Related references
Note: Only part of the references are listed.Development of Functionally Graded Tubes Based on Pure Al/Al2O3Metal Matrix Composites Manufactured by Centrifugal Casting for Automotive Applications
Bassiouny Saleh et al.
METALS AND MATERIALS INTERNATIONAL (2020)
Development of functionally graded Cu-Sn-Ni/Al2O3 composite for bearing applications and investigation of its mechanical and wear behavior
Manu Sam et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2019)
Investigations on microstructure, mechanical, and tribological behaviour of AA 7075-x wt.% TiC composites for aerospace applications
K. R. Ramkumar et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2019)
Fabrication of functionally-graded yttria-stabilized zirconia coatings by 355 nm picosecond dual-beam pulsed laser deposition
Chun Deng et al.
COMPOSITES PART B-ENGINEERING (2019)
Carbon nanotubes-reinforced aluminum alloy functionally graded materials fabricated by powder extrusion process
Dasom Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Functionally graded structures of refractory metals by wire arc additive manufacturing
Gianrocco Marinelli et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2019)
On the Feasibility of Tailoring Copper-Nickel Functionally Graded Materials Fabricated through Laser Metal Deposition
Sreekar Karnati et al.
METALS (2019)
Enhancement of mechanical and sliding wear properties of functionally graded Al-12Si-Cu composites
R. Jojith et al.
MATERIALS RESEARCH EXPRESS (2019)
Investigation on fabrication and property of graded composites obtained via centrifugal casting in the magnetic field
Justyna Zygmuntowicz et al.
COMPOSITES PART B-ENGINEERING (2019)
Effect of Main Parameters on the Mechanical and Wear Behaviour of Functionally Graded Materials by Centrifugal Casting: A Review
Bassiouny Saleh et al.
METALS AND MATERIALS INTERNATIONAL (2019)
Additive fabrication of 316L/Inconel625/Ti6Al4V functionally graded materials by laser synchronous preheating
Wei Meng et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Additive manufacturing of functionally graded materials: A review
Chi Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Sliding Wear Studies on Heat-Treated Functionally Graded Cu-Ni-Si/TiC Composite
R. Jojith et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2019)
Functionally graded materials classifications and development trends from industrial point of view
Islam M. El-Galy et al.
SN APPLIED SCIENCES (2019)
Fabrication and mechanical properties of aluminum-carbon nanotube functionally-graded cylinders
Ehab I. Salama et al.
MATERIALIA (2019)
Prediction of mechanical properties and modeling on sliding wear behavior of LM25/TiC composite using response surface methodology
N. Radhika et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2018)
Fabrication and characterization of W-Cu functionally graded material by spark plasma sintering process
A. K. Chaubey et al.
FUSION ENGINEERING AND DESIGN (2018)
Role of Centrifugal Casting on Electrochemical Corrosion Behavior of A356-SiCp Composite in 3.5 wt.% NaCl
S. Maimunnisa et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Fabrication of LM 25/WC functionally graded composite for automotive applications and investigation of its mechanical and wear properties
R. Jojith et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2018)
Microstructural and Tribological Characteristics of Al-10Cu-Fe alloy Produced by Vertical Centrifugal Casting process
L. Sankara Rao et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2018)
Comparison of the mechanical and wear behaviour of aluminium alloy with homogeneous and functionally graded silicon nitride composites
N. Radhika
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2018)
Recent advances in the manufacturing processes of functionally graded materials: a review
Rityuj Singh Parihar et al.
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2018)
Effect of magnesium content on the microstructure and dry sliding wear behavior of centrifugally cast functionally graded A356-Mg2Si in situ composites
Subhash Chandra Ram et al.
MATERIALS RESEARCH EXPRESS (2018)
Design of Gradient Composites of Aluminum and Graphite by the Centrifugal-Casting Method
E. D. Eidel'man et al.
TECHNICAL PHYSICS (2018)
Studies on Tribological Characteristics of Centrifugally Cast SiCp-Reinforced Functionally Graded A319 Aluminium Matrix Composites
E. Jayakumar et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2018)
Fabrication of Ceramic Reinforcement Aluminium and Its Alloys Metal Matrix Composite Materials: A Review
Pankaj Kumar Gupta et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Functionally graded materials and processing techniques: An art of review
D. T. Sarathchandra et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Characterization of B4C-Composite-Reinforced Aluminum Alloy Composites
Ram Singh et al.
ADVANCES IN MECHANICAL DESIGN, MATERIALS AND MANUFACTURE (2018)
The mechanical properties and abrasive wear behavior of functionally graded aluminum/AlB2 composites produced by centrifugal casting
N. Radhika et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2017)
Influence of Operating Parameters on the Tribological Performance of Oleic Acid-Functionalized Cu Nanofluids
Ajay Kumar et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
Analytical models for functionally graded adhesive single lap joints: A comparative study
N. Stein et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2017)
Characterization of mechanical properties and three-body abrasive wear of functionally graded aluminum LM25/titanium carbide metal matrix composite
N. Radhika et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2017)
Adaptive metamaterials by functionally graded 4D printing
M. Bodaghi et al.
MATERIALS & DESIGN (2017)
Functionally graded shape memory alloys: Design, fabrication and experimental evaluation
Bashir S. Shariat et al.
MATERIALS & DESIGN (2017)
Characterization of functionally graded Al-SiCp metal matrix composites manufactured by centrifugal casting
I. M. El-Galy et al.
ALEXANDRIA ENGINEERING JOURNAL (2017)
Effect of TiC particles on the mechanical properties of aluminium alloy metal matrix composites (MMCs)
Utkarsh Pandey et al.
MATERIALS TODAY-PROCEEDINGS (2017)
Additive manufacturing of a functionally graded material from Ti-6Al-4V to Invar: Experimental characterization and thermodynamic calculations
Lourdes D. Bobbio et al.
ACTA MATERIALIA (2017)
A Review on Functionally Gradient Materials (FGMs) and Their Applications
Valmik Bhavar et al.
2017 2ND INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS RESEARCH AND MANUFACTURING TECHNOLOGIES (AMRMT 2017) (2017)
Processing and properties evaluation of functionally continuous graded 7075 Al alloy/SiC composites
T. Ram Prabhu
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2017)
Enhancement in tribological behaviour of functionally graded SiC reinforced aluminium composites by centrifugal casting
Akhil S. Karun et al.
JOURNAL OF COMPOSITE MATERIALS (2016)
Tool-workpiece contact detection in micro-milling using wireless-aided accelerometer sensor
Sritama Roy et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)
SiC and Al2O3 Reinforced Aluminum Metal Matrix Composites for Heavy Vehicle Clutch Applications
S. Dhanasekaran et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
The Influence of Al2O3 Powder Morphology on the Properties of Cu-Al2O3 Composites Designed for Functionally Graded Materials (FGM)
Agata Strojny-Nedza et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)
Functionally graded polymeric materials: A brif review of current fabrication methods and introduction of a novel fabrication method
Davood Almasi et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Development of functionally graded aluminium composites using centrifugal casting and influence of reinforcements on mechanical and wear properties
N. Radhika et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)
Production of functionally graded SiC/Al-Cu-Mg composite by centrifugal casting
Omer Savas et al.
SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS (2016)
Functionally graded materials: A review of fabrication and properties
Minoo Naebe et al.
APPLIED MATERIALS TODAY (2016)
A review of theories for the modeling and analysis of functionally graded plates and shells
Huu-Tai Thai et al.
COMPOSITE STRUCTURES (2015)
Mechanical and tribological properties of functionally graded aluminium/zirconia metal matrix composite synthesized by centrifugal casting
N. Radhika et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2015)
Experimental Investigation on Abrasive Wear Behavior of Functionally Graded Aluminum Composite
N. Radhika et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2015)
Recent development in modeling and analysis of functionally graded materials and structures
Ankit Gupta et al.
PROGRESS IN AEROSPACE SCIENCES (2015)
Microstructural characterization and mechanical properties of functionally graded Al2024/SiC composites prepared by powder metallurgy techniques
F. Erdemir et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Design and fabrication of functionally graded in-situ aluminium composites for automotive pistons
A. G. Arsha et al.
MATERIALS & DESIGN (2015)
Parametric study of development of Inconel-steel functionally graded materials by laser direct metal deposition
Kamran Shah et al.
MATERIALS & DESIGN (2014)
Toolpaths for additive manufacturing of functionally graded materials (FGM) parts
Pierre Muller et al.
RAPID PROTOTYPING JOURNAL (2014)
Developments in Processing of Functionally Gradient Metals and Metal-Ceramic Composites: A Review
T. P. D. Rajan et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2014)
Anodization Mechanism on SiC Nanoparticle Reinforced Al Matrix Composites Produced by Power Metallurgy
Sonia C. Ferreira et al.
MATERIALS (2014)
A critical review of recent research on functionally graded plates
D. K. Jha et al.
COMPOSITE STRUCTURES (2013)
Fabrication of Al-Si-Mg functionally graded materials tube reinforced with in situ Si/Mg2Si particles by centrifugal casting
Xuedong Lin et al.
COMPOSITES PART B-ENGINEERING (2013)
Metallic Functionally Graded Materials: A Specific Class of Advanced Composites
Jerzy J. Sobczak et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2013)
Investigation on diffusion bonding of functionally graded WC-Co/Ni composite and stainless steel
Keqin Feng et al.
MATERIALS & DESIGN (2013)
Investigation into the Mechanical Properties and Fracture Behavior of A356 Aluminum Alloy-Based ZrO2-Particle-Reinforced Metal-Matrix Composites
H. Abdizadeh et al.
MECHANICS OF COMPOSITE MATERIALS (2013)
Evaluation of Centrifugal Casting Process Parameters for In Situ Fabricated Functionally Gradient Fe-TiC Composite
Mohammad Reza Rahimipour et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2013)
Effect of Sliding Distance, Applied Load, and Weight Percentage of Reinforcement on the Abrasive Wear Properties of In Situ Synthesized Al-12%Si/TiC Composites
Belete Sirahbizu Yigezu et al.
TRIBOLOGY TRANSACTIONS (2013)
An approach for increase of reinforcement content in particle rich zone of centrifugally cast SiCP/Al composites
K. Wang et al.
JOURNAL OF COMPOSITE MATERIALS (2012)
Developments in Solidification Processing of Functionally Graded Aluminium Alloys and Composites by Centrifugal Casting Technique
T. P. D. Rajan et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2012)
Corrosion behaviour of Al/Al3Ti and Al/Al3Zr functionally graded materials produced by centrifugal solid-particle method: Influence of the intermetallics volume fraction
S. C. Ferreira et al.
CORROSION SCIENCE (2011)
Aluminum alloy pistons reinforced with SiC fabricated by centrifugal casting
Xiaoyu Huang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Corrosion behaviour of aluminium syntactic functionally graded composites
S. C. Ferreira et al.
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY (2010)
Characterization of centrifugal cast functionally graded aluminum-silicon carbide metal matrix composites
T. P. D. Rajan et al.
MATERIALS CHARACTERIZATION (2010)
Characteristics of two Al based functionally gradient composites reinforced by primary Si particles and Si/in situ Mg2Si particles in centrifugal casting
Zhai Yan-bo et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2010)
Dry sliding wear of Al alloy/SiCp functionally graded composites: Influence of processing conditions
A. C. Vieira et al.
WEAR (2009)
Formation of solidification microstructures in centrifugal cast functionally graded aluminium composites
T. P. D. Rajan et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2009)
A Novel Fabrication Method for Functionally Graded Materials under Centrifugal Force: The Centrifugal Mixed-Powder Method
Yoshimi Watanabe et al.
MATERIALS (2009)
Microstructure and properties of functionally graded Al-Mg-B composites fabricated by centrifugal casting
Z. Humberto Melgarejo et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Centrifugal casting of functionally graded aluminium matrix composite components
T. P. D. Rajan et al.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2008)
Advantages of the centrifugal casting technique for the production of structural components with Al-Si alloys
G. Chirita et al.
MATERIALS & DESIGN (2008)
Functionally gradient metal matrix composites: Numerical analysis of the microstructure-strength relationships
Leon L. Mishnaevsky
COMPOSITES SCIENCE AND TECHNOLOGY (2006)
Wear resistance of a functionally-graded aluminum matrix composite
Z. Humberto Melgarejo et al.
SCRIPTA MATERIALIA (2006)
Theoretical study on fabrication of functionally graded material with density gradient by a centrifugal solid-particle method
Tetsuro Ogawa et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Functionally graded aluminum matrix composites produced by centrifugal casting
NB Duque et al.
MATERIALS CHARACTERIZATION (2005)
Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems
DW Hutmacher et al.
TRENDS IN BIOTECHNOLOGY (2004)
Processing techniques for functionally graded materials
B Kieback et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Functionally graded materials for sensor and energy applications
E Müller et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Functionally graded materials for biomedical applications
W Pompe et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Research on distribution of SiC particles in aluminum-alloy matrix functionally graded composite tube manufactured by centrifugal casting
XH Qin et al.
JOURNAL OF MATERIALS SCIENCE LETTERS (2002)
Microstructure and mechanical behavior of functionally graded Al A359/SiCp composite
R Rodríguez-Castro et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Functionally graded Ti/HAP coatings on Ti-6Al-4V obtained by chemical solution deposition
YM Lim et al.
CERAMICS INTERNATIONAL (2002)
Fabrication of ZrO2-NiCr functionally graded material by powder metallurgy
JC Zhu et al.
MATERIALS CHEMISTRY AND PHYSICS (2001)
Modeling the solidification of functionally graded materials by centrifugal casting
JW Gao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)