Related references
Note: Only part of the references are listed.Influence of Al2O3 and palm oil-mixed nano-fluid on machining performances of Inconel-690: IF-THEN rules-based FIS model in eco-benign milling
Binayak Sen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
On the periodicity of fixed-abrasive planetary lapping based on a generic model
Hao Nan Li et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Investigation of mechanics and machinability of titanium alloy thin-walled parts by CBN grinding head
Lida Zhu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Analysis of volume ratio of castor/soybean oil mixture on minimum quantity lubrication grinding performance and microstructure evaluation by fractal dimension
Shuming Guo et al.
INDUSTRIAL CROPS AND PRODUCTS (2018)
Temperature field model and experimental verification on cryogenic air nanofluid minimum quantity lubrication grinding
Jianchao Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Spectral analysis and power spectral density evaluation in Al2O3 nanofluid minimum quantity lubrication milling of 45 steel
Qingan Yin et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
An approach to cleaner production for machining hardened steel using different cooling-lubrication conditions
Mozammel Mia et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Parametric and nonparametric description of the surface topography in the dry and MQCL cutting conditions
G. M. Krolczyk et al.
MEASUREMENT (2018)
Effects of the physicochemical properties of different nanoparticles on lubrication performance and experimental evaluation in the NMQL milling of Ti-6Al-4V
Qingan Yin et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Maximum undeformed equivalent chip thickness for ductile-brittle transition of zirconia ceramics under different lubrication conditions
Min Yang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
Analysis of grinding mechanics and improved predictive force model based on material-removal and plastic-stacking mechanisms
Yanbin Zhang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)
Heat transfer performance of MQL grinding with different nanofluids for Ni-based alloys using vegetable oil
Benkai Li et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Experimental evaluation on tribological performance of the wheel/workpiece interface in minimum quantity lubrication grinding with different concentrations of Al2O3 nanofluids
Yaogang Wang et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Comparative evaluation of the lubricating properties of vegetable-oil-based nanofluids between frictional test and grinding experiment
Yaogang Wang et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Research on microscale skull grinding temperature field under different cooling conditions
Min Yang et al.
APPLIED THERMAL ENGINEERING (2017)
Investigation of the flow field for a double-outlet nozzle during minimum quantity lubrication grinding
Cong Mao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review
Anuj Kumar Sharma et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Experimental evaluation of cooling performance by friction coefficient and specific friction energy in nanofluid minimum quantity lubrication grinding with different types of vegetable oil
Yanbin Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Experimental study on the effect of nanoparticle concentration on the lubricating property of nanofluids for MQL grinding of Ni-based alloy
Yanbin Zhang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Characteristics and removal mechanism in laser cutting of cBN-WC-10Co composites
Cong Mao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Experimental evaluation of the lubrication properties of the wheel/workpiece interface in MQL grinding with different nanofluids
Yaogang Wang et al.
TRIBOLOGY INTERNATIONAL (2016)
High performance cutting of advanced aerospace alloys and composite materials
Rachid M'Saoubi et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)
Measurements of the contact angle of nanofluids and development of a new correlation
Jabez Chinnam et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2015)
Experimental research on the energy ratio coefficient and specific grinding energy in nanoparticle jet MQL grinding
Dongkun Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Experimental evaluation of the lubrication performance of MoS2/CNT nanofluid for minimal quantity lubrication in Ni-based alloy grinding
Yanbin Zhang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
Performance evaluation of Ti-6Al-4V grinding using chip formation and coefficient of friction under the influence of nanofluids
Dinesh Setti et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil
Yanbin Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Multi-response optimization of minimum quantity lubrication parameters using Taguchi-based grey relational analysis in turning of difficult-to-cut alloy Haynes 25
Murat Sarikaya et al.
JOURNAL OF CLEANER PRODUCTION (2015)
The Effect of Processing Parameters on the Performance of Spark Plasma Sintered cBN-WC-Co Composites
Cong Mao et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Stress characteristics and fracture wear of brazed CBN grains in monolayer grinding wheels
Wenfeng Ding et al.
WEAR (2015)
Research on chip formation parameters of aluminum alloy 6061-T6 based on high-speed orthogonal cutting model
Daochun Xu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide(MoS2) nanolubrication in end milling machining
Bizhan Rahmati et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Taguchi design and response surface methodology based analysis of machining parameters in CNC turning under MQL
Murat Sarikaya et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Environmental friendly cutting fluids and cooling techniques in machining: a review
Sujan Debnath et al.
JOURNAL OF CLEANER PRODUCTION (2014)
An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy
M. Sayuti et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Taguchi Method Approach on Effect of Lubrication Condition on Surface Roughness in Milling Operation
Mohamad Syahmi Shahrom et al.
MALAYSIAN TECHNICAL UNIVERSITIES CONFERENCE ON ENGINEERING & TECHNOLOGY 2012 (MUCET 2012) (2013)
An optimization method of the machining parameters in high-speed machining of stainless steel using coated carbide tool for best surface finish
Ahmad Hamdan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions
S. Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2012)
Tribological Effects of BN and MoS2 Nanoparticles Added to Polyalphaolefin Oil in Piston Skirt/Cylinder Liner Tests
Nicholaos G. Demas et al.
TRIBOLOGY LETTERS (2012)
Machining induced surface integrity in titanium and nickel alloys: A review
Durul Ulutan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2011)
Cooling techniques for improved productivity in turning
Vishal S. Sharma et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
An experimental investigation of the effects of workpiece and grinding parameters on minimum quantity lubrication-MQL grinding
T. Tawakoli et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Evaluation of machinability according to the changes in machine tools and cooling lubrication environments and optimization of cutting conditions using Taguchi method
Young-Kug Hwang et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2009)
A new multi-view approach to characterize 3D chip morphology and properties in end milling titanium Ti-6Al-4V
J. Sun et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Mechanism of minimum quantity lubrication in high-speed milling of hardened steel
Y. S. Liao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Feasibility study of the minimum quantity lubrication in high-speed end milling of NAK80 hardened steel by coated carbide tool
Y. S. Liao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Metallurgical study on chips obtained by high speed machining of a Ti-6 wt.%Al-4 wt.%V. alloy
J. D. Puerta Velasquez et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Analysis of surface integrity for minimum quantity lubricant -: MQL in grinding
Leonardo Roberto da Silva et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Tribofilm formation and mild wear by tribo-sintering of nanometer-sized oxide particles on rubbing steel surfaces
H. Kato et al.
WEAR (2007)
Experimental studies on drilling of aluminium (AA1050) under dry, minimum quantity of lubricant, and flood-lubricated conditions
J. P. Davim et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
An investigation on tribological properties of graphite nanosheets as oil additive
H. D. Huang et al.
WEAR (2006)
Behavior of fullerene-like WS2 nanoparticles under severe contact conditions
L Rapoport et al.
WEAR (2005)
Effect of coolant strategy on tool performance, chip morphology and surface quality during high-speed machining of A356 aluminum alloy
HA Kishawy et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Mechanism of friction of fullerenes
L Rapoport et al.
INDUSTRIAL LUBRICATION AND TRIBOLOGY (2002)
Share Paper
