Study on heat transfer and cooling performance of copper foams cured MIL-101 adsorption unit tube

A composite copper foams cured MIL-101 (CFCM) prepared by a binderless dip-coating method was exploited. A CFCM-95 adsorption unit tube was developed and the heat transfer performance of CFCM-95 adsorber was studied. Parameters optimization of CFCM-95/isobutane working pair were determined. Results show that MIL-101 is uniformly cured in the three-dimensional dense pores of copper foams, and the maximum thermal conductivity of CFCM reaches 0.86 W/(m.K), which is 14 times higher than that of MIL-101 powder. The fluctuating heating time of unit volume of adsorbents in CFCM-95 adsorber (from 30 degrees C to 50 degrees C) is 1.56 s m(3)/kg, which is half that of MIL-101 fixed bed adsorber. Moreover, the cooling rate of the CFCM-95 adsorber (from 62 degrees C to 30 degrees C) is 1.1 degrees C/s, which is 3.5 times faster than that of MIL-101 fixed bed adsorber. The cooling capacity, specific cooling power (SCP) and volumetric cooling power (VCP) is 1.8, 2.6 and 4 times that of the adsorption cooling system (ACS) with MIL-101 lisobutane working pair, respectively, and among them, VCP is up to 4.442 kW/m(3). These results are of great significance for reducing the volume of adsorption chillers and promoting the applications of adsorption cooling technology. (C) 2019 Published by Elsevier Ltd.