Improved Thermodynamic Model for Lean Natural Gas Spark Ignition in a Diesel Engine Using a Triple Wiebe Function

The use of natural gas (NG) in heavy-duty internal combustion engines can reduce the dependence on petroleum fuels and greenhouse gas emissions. Diesel engines can convert to NG spark ignition (SI) by installing a high-energy ignition system and a gas injector. The diesel combustion chamber affects the flow inside the cylinder, so some existing SI combustion models will not accurately describe the operation of converted diesels. For example, the single Wiebe function has difficulties in correctly describing the mass fraction burn (MFB) throughout the combustion process. This study used experiments from a 2L single-cylinder research engine converted to port fuel injection NG SI and operated with methane at 1300 rpm and equivalence ratio 0.8 (6.2 bars IMEP) to compare the standard Wiebe function with a triple Wiebe function. Results indicated that lean-burn engine operation at an advanced spark timing produced three peaks in the heat release rate, suggesting a multi-stage combustion process. A best goodness-of-fit approach determined the values of the key parameters in the zero-dimensional Wiebe function model. The triple Wiebe function described the mass fraction burn and combustion phasing more accurately compared with the single Wiebe function. Moreover, it provided the duration and phasing of each individual burning stage that can then characterize the combustion in such converted diesel engines. This suggests that a multiple Wiebe function combustion model would effectively assist in analyzing such a multi-stage combustion process, which is important for engine optimization and development.