Related references
Note: Only part of the references are listed.A Comparison Between the Flat and the Curved Friction Stir Welding (FSW) Thermomechanical Behaviour
Bahman Meyghani et al.
ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2020)
Thermo-mechanical Analysis of Friction Stir Welding: A Review on Recent Advances
Gaoqiang Chen et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020)
Influence of tool thread pitch on material flow and thermal process in friction stir welding
Z. Sun et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Developing a Finite Element Model for Thermal Analysis of Friction Stir Welding (FSW) Using Hyperworks
Bahman Meyghani et al.
ADVANCES IN MATERIAL SCIENCES AND ENGINEERING (2020)
Evaluation of dynamic development of grain structure during friction stir welding of pure copper using a quasi in situ method
X. C. Liu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Predicting recrystallized grain size in friction stir processed 304L stainless steel
M. P. Miles et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Formability of an AA5083 aluminum alloy T-joint using SSFSW on both corners
Yu Su et al.
MATERIALS AND MANUFACTURING PROCESSES (2019)
Experimental evaluation of strain and strain rate during rapid cooling friction stir welding of pure copper
X. C. Liu et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2019)
Thermomechanical Analysis of the Friction Stir Welding Process
D. G. Andrade et al.
PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019) (2019)
Thermal Modelling of Friction Stir Welding (FSW) Using Calculated Young's Modulus Values
Bahman Meyghani et al.
ADVANCES IN JOINING TECHNOLOGY (2019)
Effects of pin thread on the in-process material flow behavior during friction stir welding: A computational fluid dynamics study
Gaoqiang Chen et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)
Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review
G. K. Padhy et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Computational fluid dynamics simulation of friction stir welding: A comparative study on different frictional boundary conditions
Gaoqiang Chen et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
A comparison between temperature dependent and constant Young's modulus values in investigating the effect of the process parameters on thermal behaviour during friction stir welding
B. Meyghani et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2018)
Numerical modelling and experimental investigation of thermal and material flow in probeless friction stir spot welding process of Al 2198-T8
Xiawei Yang et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2018)
Friction Stir Welding of Non-Heat-Treatable High-Strength Alloy 5083-O
Takashi Nakamura et al.
METALS (2018)
Thermomechanical modeling of friction stir welding in a Cu-DSS dissimilar joint
V. Shokri et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Numerical analysis and analytical modeling of the spatial distribution of heat flux during friction stir welding
Shuai Zhang et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Modeling of defects in friction stir welding using coupled Eulerian and Lagrangian method
Prashant Chauhan et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
A numerical model of pin thread effect on material flow and heat generation in shear layer during friction stir welding
Z. Sun et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Finite element modeling of grain growth by point tracking method in friction stir welding of AA6082-T6
Z. Y. Wan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Mechanical behaviour at high temperature as induced during welding of a 6xxx series aluminium alloy
D. Maisonnette et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2017)
Effect of ultrasonic vibration on welding load, temperature and material flow in friction stir welding
Y. B. Zhong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
A Comparison of Different Finite Element Methods in the Thermal Analysis of Friction Stir Welding (FSW)
Bahman Meyghani et al.
METALS (2017)
A Finite Element Model to Simulate Defect Formation during Friction Stir Welding
Zhi Zhu et al.
METALS (2017)
Finite-element analysis of the tool tilt angle effect on the formation of friction stir welds
Ling Long et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Transient model of heat transfer and material flow at different stages of friction stir welding process
L. Shi et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Monte Carlo simulation of grain growth and welding zones in friction stir welding of AA6082-T6
Z. Zhang et al.
JOURNAL OF MATERIALS SCIENCE (2016)
Ultrasonic assisted friction stir processing of 6063 aluminum alloy
Sachin Kumar
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2016)
An Alternative Frictional Boundary Condition for Computational Fluid Dynamics Simulation of Friction Stir Welding
Gaoqiang Chen et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)
Two 3D thermomechanical numerical models of friction stir welding processes with a trigonal pin
Philippe Bussetta et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2016)
Simulation of material plastic flow driven by non-uniform friction force during friction stir welding and related defect prediction
Yucan Zhu et al.
MATERIALS & DESIGN (2016)
Thermal Mechanical Modeling of the Plunge Stage During Friction-Stir Welding of Dissimilar Al 6061 to TRIP 780 Steel
Xun Liu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2015)
Numerical studies of tool diameter on strain rates, temperature rises and grain sizes in friction stir welding
Zhao Zhang et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2015)
Numerical modeling for the effect of pin profiles on thermal and material flow characteristics in friction stir welding
Hao Su et al.
MATERIALS & DESIGN (2015)
Material flow visualization in Friction Stir Welding via particle tracing
N. Dialami et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2015)
Thermal energy generation and distribution in friction stir welding of aluminum alloys
H. Su et al.
ENERGY (2014)
Analysis of energy flow in gas metal arc welding processes through self-consistent three-dimensional process simulation
Fenggui Lu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)
A review of numerical analysis of friction stir welding
Xiaocong He et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Numerical modeling of FSW welding process incorporating a parameter estimation technique
S. Pereyra et al.
REVISTA INTERNACIONAL DE METODOS NUMERICOS PARA CALCULO Y DISENO EN INGENIERIA (2014)
Design, Fabrication and Testing of Fixture for Implementation of a New Approach to Incorporate Tool tilting in Friction Stir Welding
Mokhtar Awang et al.
ICPER 2014 - 4TH INTERNATIONAL CONFERENCE ON PRODUCTION, ENERGY AND RELIABILITY (2014)
Three-dimensional numerical and experimental investigation on friction stir welding processes of ferritic stainless steel
Hoon-Hwe Cho et al.
ACTA MATERIALIA (2013)
Computational fluid dynamics studies on heat generation during friction stir welding of aluminum alloy
Gao-qiang Chen et al.
COMPUTATIONAL MATERIALS SCIENCE (2013)
Effect of enhanced heat and mass transport and flow reversal during cool down on weld pool shapes in laser spot welding of steel
Z. S. Saldi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)
Coupled Eulerian Lagrangian finite element modeling of friction stir welding processes
Fadi Al-Badour et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
HEAT GENERATION DURING PLUNGE STAGE IN FRICTION STIR WELDING
Darko M. Veljic et al.
THERMAL SCIENCE (2013)
The Temperature Field Test and Numerical Simulation of Steel's Friction Stir Welding Process
Xijing Wang et al.
MECHATRONICS AND INTELLIGENT MATERIALS III, PTS 1-3 (2013)
Transient Heat and Material Flow Modeling of Friction Stir Processing of Magnesium Alloy using Threaded Tool
Zhenzhen Yu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Integrated modeling of friction stir welding of 6xxx series Al alloys: Process, microstructure and properties
A. Simar et al.
PROGRESS IN MATERIALS SCIENCE (2012)
Analysis of transient temperature and residual thermal stresses in friction stir welding of aluminum alloy 6061-T6 via numerical simulation
Mohammad Riahi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
A fully coupled thermomechanical two-dimensional simulation model for orthogonal cutting: formulation and simulation
M. Agmell et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2011)
Scaling of coupled heat transfer and plastic deformation around the pin in friction stir welding
Patricio F. Mendez et al.
ACTA MATERIALIA (2010)
A Semianalytical Thermal Model for Fiction Stir Welding
P. Ferro et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Effect of shoulder size on the temperature rise and the material deformation in friction stir welding
Z. Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
A thermal model of friction stir welding applied to Sc-modified Al-Zn-Mg-Cu alloy extrusions
C. Hamilton et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
The NeT bead-on-plate benchmark for weld residual stress simulation
P. J. Bouchard
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2009)
Friction stir welding of aluminium alloys
P L Threadgill et al.
INTERNATIONAL MATERIALS REVIEWS (2009)
A CONTRIBUTION TO A CRITICAL REVIEW OF FRICTION STIR WELDING NUMERICAL SIMULATION
Olivier Lorrain et al.
JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES (2009)
An Investigation of Friction During Friction Stir Welding of Metallic Materials
K. Kumar et al.
MATERIALS AND MANUFACTURING PROCESSES (2009)
Friction stir welding of steels: process design through continuum based FEM model
G. Buffa et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2009)
Torque, power requirement and stir zone geometry in friction stir welding through modeling and experiments
A. Arora et al.
SCRIPTA MATERIALIA (2009)
A thermal model of friction stir welding in aluminum alloys
C. Hamilton et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Modeling texture evolution during friction stir welding of stainless steel with comparison to experiments
Jae-Hyung Cho et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2008)
Comparison of two contact models in the simulation of friction stir welding process
Z. Zhang
JOURNAL OF MATERIALS SCIENCE (2008)
Recent advances in friction-stir welding - Process, weldment structure and properties
R. Nandan et al.
PROGRESS IN MATERIALS SCIENCE (2008)
A conceptual model for the process variables related to heat generation in friction stir welding of aluminum
Kevin J. Colligan et al.
SCRIPTA MATERIALIA (2008)
Thermal modelling of friction stir welding
H. B. Schmidt et al.
SCRIPTA MATERIALIA (2008)
A fully coupled thermo-mechanical model of friction stir welding
Z. Zhang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
The simulation of material behaviors in friction stir welding process by using rate-dependent constitutive model
Z. Zhang et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Modelling of strain hardening during friction stir welding of stainless steel
J-H Cho et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2007)
Strain rates and grain growth in Al 5754 and Al 6061 friction stir spot welds
A. Gerlich et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)
Three-dimensional heat and material flow during friction stir welding of mild steel
R. Nandan et al.
ACTA MATERIALIA (2007)
Tool materials selection for friction stir welding of L80 steel
W. Gan et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2007)
Numerical modelling of 3D plastic flow and heat transfer during friction stir welding of stainless steel
R. Nandan et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2006)
CFD modelling of friction stir welding of thick plate 7449 aluminium alloy
P. A. Colegrove et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2006)
Investigation on texture evolution during friction stir welding of stainless steel
JH Cho et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
A continuum based FEM model for friction stir welding - model development
G Buffa et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Material flow in butt friction stir welds in AA2024-T3
HNB Schmidt et al.
ACTA MATERIALIA (2006)
Mechanical and thermal modelling of friction stir welding
P Heurtier et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
3-Dimensional CFD modelling of flow round a threaded friction stir welding tool profile
PA Colegrove et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Friction stir welding and processing
RS Mishra et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2005)
Modeling strain hardening and texture evolution in friction stir welding of stainless steel
JH Cho et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
A local model for the thermomechanical conditions in friction stir welding
H Schmidt et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2005)
Computer simulated and experimentally verified isothermal extrusion of 7075 aluminium through continuous ram speed variation
J Zhou et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Numerical simulation of transient temperature and residual stresses in friction stir welding of 304L stainless steel
XK Zhu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
2D and 3D numerical models of metal cutting with damage effects
O Pantale et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2004)
An analytical model for the heat generation in friction stir welding
H Schmidt et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2004)
Finite element modeling of friction stir welding - thermal and thermomechanical analysis
CM Chen et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Prediction of temperature distribution and thermal history during friction stir welding: input torque based model
MZH Khandkar et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2003)
Thermal modeling of friction stir welding in a moving coordinate system and its validation
M Song et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Heat transfer in friction stir welding - Experimental and numerical studies
YJ Chao et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2003)
Numerical and experimental study of the heat transfer process in friction stir welding
M Song et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2003)
Three-dimensional modeling of the friction stir-welding process
P Ulysse
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
Modelling of hard part machining
EG Ng et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Simulation of a flapping flexible filament in a flowing soap film by the immersed boundary method
LD Zhu et al.
JOURNAL OF COMPUTATIONAL PHYSICS (2002)
A process model for friction stir welding of age hardening aluminum alloys
O Frigaard et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)
State-of-the-art of simulation of sheet metal forming
AE Tekkaya
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)
Share Paper
