Related references
Note: Only part of the references are listed.Effect of Twinning Behavior on Dynamic Recrystallization During Extrusion of AZ31Mg Alloy
Liwei Lu et al.
JOM (2019)
Evaluating the textural and mechanical properties of an Mg-Dy alloy processed by high-pressure torsion
Abdelkader Hanna et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Microstructure and mechanical properties of AZ31 magnesium alloy sheets processed by constrained groove pressing
Zongshen Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Changes of Microstructures and Mechanical Properties in Commercially Pure Titanium after Different Cycles of Proposed Multi-Directional Forging
Zhanguang Zheng et al.
METALS (2019)
Microstructural evolution and mechanical behavior of copper processed by low strain amplitude multi-directional forging
Paula Cibely Alves Flausino et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Influence of rolling temperature on microstructural evolution and mechanical behavior of AZ31 alloy with accumulative roll bonding
Xixin Rao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effects of repetitive upsetting-extrusion parameters on microstructure and texture evolution of Mg-Gd-Y-Zn-Zr alloy
Guanshi Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Secondary γ′ evolution and relationship to hot deformation behavior of a supersolvus-treated superalloy with high precipitate volume fraction
X. Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Dynamic compression-induced twins and martensite and their combined effects on the adiabatic shear behavior in a Ti-8.5Cr-1.5Sn alloy
Huiliang Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
High-cycle-fatigue induced continuous grain growth in ultrafine-grained titanium
P. Zhao et al.
ACTA MATERIALIA (2019)
Effect of equal channel angular pressing (ECAP) on the evolution of texture, microstructure and mechanical properties in the Al-Cu-Li alloy AA2195
M. Suresh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Microstructural evolution of aluminum alloy during friction stir welding under different tool rotation rates and cooling conditions
X. H. Zeng et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
High-pressure torsion of iron with various purity levels and validation of Hall-Petch strengthening mechanism
Robert Tejedor et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Competition for impurity atoms between defects and solid solution during high pressure torsion
A. A. Mazilkin et al.
SCRIPTA MATERIALIA (2019)
The effect of microstructure and texture evolution on the hardness properties of the cold rolled AA7075-T6 aluminum alloy during the friction stir processing
F. Harati et al.
MATERIALS RESEARCH EXPRESS (2019)
Bulk Nanocrystalline Ferrite Stabilized through Grain Boundary Carbon Segregation
Yulia Ivanisenko et al.
ADVANCED ENGINEERING MATERIALS (2018)
An EBSD analysis of Fe-36% Ni alloy processed by HPT at ambient and a warm temperature
Kamel Tirsatine et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effect of high-pressure torsion on grain refinement, strength enhancement and uniform ductility of EZ magnesium alloy
Krzysztof Bryla et al.
MATERIALS LETTERS (2018)
Texture and microhardness of Mg-Rare Earth (Nd and Ce) alloys processed by high-pressure torsion
Yousf Islem Bourezg et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructure and creep behaviour of P92 steel after HPT
Petr Kral et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
An investigation of the limits of grain refinement after processing by a combination of severe plastic deformation techniques: A comparison of Al and Mg alloys
Shima Sabbaghianrad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Enhanced grain refinement and microhardness by hybrid processing using hydrostatic extrusion and high-pressure torsion
P. Bazarnik et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of temperature rise on microstructural evolution during high-pressure torsion
Kaveh Edalati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Generation and healing of porosity in high purity copper by high-pressure torsion
Yuanshen Qi et al.
MATERIALS CHARACTERIZATION (2018)
A Study of the Structure, Mechanical Properties and Corrosion Resistance of Magnesium Alloy WE43 After Rotary Swaging
N. S. Martynenko et al.
METAL SCIENCE AND HEAT TREATMENT (2018)
Orientation imaging microscopy and microhardness in a ZK60 magnesium alloy processed by high-pressure torsion
Seyed Alireza Torbati-Sarraf et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Phase transitions in Cu-based alloys under high pressure torsion
B. B. Straumal et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
The effect of bismuth on microstructure evolution of ultrafine grained copper
A. Kosinova et al.
MATERIALS LETTERS (2017)
Strengthening of A2024 alloy by high-pressure torsion and subsequent aging
Intan Fadhlina Mohamed et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Direct influence of recovery behaviour on mechanical properties in oxygen-free copper processed using different SPD techniques: HPT and ECAP
Meshal Y. Alawadhi et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2017)
Effects on hardness and microstructure of AISI 1020 low-carbon steel processed by high-pressure torsion
Diana Maritza Marulanda Cardona et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2017)
Phase evolution of highly immiscible alloys under shear deformation: Kinetic pathways, steady states, and the lever-rule
Yinon Ashkenazy et al.
ACTA MATERIALIA (2017)
Competition between precipitation and dissolution in Cu-Ag alloys under high pressure torsion
B. B. Straumal et al.
ACTA MATERIALIA (2017)
Review: grain boundary faceting-roughening phenomena
B. B. Straumal et al.
JOURNAL OF MATERIALS SCIENCE (2016)
A study of densification and phase transformations of nanocomposite Cu-Fe prepared by mechanical alloying and consolidation process
M. Azabou et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Activation of titanium-vanadium alloy for hydrogen storage by introduction of nanograins and edge dislocations using high-pressure torsion
Kaveh Edalati et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)
Production of nanostructure copper by planar twist channel angular extrusion process
M. Shamsborhan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Microstructural Inhomogeneity in Constrained Groove Pressed Cu-Zn Alloy Sheet
Prabhat Chand Yadav et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2016)
Microstructural evolution and mechanical properties of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion
Murat Isik et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2016)
Grain refinement of intermetallic compounds in the Cu-Sn system under high pressure torsion
A. Korneva et al.
MATERIALS LETTERS (2016)
Strengthening of age-hardenable WE43 magnesium alloy processed by high pressure torsion
E. A. Lukyanova et al.
MATERIALS LETTERS (2016)
Effect of equal channel angular pressing on the thermal-annealing-induced microstructure and texture evolution of cold-rolled copper
Z. N. Mao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Microstructure quantification of ultrafine grained pure copper fabricated by simple shear extrusion (SSE) technique
E. Bagherpour et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
The significance of self-annealing at room temperature in high purity copper processed by high-pressure torsion
Yi Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Microstructure evolution of pure copper during a single pass of simple shear extrusion (SSE): role of shear reversal
E. Bagherpour et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Grain Refinement Mechanism and Evolution of Dislocation Structure of Co-Cr-Mo Alloy Subjected to High-Pressure Torsion
Murat Isik et al.
MATERIALS TRANSACTIONS (2016)
Real Hydrostatic Pressure in High-Pressure Torsion Measured by Bismuth Phase Transformations and FEM Simulations
Kaveh Edalati et al.
MATERIALS TRANSACTIONS (2016)
Effect of processing route on grain refinement in pure copper processed by equal channel angular extrusion
Chao-lan Tang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)
Phase transitions induced by severe plastic deformation: steady-state and equifinality
Boris B. Straumal et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2015)
Amorphization of Nd-Fe-B alloy under the action of high-pressure torsion
B. B. Straumal et al.
MATERIALS LETTERS (2015)
Amorphization of crystalline phases in the Nd-Fe-B alloy driven by the high-pressure torsion
B. B. Straumal et al.
MATERIALS LETTERS (2015)
Influence of dislocation-solute atom interactions and stacking fault energy on grain size of single-phase alloys after severe plastic deformation using high-pressure torsion
Kaveh Edalati et al.
ACTA MATERIALIA (2014)
Transformation of Hume-Rothery phases under the action of high pressure torsion
B. B. Straumal et al.
JETP LETTERS (2014)
Phase transitions during high pressure torsion of Cu-Co alloys
B. B. Straumal et al.
MATERIALS LETTERS (2014)
High-pressure torsion of palladium: Hydrogen-induced softening and plasticity in ultrafine grains and hydrogen-induced hardening and embrittlement in coarse grains
Toshifumi Hongo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Improving the mechanical properties of pure magnesium by three-roll planetary milling
Mathilde Diez et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Dynamic recrystallization and recovery during high-pressure torsion: Experimental evidence by torque measurement using ring specimens
Kaveh Edalati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Deformation-driven formation of equilibrium phases in the Cu-Ni alloys
B. B. Straumal et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Equal-Channel Angular Pressing and High-Pressure Torsion of Pure Copper: Evolution of Electrical Conductivity and Hardness with Strain
Kaveh Edalati et al.
MATERIALS TRANSACTIONS (2012)
Accelerated Diffusion and Phase Transformations in Co-Cu Alloys Driven by the Severe Plastic Deformation
Boris B. Straumal et al.
MATERIALS TRANSACTIONS (2012)
High-pressure torsion of pure metals: Influence of atomic bond parameters and stacking fault energy on grain size and correlation with hardness
Kaveh Edalati et al.
ACTA MATERIALIA (2011)
Evolution of defects in copper deformed by high-pressure torsion
J. Cizek et al.
ACTA MATERIALIA (2011)
Transmission electron microscopy investigation of boundaries between amorphous grains in Ni50Nb20Y30 alloy
A. A. Mazilkin et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Microstructural evolution in an aluminum solid solution alloy processed by ECAP
Cheng Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Microstructures and mechanical properties of pure copper deformed severely by equal-channel angular pressing and high pressure torsion
N. Lugo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Vacancy production during plastic deformation in copper determined by in situ X-ray diffraction
Tamas Ungar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Softening of nanostructured Al-Zn and Al-Mg alloys after severe plastic deformation
A. A. Mazilkin et al.
ACTA MATERIALIA (2006)
Temperature influence on the faceting of Sigma 3 and Sigma 9 grain boundaries in Cu
BB Straumal et al.
ACTA MATERIALIA (2006)
Vacancy concentrations determined from the diffuse background scattering of X-rays in plastically deformed copper
T Ungár et al.
ZEITSCHRIFT FUR METALLKUNDE (2005)
Facet-defacet transition of grain boundaries in alumina
MJ Kim et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2004)
Grain-size effect on the deformation mechanisms of nanostructured copper processed by high-pressure torsion
XZ Liao et al.
JOURNAL OF APPLIED PHYSICS (2004)
Pokrovsky-Talapov critical behavior and rough-to-rough ridges of the Σ3 coincidence tilt boundary in Mo -: art. no. 196101
BB Straumal et al.
PHYSICAL REVIEW LETTERS (2004)
Faceting of Σ3 and Σ9 grain boundaries in copper
BB Straumal et al.
INTERFACE SCIENCE (2001)
Grain boundary grooving as an indicator of grain boundary phase transformations
J Scholhammer et al.
INTERFACE SCIENCE (2001)
Share Paper
