Journal
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Volume 769, Issue -, Pages -Publisher
ELSEVIER SCIENCE SA
DOI: 10.1016/j.msea.2019.138474
Keywords
Mg alloy; Rolling; Microstructure; Mechanical properties; Ignition temperature
Categories
Funding
- JSPS KAKENHI [JP15K06518]
Ask authors/readers for more resources
In this study, the microstructures, mechanical properties, and ignition temperatures of hot-rolled Mg-1.5Zn-X (X: Ca and/or Sr) alloys were investigated. The Mg-1.5Zn, Mg-1.5Zn-1Ca and Mg-1.52n-1Sr alloys had the mean grain sizes of 56.1 mu m, 8.7 mu m, and 18.5 mu m, respectively. This indicates that Ca addition exerts a stronger effect on grain refinement than Sr addition. Both Ca and Sr additions significantly weakened the basal texture to approximately one-quarter in intensity for the annealed sheets. Ca-containing alloys exhibited texture splitting in the transverse direction, while Sr-containing alloys tended to maintain it in the rolling direction after annealing. The Ca and Sr additions improved the mechanical strength considerably due to grain refinement, which overcompensated for the influence of texture softening. Meanwhile, benefiting from the weakened textures, the 1% Ca and Sr additions remarkably increased the Erichsen values from 3.8 to 8.0 and 7.1, respectively. However, further addition resulted in the deterioration of both tensile ductility and stretch formability due to the cracking of secondary-phase particles. Ca addition had a better effect on enhancing the flame-retardant property than Sr addition, and 2% Ca and Sr additions increased the ignition temperature from 629 degrees C to 800 degrees C and 720 degrees C, respectively.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available