Related references
Note: Only part of the references are listed.Macroscopic kinetics modelling of liquid liquid reaction system: Epoxidation of fatty acid methyl esters
Zhenyu Wu et al.
INDUSTRIAL CROPS AND PRODUCTS (2018)
Structural modification of waste cooking oil methyl esters as cleaner plasticizer to substitute toxic dioctyl phthalate
Ting Zheng et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Parameters affecting thermal risk through a kinetic model under adiabatic condition: Application to liquid-liquid reaction system
Sebastien Leveneur et al.
THERMOCHIMICA ACTA (2018)
Synthesis and application of environmental soybean oil-based epoxidized glycidyl ester plasticizer for poly(vinyl chloride)
Jie Chen et al.
EUROPEAN JOURNAL OF LIPID SCIENCE AND TECHNOLOGY (2017)
Novel Reactor for Exothermic Heterogeneous Reaction Systems: Intensification of Mass and Heat Transfer and Application to Vegetable Oil Epoxidation
Zhenyu Wu et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
Thermal Safety Assessment through the Concept of Structure - Reactivity: Application to Vegetable Oil Valorization
Sebastien Leveneur
ORGANIC PROCESS RESEARCH & DEVELOPMENT (2017)
Thermal risk in semi-batch reactors: The epoxidation of soybean oil
Valeria Casson Moreno et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2017)
Numerical studies on dynamic characteristics of oil-water separation in loop flotation column using a population balance model
Xiaolei Cai et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2017)
Low pressure hydrodynamic cavitating device for producing highly stable oil in water emulsion: Effect of geometry and cavitation number
Jitendra Carpenter et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2017)
Intensification of biodiesel production using hydrodynamic cavitation based on high speed homogenizer
Ashish V. Mohod et al.
CHEMICAL ENGINEERING JOURNAL (2017)
Kinetic modeling strategy for an exothermic multiphase reactor system: Application to vegetable oils epoxidation using Prileschajew method
Jun L. Zheng et al.
AICHE JOURNAL (2016)
MASS TRANSFER AND REACTION KINETICS OF SOYBEAN OIL EPOXIDATION IN A FORMIC ACID-AUTOCATALYZED REACTION SYSTEM
Zhenyu Wu et al.
CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2016)
Epoxidation of soybean oil at maximum heat removal and single addition of all reactants
Jacyr V. de Quadros et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2016)
Transesterification of oil to biodiesel in a continuous tubular reactor with static mixers: Modelling reaction kinetics, mass transfer, scale-up and optimization considering fatty acid composition
Blaz Likozar et al.
FUEL PROCESSING TECHNOLOGY (2016)
Droplet size distribution and droplet size correlation of chloroaluminate ionic liquid-heptane dispersion in a stirred vessel
Lu Qi et al.
CHEMICAL ENGINEERING JOURNAL (2015)
Thermal risk assessment of vegetable oil epoxidation
Sebastien Leveneur et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2015)
Intensified synthesis of biodiesel using hydrodynamic cavitation reactors based on the interesterification of waste cooking oil
Ganesh L. Maddikeri et al.
FUEL (2014)
Green synthesis of biolubricant base stock from canola oil
Chandu S. Madankar et al.
INDUSTRIAL CROPS AND PRODUCTS (2013)
Effect of flow rate conditions on bubble formation
G. Corchero et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)
A biphasic model describing soybean oil epoxidation with H2O2 in a fed-batch reactor
E. Santacesaria et al.
CHEMICAL ENGINEERING JOURNAL (2011)
A literature review on mechanisms and models for the coalescence process of fluid particles
Yixiang Liao et al.
CHEMICAL ENGINEERING SCIENCE (2010)
Surfactants from oleic, erucic and petroselinic acid: Synthesis and properties
Markus Dierker et al.
EUROPEAN JOURNAL OF LIPID SCIENCE AND TECHNOLOGY (2010)
A literature review of theoretical models for drop and bubble breakup in turbulent dispersions
Yixiang Liao et al.
CHEMICAL ENGINEERING SCIENCE (2009)
Peroxyformic Acid Formation: A Kinetic Study
Paolo De Filippis et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2009)
Two-phase mass transfer coefficient prediction in stirred vessel with a CFD model
F. Kerdouss et al.
COMPUTERS & CHEMICAL ENGINEERING (2008)
Intensification of esterification of acids for synthesis of biodiesel using acoustic and hydrodynamic cavitation
Mandar A. Kelkar et al.
ULTRASONICS SONOCHEMISTRY (2008)
Numerical investigation into the chemistry induced by hydrodynamic cavitation
JS Krishnan et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2006)
A CFD-PBM coupled model for gas-liquid flows
TF Wang et al.
AICHE JOURNAL (2006)
Implementation of the population balance equation in CFD codes for modelling soot formation in turbulent flames
A Zucca et al.
CHEMICAL ENGINEERING SCIENCE (2006)
Numerical simulation of bubble columns flows: effect of different breakup and coalescence closures
P Chen et al.
CHEMICAL ENGINEERING SCIENCE (2005)
Oxidation of alkylarenes to the corresponding acids using aqueous potassium permanganate by hydrodynamic cavitation
GV Ambulgekar et al.
ULTRASONICS SONOCHEMISTRY (2004)
Influence of physical properties on drop size distributions of stirred liquid-liquid dispersions
M Kraume et al.
CHEMICAL ENGINEERING & TECHNOLOGY (2004)
Droplets formation in turbulent mixing of two immiscible fluids in a new type of static mixer
T Lemenand et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2003)
Modeling of hydrodynamic cavitation reactors: a unified approach
VS Moholkar et al.
CHEMICAL ENGINEERING SCIENCE (2001)
Engineering design methods for cavitation reactors II: Hydrodynamic cavitation
PR Gogate et al.
AICHE JOURNAL (2000)