Highly efficient iterative methods for solving linear equations of three-dimensional sphere discontinuous deformation analysis

The efficiency of solving equations plays an important role in implicit-scheme discontinuous deformation analysis (DDA). A systematic investigation of six iterative methods, namely, symmetric successive over relaxation (SSOR), Jacobi (J), conjugate gradient (CG), and three preconditioned CG methods (ie, J-PCG, block J-PCG [BJ-PCG], and SSOR-PCG), for solving equations in three-dimensional sphere DDA (SDDA) is conducted in this paper. Firstly, simultaneous equations of the SDDA and iterative formats of the six solvers are presented. Secondly, serial and OpenMP-based parallel computing numerical tests are done on a 16-core PC, the result of which shows that (a) for serial computing, the efficiency of the solvers is in this order: SSOR-PCG > BJ-PCG > J-PCG > SSOR>J > CG, while for parallel computing, BJ-PCG is the best solver; and (b) CG is not only the most sensitive to the ill-condition of the equations but also the most time consuming under both serial and parallel computing. Thirdly, to estimate the effects of equation solvers acting on SDDA computations, an application example with 10 000 spheres and 200 000 calculation steps is simulated on this 16-core PC using serial and parallel computing. The result shows that SSOR-PCG is about six times faster than CG for serial computing, while BJ-PCG is about four times faster than CG for parallel computing. On the other hand, the whole computation time using BJ-PCG for parallel computing is 3.37 hours (ie, 0.061 s per step), which is about 36 times faster than CG for serial computing. Finally, some suggestions are given based on this investigation result.