A carbon fiber thermoelectric generator integrated as a lamina within an 8-ply laminate epoxy composite: Efficient thermal energy harvesting by advanced structural materials

For the first time, the fabrication of a thermoelectric generator (TEG) consisting of carbon fiber (CF) tows and its integration as a lamina within an 8-ply laminate epoxy composite is reported. Commercially available M40B and A-38 CF tows exhibited a Seebeck coefficient (S) of +33.85 mu V/K (p-type) and -11.83 mu V/K (n-type), respectively. Scanning electron microscopy highlighted the CF morphological characteristics and the fiber mean diameters. Electrical conductivity measurements revealed the extremely high values of 1.63 +/- 0.04x10(5) S/m for the CF-M40B and 1.14 +/- 0.03x10(5) S/m for the CF-A38. CF-M40B of 33.4mm length were employed to fabricate a TEG consisting of ten serially interconnected thermocouples. The TEG-enabled CF reinforced polymer (CFRP) composite consisted of unidirectional fabrics at an alternating [0/90](2s) symmetric configuration, with the CF TEG module comprising the bottom lamina. The CFRP TEG laminate exhibited a voltage output of 19.56 +/- 1.31 mV at a temperature difference (Delta T) of 75 degrees C. A reference CFRP was tested in terms of mechanical performance via three point bending and compared to the TEG-enabled one. Finite Elements modeling validated the CFRP thermoelectric performance corroborating the experimental findings. Structural TEG-enabled CFRPs demonstrated for the first time in this work are envisaged to harvest thermal energy losses on a large scale during the operational lifetime of advanced composites.