Related references
Note: Only part of the references are listed.Effect of ZrO2 content on properties of Cu-ZrO2 nanocomposites synthesized by optimized high energy ball milling
A. Fathy et al.
CERAMICS INTERNATIONAL (2019)
Improving damage resistance and load capacity of thin-ply laminates using ply clustering and small mismatch angles
A. Wagih et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)
Thermal conductivity model of open-cell foam suitable for wide span of porosities
Dongxu Wu et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Experimental and numerical investigation on strengthening mechanisms of nanostructured Al-SiC composites
A. Melaibari et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
MWCNTs and their use in Al-MMCs for ultra-high thermal conductivity applications: A review
A. Miranda et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of Intermetallic Compounds on the Thermal and Mechanical Properties of Al-Cu Composite Materials Fabricated by Spark Plasma Sintering
Kyungju Kim et al.
MATERIALS (2019)
Mechanical properties of Al-Si-SiC composites
Saurabh Tiwari et al.
MATERIALS RESEARCH EXPRESS (2019)
Excellent thermal shock resistance of Al alloy-infiltrated SiC composites
Wei Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Effect of sintering temperature on microstructure and selected properties of spark plasma sintered Al-SiC composites
Beata Leszczynska-Madej et al.
VACUUM (2019)
Effect of high energy ball milling on strengthening of Cu-ZrO2 nanocomposites
A. Abu-Oqail et al.
CERAMICS INTERNATIONAL (2019)
Encapsulation and microwave hybrid processing of Al 6061-Graphene-SiC composites
H. G. Prashantha Kumar et al.
MATERIALS AND MANUFACTURING PROCESSES (2018)
Influence of chemical bonding on thermal contact resistance at silica interface: A molecular dynamics simulation
Zun Huang et al.
COMPUTATIONAL MATERIALS SCIENCE (2018)
Effective elastoplastic properties of carbon nanotube-reinforced aluminum nanocomposites considering the residual stresses
Mojtaba Haghgoo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Experimental investigation on strengthening mechanisms in Al-SiC nanocomposites and 3D FE simulation of Vickers indentation
A. Wagih et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Thermal conductivity model for nanofiber networks
Xinpeng Zhao et al.
JOURNAL OF APPLIED PHYSICS (2018)
Improving compressibility and thermal properties of Al-Al2O3 nanocomposites using Mg particles
A. Wagih et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Thermal conductivity of polymers and polymer nanocomposites
Congliang Huang et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2018)
Influence factors of the inter-nanowire thermal contact resistance in the stacked nanowires
Dongxu Wu et al.
PHYSICA B-CONDENSED MATTER (2018)
Morphological and Wear behaviour of new Al-SiCmicro-SiCnano hybrid nanocomposites fabricated through powder metallurgy
Sajjad Arif et al.
MATERIALS RESEARCH EXPRESS (2018)
Fabricating a Novel Intragranular Microstructure for Al2O3/GdAlO3 Ceramic Composites
Shuai Sun et al.
MATERIALS (2018)
Influence of nanoparticle size distribution on the thermal conductivity of particulate nanocomposites
Cong-Liang Huang et al.
EPL (2017)
A thermal conductivity study of double-pore distributed powdered silica aerogels
Gaosheng Wei et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Thermal conductivity prediction of 2-dimensional square-pore metallic nanoporous materials with kinetic method approach
Cong-Liang Huang et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2017)
Experimental study on the radiative properties of open-cell porous ceramics
Gaosheng Wei et al.
SOLAR ENERGY (2017)
Microstructures and Tensile Properties of Al-Cu Matrix Composites Reinforced with Nano-Sized SiCp Fabricated by Semisolid Stirring Process
Feng Qiu et al.
METALS (2017)
Modified Maxwell model for predicting thermal conductivity of nanocomposites considering aggregation
Wen-Kai Zhen et al.
CHINESE PHYSICS B (2017)
Enhanced thermal conductivity of metallic nanoparticle packed bed by sintering treatment
Zi-Zhen Lin et al.
APPLIED THERMAL ENGINEERING (2017)
The effect of a particle-matrix interface on the Young's modulus of Al-SiC composites
Peter Krizik et al.
JOURNAL OF COMPOSITE MATERIALS (2016)
Thermal performance of metallic nanoparticles in air
Zi-Zhen Lin et al.
APPLIED THERMAL ENGINEERING (2016)
Thermal Properties of Carbon Nanotubes Reinforced Aluminum-Copper Matrix Nanocomposites
Dong Hoon Nam et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2016)
Systematic characterization of transport and thermoelectric properties of a macroscopic graphene fiber
Weigang Ma et al.
NANO RESEARCH (2016)
Effect of Mg addition on mechanical and thermoelectrical properties of Al-Al2O3 nanocomposite
A. Wagih
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)
Effect of iron addition on microstructure, mechanical and magnetic properties of Al-matrix composite produced by powder metallurgy route
A. Fathy et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Thermal conductivity of silica nanoparticle powder: Measurement and theoretical analysis
Congliang Huang et al.
EUROPEAN PHYSICAL JOURNAL PLUS (2015)
Effect of matrix/reinforcement particle size ratio (PSR) on the mechanical properties of extruded Al-SiC composites
A. Fathy et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Study of the thermal, electrical and thermoelectric properties of metallic nanofilms
Weigang Ma et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)
Nanoparticle-Induced Superior Hot Tearing Resistance of A206 Alloy
Hongseok Choi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Synthesis of Al/SiC nanocomposite and evaluation of its mechanical properties using pulse echo overlap method
A. A. El-Daly et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Production of A356-1 wt% SiC nanocomposite by the modified stir casting method
A. Dehghan Hamedan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Nano-silicon carbide reinforced aluminium produced by high-energy milling and hot consolidation
L. Kollo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Fabrication of SiC nanoparticulates reinforced Al matrix composites by combining pressureless infiltration with ball-milling and cold-pressing technology
Bowen Xiong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Investigation of thermal conductivity and microstructure of the α-Al2O3 particulate reinforced aluminum composites (Al/Al2O3-MMC) by powder metallurgy method
C. Tatar et al.
PHYSICA B-CONDENSED MATTER (2010)
On the role of nano-size SiC on lattice strain and grain size of Al/SiC nanocomposite
Y. Saberi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Textures and mechanical properties of extruded Al-Cu alloys in the semisolid state
B. S. Lee et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Bulk Al/SiC nanocomposite prepared by ball milling and hot pressing method
Gu Wan-li
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2006)
A study of a new phenomenological compacting equation
R Panelli et al.
POWDER TECHNOLOGY (2001)
Share Paper
