Hydrothermal upgrading of algae paste in a continuous flow reactor

This investigation demonstrates the utility of a novel laboratory scale continuous plug flow reactor for fast Hydrothermal Liquefaction (HTL) of microalgae in a quartz lined chamber. Reactions were carried out between 300 and 380 degrees C and residence times of 0.5-4 min. Cyclohexane was used as a co-solvent to enhance extraction and prevent char formation. Highest biocrude yield of 38 wt.% was achieved at 380 degrees C and 30 s as well as Water Soluble Fraction containing up to 60 wt.% matter recovered. Analysis of the biocrude showed that the extent of deoxygenation and denitrogenation after HTL varied and is dependent on the reaction conditions, Fourier Transform Infrared Spectroscopy analysis showed that biocrude contains similar functional moieties with only a small difference observed at different reaction conditions. Conversely, the Simulated Distillation and Size Exclusion Chromatography data showed that harsher conditions produced marginally better biocrude with improved boiling point profile and lower molecular weight compounds, respectively which was confirmed using Gas Chromatography-Mass Spectrometry. (C) 2015 Elsevier Ltd. All rights reserved.