Recovery of Astaxanthin-Containing Oil from Haematococcus pluvialis by Nano-dispersion and Oil Partitioning

The feasibilities of cell disruption by homogenization-assisted high-pressure nano-dispersion and recovery of astaxanthin-containing oil by oil partitioning in oil-acetone-water solution were examined. The total fatty acid content of Haematococcus pluvialis was 414.6 mg/g cell, and the astaxanthin content was 4.4% of oil. Extra oil was added to the solution in order to recover oil through instability of dispersion status instead of solvent evaporation. A total amount of energy of 0.34 kWh/L was consumed for acetone evaporation at 50 degrees C, whereas fully 1.86 kWh/L of energy for water evaporation was consumed. When soybean oil was added to the solution after partial acetone evaporation, the oil-recovery yield was 97.8%, while the yield after full evaporation was 97.6% in 10-g/L solution. However, the energy consumed for partial evaporation (0.29 kWh/L) was much lower than that for full evaporation (0.40 kWh/L). When H. pluvialis oil was added to the solution after partial evaporation, the oil-recovery yield decreased to 90.6% due to the impurity of crude H. pluvialis oil in 10-g/L solution. Methods such as refining of H. pluvialis oil, increase of microalgae dosage for cell disruption, and increase of the injection amount of extra oil can help to enhance oil recovery.