Related references
Note: Only part of the references are listed.Separation of colloidal minerals from water by oscillating flows and grouping
Eran Halfi et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2019)
Comparative analysis on floc growth behaviors during ballasted flocculation by using aluminum sulphate (AS) and polyaluminum chloride (PACl) as coagulants
Weipeng He et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2019)
Application of enteromorpha polysaccharides as coagulant aid in the simultaneous removal of CuO nanoparticles and Cu2+: Effect of humic acid concentration
Yuanxia Luo et al.
CHEMOSPHERE (2018)
Technical, economic and environmental assessment of coagulation/filtration tertiary treatment processes in full-scale wastewater treatment plants
Dan Wang et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Effect of the micro-flocculation stage on the flocculation/sedimentation process: The role of shear rate
Zhenbei Wang et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2018)
Optimization of flocculation conditions for soluble cadmium removal using the composite flocculant of green anion polyacrylamide and PAC by response surface methodology
Caifeng Zhao et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2018)
Optimized removal of natural organic matter by ultrasound-assisted coagulation of recycling drinking water treatment sludge
Zhiwei Zhou et al.
ULTRASONICS SONOCHEMISTRY (2018)
The role of mixing hydrodynamics on floc growth in unbaffled square stirred-tank reactors for flocculation
Weipeng He et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2018)
Influence of the Mixing Energy Consumption Affecting Coagulation and Floc Aggregation
Yamuna S. Vadasarukkai et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)
Influence of coagulation mechanisms and floc formation on filterability
Ruyuan Jiao et al.
JOURNAL OF ENVIRONMENTAL SCIENCES (2017)
Fractal dimension of large aggregates under different flocculation conditions
Rodrigo B. Moruzzi et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2017)
Comparison of flocs characteristics using before and after composite coagulants under different coagulation mechanisms
Bing Wang et al.
BIOCHEMICAL ENGINEERING JOURNAL (2017)
Flocculation properties of several microalgae and a cyanobacterium species during ferric chloride, chitosan and alkaline flocculation
Sanjaya Lama et al.
BIORESOURCE TECHNOLOGY (2016)
Polyacrylamide grafted cellulose as an eco-friendly flocculant: Key factors optimization of flocculation to surfactant effluent
Hangcheng Zhu et al.
CARBOHYDRATE POLYMERS (2016)
Breakage and regrowth of flocs formed by sweep coagulation using additional coagulant of poly aluminium chloride and non-ionic polyacrylamide
Jun Nan et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2016)
Evaluation of kaolin floc characteristics during coagulation process: a case study with a continuous flow device
Zhenbei Wang et al.
RSC ADVANCES (2016)
Compound bioflocculant and polyaluminum chloride in kaolin-humic acid coagulation: Factors influencing coagulation performance and floc characteristics
Ruihua Li et al.
BIORESOURCE TECHNOLOGY (2014)
Role of mixing conditions on coagulation performance and flocs breakage formed by magnesium hydroxide
Jianhai Zhao et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2014)
Effect of dosing sequence and raw water pH on coagulation performance and flocs properties using dual-coagulation of polyaluminum chloride and compound bioflocculant in low temperature surface water treatment
Xin Huang et al.
CHEMICAL ENGINEERING JOURNAL (2013)
Enhanced particle destabilization and aggregation by flash-mixing coagulation for drinking water treatment
Jr-Lin Lin et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2013)
Effect of dosing sequence and solution pH on floc properties of the compound bioflocculant-aluminum sulfate dual-coagulant in kaolin-humic acid solution treatment
Xiaowen Bo et al.
BIORESOURCE TECHNOLOGY (2012)
Coagulation efficiency and flocs characteristics of recycling sludge during treatment of low temperature and micro-polluted water
Zhiwei Zhou et al.
JOURNAL OF ENVIRONMENTAL SCIENCES (2012)
The role of mixing conditions on floc growth, breakage and re-growth
Wen-zheng Yu et al.
CHEMICAL ENGINEERING JOURNAL (2011)
Effect of two-stage coagulant addition on coagulation-ultrafiltration process for treatment of humic-rich water
Ting Liu et al.
WATER RESEARCH (2011)
Comparative study of the effects of experimental variables on growth rates of aluminum and iron hydroxide flocs during coagulation and their structural characteristics
Feng Xiao et al.
DESALINATION (2010)
Breakage and Regrowth of Al-Humic Flocs - Effect of Additional Coagulant Dosage
Wen-Zheng Yu et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2010)
Effect of dosing method on color removal performance and flocculation dynamics of polyferric-organic polymer dual-coagulant in synthetic dyeing solution
Jincheng Wei et al.
CHEMICAL ENGINEERING JOURNAL (2009)
Improvement of coagulation efficiency using instantaneous flash mixer (IFM) for water treatment
S Byun et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2005)
A review of floc strength and breakage
P Jarvis et al.
WATER RESEARCH (2005)
Time requirement for rapid-mixing in coagulation
CC Kan et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2002)