
S. M. Kraft et al.
EXPERIMENTAL MECHANICS (2014)
Calibration of anisotropic yield criterion with conventional tests or biaxial testl
Shunying Zhang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2014)
Multi-scale analysis of optic chiasmal compression by finite element modelling
Xiaofei Wang et al.
JOURNAL OF BIOMECHANICS (2014)
In-plane compression response of wire-woven metal cored sandwich panels
M. G. Lee et al.
MATERIALS & DESIGN (2014)
Effect of Mesoscale and Multiscale Modeling on the Performance of Kevlar Woven Fabric Subjected to Ballistic Impact: A Numerical Study
Xin Jia et al.
APPLIED COMPOSITE MATERIALS (2013)
Discrete modelling of hexagonal wire meshes with a stochastically distorted contact model
Klaus Thoeni et al.
COMPUTERS AND GEOTECHNICS (2013)
Numerical analysis of a ballistic impact on textile fabric
Cuong Ha-Minh et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)
Development of constitutive models for dynamic strain aging regime in Austenitic stainless steel 304
Amit Kumar Gupta et al.
MATERIALS & DESIGN (2013)
Equivalent material properties of a wire-woven cellular core
Ki Won Lee et al.
MECHANICS OF MATERIALS (2013)
Fiber-Level Modeling of Dynamic Strength of Kevlar® KM2 Ballistic Fabric
M. Grujicic et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2012)
An experimental investigation on the low velocity impact response of composite plates repaired by VARIM and hand lay-up processes
Cesim Atas et al.
COMPOSITE STRUCTURES (2011)
Experimental, numerical and analytical modelling of a newly developed rockfall protective cable-net structure
S. Dhakal et al.
NATURAL HAZARDS AND EARTH SYSTEM SCIENCES (2011)
Digital element approach for simulating impact and penetration of textiles
Youqi Wang et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)
Multiscale modeling of the impact of textile fabrics based on hybrid element analysis
Gaurav Nilakantan et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)
On the finite element analysis of woven fabric impact using multiscale modeling techniques
Gaurav Nilakantan et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)
Development of a Meso-Scale Material Model for Ballistic Fabric and Its Use in Flexible-Armor Protection Systems
M. Grujicic et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2010)
Impact of woven fabric: Experiments and mesostructure-based continuum-level simulations
Ethan M. Parsons et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2010)
Ballistic Impact of Dry Woven Fabric Composites: A Review
Ala Tabiei et al.
Applied Mechanics Reviews (2008)
Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark results
J. Cao et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Experimental analysis of the influence of tensions on in plane shear behaviour of woven composite reinforcements
Jean Launay et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
A numerical investigation of the influence of yarn-level finite-element model on energy absorption by a flexible-fabric armour during ballistic impact
M. Grujicic et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2008)
General framework for the identification of constitutive parameters from full-field measurements in linear elasticity
S. Avril et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)
A continuum shell finite element model for impact simulation of woven fabrics
A. Shahkarami et al.
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2007)
The out-of-plane compressive behaviour of woven-core sandwich plates
M Zupan et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2004)
Anisotropic parameter identification using inhomogeneous tensile test
A Khalfallah et al.
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2002)
Share Paper
