Related references
Note: Only part of the references are listed.Atmospheric pressure plasmas and direct fluorination treatment of A2O3-filled epoxy resin: A comparison of surface charge dissipation
Cheng Zhang et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Hydrogels with superior mechanical properties from the synergistic effect in hydrophobic-hydrophilic copolymers
Md. Tariful Islam Mredha et al.
CHEMICAL ENGINEERING JOURNAL (2019)
Effects of Various Antifouling Coatings and Fouling on Marine Sonar Performance
Bradley Donnelly et al.
POLYMERS (2019)
The Influence of Surface Wettability and Topography on the Bioactivity of TiO2/Epoxy Coatings on AISI 316L Stainless Steel
Aleksandra Kocijan et al.
MATERIALS (2019)
Perspective on Plasma Polymers for Applied Biomaterials Nanoengineering and the Recent Rise of Oxazolines
Melanie Macgregor et al.
MATERIALS (2019)
Controlled Surface Wettability by Plasma Polymer Surface Modification
Muzammil Iqbal et al.
SURFACES (2019)
Hydrophilic Self-Replenishing Coatings with Long-Term Water Stability for Anti-Fouling Applications
Isabel Jimenez-Pardo et al.
COATINGS (2018)
Surface modifications of polystyrene and their stability: A comparison of DBD plasma deposition and direct fluorination
Fei Kong et al.
APPLIED SURFACE SCIENCE (2018)
Surface Modification of Polymers: Methods and Applications
Srinivasa Kartik Nemani et al.
ADVANCED MATERIALS INTERFACES (2018)
Plasma surface treatment to improve surface charge accumulation and dissipation of epoxy resin exposed to DC and nanosecond-pulse voltages
Cheng Zhang et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2017)
Antifouling and antimicrobial biomaterials: an overview
Iolanda Francolini et al.
APMIS (2017)
Biocompatibility of biomaterials - Lessons learned and considerations for the design of novel materials
Gottfried Schmalz et al.
DENTAL MATERIALS (2017)
Overview of PES biocompatible/hemodialysis membranes: PES-blood interactions and modification techniques
Muhammad Irfan et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Hydrophobic treatment on polymethylmethacrylate surface by nanosecond-pulse DBDs in CF4 at atmospheric pressure
Cheng Zhang et al.
APPLIED SURFACE SCIENCE (2014)
Atmospheric plasma-polymerization of hydrophobic and wear-resistant coatings on glass substrates
Rodolfo Mugica-Vidal et al.
SURFACE & COATINGS TECHNOLOGY (2014)
Improving biocompatibility by surface modification techniques on implantable bioelectronics
Peter Lin et al.
BIOSENSORS & BIOELECTRONICS (2013)
Surface Modification of Polypropylene Membrane by RF Methane/Oxygen Mixture Plasma Treatment
Ching-Yuan Tsai et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2013)
A brief review of environmentally benign antifouling and foul-release coatings for marine applications
Pascal Buskens et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2013)
Nitrogen Plasma Modification and Chemical Derivatization of Polyethylene Surfaces - An In Situ Study Using FTIR-ATR Spectroscopy
Claus-Peter Klages et al.
PLASMA PROCESSES AND POLYMERS (2013)
Antifouling surfaces in medical application
Alicja Utrata-Wesolek
POLIMERY (2013)
Super-wetting surfaces by plasma- and UV-based grafting of micro-rough acrylate coatings
Thomas Bahners et al.
PROGRESS IN ORGANIC COATINGS (2013)
Plasma deposition of a silicone-like layer for the corrosion protection of magnesium
Yeong-Mu Ko et al.
PROGRESS IN ORGANIC COATINGS (2013)
Surface modification of polymers by plasma treatments for the enhancement of biocompatibility and controlled drug release
S. Yoshida et al.
SURFACE & COATINGS TECHNOLOGY (2013)
Evaluation of Protein Adsorption on Atmospheric Plasma Deposited Coatings Exhibiting Superhydrophilic to Superhydrophobic Properties
C. P. Stallard et al.
BIOINTERPHASES (2012)
Nanomechanical and nanotribological properties of plasma nanotextured superhydrophilic and superhydrophobic polymeric surfaces
A. Skarmoutsou et al.
NANOTECHNOLOGY (2012)
Atmospheric Pressure Low Temperature Direct Plasma Technology: Status and Challenges for Thin Film Deposition
Francoise Massines et al.
PLASMA PROCESSES AND POLYMERS (2012)
Atmospheric plasmas for thin film deposition: A critical review
Delphine Merche et al.
THIN SOLID FILMS (2012)
Status and potential of atmospheric plasma processing of materials
Daphne Pappas
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2011)
Generation of a high-density highly non-equilibrium air plasma for high-speed large-area flat surface processing
M. Cernak et al.
PLASMA PHYSICS AND CONTROLLED FUSION (2011)
High Rate Etching of Polymers by Means of an Atmospheric Pressure Plasma Jet
Katja Fricke et al.
PLASMA PROCESSES AND POLYMERS (2011)
Mechanisms of Plasma Polymerization - Reviewed from a Chemical Point of View
Joerg Friedrich
PLASMA PROCESSES AND POLYMERS (2011)
SuperHydrophobic and SuperHydrophilic Polycarbonate by Tailoring Chemistry and Nano-texture with Plasma Processing
Fabio Palumbo et al.
PLASMA PROCESSES AND POLYMERS (2011)
Wettability characteristics of poly(ethylene terephthalate) films treated by atmospheric pressure plasma and ultraviolet excimer light
Keiko Gotoh et al.
POLYMER JOURNAL (2011)
Effect of storage condition and aging on acrylic acid inverse emulsion surface-grafting polymerization of PET films initiated by atmospheric pressure plasmas
J. Sun et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Surface modification of polyimide films using unipolar nanosecond-pulse DBD in atmospheric air
Tao Shao et al.
APPLIED SURFACE SCIENCE (2010)
Stability study of polyacrylic acid films plasma-polymerized on polypropylene substrates at medium pressure
Rino Morent et al.
APPLIED SURFACE SCIENCE (2010)
Induced super hydrophilicity due to surface modification of polypropylene membrane treated by O2 plasma
B. Jaleh et al.
APPLIED SURFACE SCIENCE (2010)
Superhydrophilic and Superwetting Surfaces: Definition and Mechanisms of Control
Jaroslaw Drelich et al.
LANGMUIR (2010)
Argon plasma irradiation of polypropylene
P. Slepicka et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2010)
Modification of surface properties of polypropylene (PP) film using DC glow discharge air plasma
K. Navaneetha Pandiyaraj et al.
APPLIED SURFACE SCIENCE (2009)
Effect of hydrophilic-hydrophobic balance on biocompatibility of poly(methyl methacrylate) (PMMA)-hydroxyapatite (HA) composites
Teodora Gratiela Tihan et al.
MATERIALS CHEMISTRY AND PHYSICS (2009)
Nano-texturing of poly(methyl methacrylate) polymer using plasma processes and applications in wetting control and protein adsorption
Katerina Tsougeni et al.
MICROELECTRONIC ENGINEERING (2009)
Properties of the acrylic acid polymers obtained by atmospheric pressure plasma polymerization
Ionut Topala et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2009)
Deposition of HMDSO-based coatings on PET substrates using an atmospheric pressure dielectric barrier discharge
R. Morent et al.
PROGRESS IN ORGANIC COATINGS (2009)
Deposition of functional coatings from acrylic acid and octamethylcyclotetrasiloxane onto steel using an atmospheric pressure dielectric barrier discharge
A. J. Beck et al.
SURFACE & COATINGS TECHNOLOGY (2008)
Comparison between XPS- and FTIR-analysis of plasma-treated polypropylene film surfaces
R. Morent et al.
SURFACE AND INTERFACE ANALYSIS (2008)
Study of the ageing behaviour of polymer films treated with a dielectric barrier discharge in air, helium and argon at medium pressure
R. Morent et al.
SURFACE & COATINGS TECHNOLOGY (2007)
Plasma deposition of permanent superhydrophilic a-C:H:N films on textiles
Mohammad Mokbul Hossain et al.
PLASMA PROCESSES AND POLYMERS (2007)
Dielectric barrier discharge at atmospheric pressure as a tool to deposit versatile organic coatings at moderate power input
Pieter Heyse et al.
PLASMA PROCESSES AND POLYMERS (2007)
Comparison of the surface characteristics of polypropylene films treated by Ar and mixed gas (Ar/O2) atmospheric pressure plasma
OJ Kwon et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2006)
Non-thermal atmospheric pressure discharges for surface modification
R Foest et al.
PLASMA PHYSICS AND CONTROLLED FUSION (2005)
Influence of the RF plasma polymerization process on the barrier properties of coil-coating
R Serra et al.
PROGRESS IN ORGANIC COATINGS (2005)
Formation of super-hydrophilic surface of hydroxyapatite by ion implantation and plasma treatment
Y Okabe et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Surface characteristics of polypropylene film treated by an atmospheric pressure plasma
OJ Kwon et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Plasma jet treatment of five polymers at atmospheric pressure: surface modifications and the relevance for adhesion
M Noeske et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2004)
Prevention of plasticizer leaching from PVC medical devices by using organic-inorganic hybrid coatings
M Messori et al.
POLYMER (2004)
Plasma surface modification of polystyrene and polyethylene
S Guruvenket et al.
APPLIED SURFACE SCIENCE (2004)
Characterization of surface property of poly(lactide-co-glycolide) after oxygen plasma treatment
YQ Wang et al.
BIOMATERIALS (2004)
Ageing time of wettability on polypropylene surfaces processed by cold plasma
L Carrino et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Hydrophilic surface formation on polymers by ion-assisted reaction
JS Cho et al.
PROGRESS IN ORGANIC COATINGS (2003)
Plasma functionalization of polypropylene with acrylic acid
V Sciarratta et al.
SURFACE & COATINGS TECHNOLOGY (2003)
Plasma surface modification of polymers for biomedical use
C Oehr
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2003)
Plasma surface modification of polyethylene
M Lehocky et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2003)
Atmospheric-pressure plasma treatment of polyester nonwoven fabrics for electroless plating
M Simor et al.
SURFACE & COATINGS TECHNOLOGY (2003)
Atmospheric pressure plasma deposition of structurally well-defined polyacrylic acid films
LJ Ward et al.
CHEMISTRY OF MATERIALS (2003)
A model for plasma modification of polypropylene using atmospheric pressure discharges
R Dorai et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2003)
Hydrophilic modification of polyethersulfone membranes by low temperature plasma-induced graft polymerization
DS Wavhal et al.
JOURNAL OF MEMBRANE SCIENCE (2002)
Atmospheric-pressure diffuse coplanar surface discharge for surface treatments
M Simor et al.
APPLIED PHYSICS LETTERS (2002)
Cold plasma treatment of polypropylene surface: a study on wettability and adhesion
L Carrino et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Plasma-induced graft polymerization of acrylic acid onto poly(ethylene terephthalate) films: characterization and human smooth muscle cell growth on grafted films
B Gupta et al.
BIOMATERIALS (2002)
Anti-reflective coating for the deep coloring of PET fabrics using an atmospheric pressure plasma technique
HR Lee et al.
SURFACE & COATINGS TECHNOLOGY (2001)
Plasma-polymerized coatings using HMDSO precursor for iron protection
C Vautrin-Ul et al.
PROGRESS IN ORGANIC COATINGS (2000)
Share Paper
