Multi-objective thermo-economic optimization of organic Rankine cycle (ORC) power systems in waste-heat recovery applications using computer-aided molecular design techniques

In this paper, we develop a framework for designing optimal organic Rankine cycle (ORC) power systems that simultaneously considers both thermodynamic and economic objectives. This methodology relies on computer-aided molecular design (CAMD) techniques that allow the identification of an optimal working fluid during the thermo-economic optimization of the system. The SAFT-gamma Mie equation of state is used to determine the necessary thermodynamic properties of the designed working fluids, with critical and transport properties estimated using empirical group-contribution methods. The framework is then applied to the design of sub-critical and non-recuperated ORC systems in different applications spanning a range of heat-source temperatures. When minimizing the specific investment cost (SIC) of these systems, it is found that the optimal molecular size of the working fluid is linked to the heat-source temperature, as expected, but also that the introduction of a minimum pinch point constraint that is commonly employed to account for inherent trade-offs between system performance and cost is not necessary. The optimal SICs of waste-heat ORC systems with heat-source temperatures of 150 degrees C, 250 degrees C and 350 degrees C are 10120 pound, 4040 pound and 2910 pound per kW, when employing propane, 2-butane and 2-heptene as the working fluids, respectively. During a set of MINLP optimizations of the ORC systems with heat-source temperatures of 150 degrees C and 250 degrees C, it is found that 1,3-butadiene and 4-methyl-2-pentene are the best-performing working fluids, respectively, with SICs of 9640 pound per kW and 4000 pound per kW. These substances represent novel working fluids for ORC systems that cannot be determined a priori by specifying any working-fluid family or by following traditional methods of testing multiple fluids. Interestingly, the same molecules are identified in a multi-objective optimization considering both the total investment cost and net power output. These findings highlight the power of this approach as it enables the selection of novel working fluids while optimizing ORC systems using single or multiple thermo-economic performance indicators.