Related references
Note: Only part of the references are listed.Mechanical Characteristics and Failure Prediction of Cement Mortar with a Sandwich Structure
Xuesheng Liu et al.
MINERALS (2019)
An Innovative Method for Placement of Gangue Backfilling Material in Steep Underground Coal Mines
Yanchun Yin et al.
MINERALS (2019)
Development of Environmental Friendly Dust Suppressant Based on the Modification of Soybean Protein Isolate
Hu Jin et al.
PROCESSES (2019)
A novel conceptual model of fracture evolution patterns in the overlying strata during horizontal coal seam mining
Longqing Shi et al.
ARABIAN JOURNAL OF GEOSCIENCES (2019)
Roof Cutting Parameters Design for Gob-Side Entry in Deep Coal Mine: A Case Study
Deyuan Fan et al.
ENERGIES (2019)
Thermo-hydro-mechanical-chemical couplings controlling CH4 production and CO2 sequestration in enhanced coalbed methane recovery
Chaojun Fan et al.
ENERGY (2019)
Uniaxial Compression Behavior of Cement Mortar and Its Damage-Constitutive Model Based on Energy Theory
Yunliang Tan et al.
MATERIALS (2019)
Strainburst process of marble in tunnel-excavation-induced stress path considering intermediate principal stress
Jiang Bang-you et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY (2019)
Rock cone penetration test under lateral confining pressure
Kai Fang et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)
Modelling and optimization of enhanced coalbed methane recovery using CO2/N2 mixtures
Chaojun Fan et al.
FUEL (2019)
Overlying strata structural modeling and support applicability analysis for large mining-height stopes
Zhijie Wen et al.
JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2019)
Shear Rate Effects on the Post-peak Shear Behaviour and Acoustic Emission Characteristics of Artificially Split Granite Joints
Fanzhen Meng et al.
ROCK MECHANICS AND ROCK ENGINEERING (2019)
Roof Deformation Characteristics and Preventive Techniques Using a Novel Non-Pillar Mining Method of Gob-Side Entry Retaining by Roof Cutting
Yajun Wang et al.
ENERGIES (2018)
Study and discussion of short-strip coal pillar recovery with cemented paste backfill
Qiang Sun et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)
Assessment of roof convergence during driving roadways in underground coal mines by continuous miner
Prabhat Kumar Mandal et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)
Element geochemical characteristics and formation environment for the roof, floor and gangue of coal seams in the Gujiao mining area, Xishan coalfield, China
Gang Wang et al.
JOURNAL OF GEOCHEMICAL EXPLORATION (2018)
Dynamic Characteristics of Green Sandstone Subjected to Repetitive Impact Loading: Phenomena and Mechanisms
S. H. Li et al.
ROCK MECHANICS AND ROCK ENGINEERING (2018)
An innovative support technology employing a concrete-filled steel tubular structure for a 1000-m-deep roadway in a high in situ stress field
W. P. Huang et al.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY (2018)
Control mechanisms and design for a 'coal-backfill-gangue' support system for coal mine gob-side entry retaining
J. G. Ning et al.
INTERNATIONAL JOURNAL OF OIL GAS AND COAL TECHNOLOGY (2018)
Roadside support schemes numerical simulation and field monitoring of gob-side entry retaining in soft floor and hard roof
Qing Ma et al.
ARABIAN JOURNAL OF GEOSCIENCES (2018)
Mechanical properties and damage constitutive model of coal in coal-rock combined body
X. S. Liu et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)
Study of a no-pillar mining technique with automatically formed gob-side entry retaining for longwall mining in coal mines
Qi Wang et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2018)
Principles of the roof cut short-arm beam mining method (110 method) and its mining-induced stress distribution
Tao Zhigang et al.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2018)
Effect of Particle Size on the Energy Evolution of Crushed Waste Rock in Coal Mines
Meng Li et al.
ROCK MECHANICS AND ROCK ENGINEERING (2017)
An Innovative Approach for Gob-Side Entry Retaining in Thick Coal Seam Longwall Mining
Manchao He et al.
ENERGIES (2017)
Investigation of Hydraulic-Mechanical Properties of Paste Backfill Containing Coal Gangue-Fly Ash and Its Application in an Underground Coal Mine
Xinguo Zhang et al.
ENERGIES (2017)
In Situ Investigations on Failure Evolution of Overlying Strata Induced by Mining Multiple Coal Seams
Y. L. Tan et al.
GEOTECHNICAL TESTING JOURNAL (2017)
Structure optimal design research on backfill hydraulic support
Zhang Qiang et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY (2017)
Real-time observation of meso-fracture process in backfill body during mine subsidence using X-ray CT under uniaxial compressive conditions
Wei Sun et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Adaptation assessment of gob-side entry retaining based on geological factors
Hongyun Yang et al.
ENGINEERING GEOLOGY (2016)
Application of solid backfilling to reduce hard-roof caving and longwall coal face burst potential
Jixiong Zhang et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2016)
Damage constitutive model based on energy dissipation for intact rock subjected to cyclic loading
X. S. Liu et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2016)
Surface subsidence control theory and application to backfill coal mining technology
Jixiong Zhang et al.
ENVIRONMENTAL EARTH SCIENCES (2015)
Front abutment pressure concentration forecast by monitoring cable-forces in the roof
Y. L. Tan et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)
An innovative approach for gob-side entry retaining in highly gassy fully-mechanized longwall top-coal caving
Zizheng Zhang et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)
Design and construction of entry retaining wall along a gob side under hard roof stratum
Y. L. Tan et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2015)
Roof Deformation, Failure Characteristics, and Preventive Techniques of Gob-Side Entry Driving Heading Adjacent to the Advancing Working Face
Jian-biao Bai et al.
ROCK MECHANICS AND ROCK ENGINEERING (2015)
Longwall mining cutting cantilever beam theory and 110 mining method in China-The third mining science innovation
Manchao He et al.
JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2015)
Study on gob-side entry retaining in fully-mechanized longwall with top-coal caving and its application
Su Hai et al.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2015)
Effects of curing and stress conditions on hydromechanical, geotechnical and geochemical properties of cemented paste backfill
Erol Yilmaz et al.
ENGINEERING GEOLOGY (2014)
Designing mine tailings for better environmental, social and economic outcomes: a review of alternative approaches
Mansour Edraki et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Deep coal seams as a greener energy source: a review
A. S. Ranathunga et al.
JOURNAL OF GEOPHYSICS AND ENGINEERING (2014)
Soft-strong supporting mechanism of gob-side entry retaining in deep coal seams threatened by rockburst
Ning Jianguo et al.
INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2014)
An innovative approach for gateroad layout in highly gassy longwall top coal caving
Shuai Yan et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2013)
Effect of desliming of sulphide-rich mill tailings on the long-term strength of cemented paste backfill
Bayram Ercikdi et al.
JOURNAL OF ENVIRONMENTAL MANAGEMENT (2013)
Impact law of the bulk ratio of backfilling body to overlying strata movement in fully mechanized backfilling mining
Jixiong Zhang et al.
JOURNAL OF MINING SCIENCE (2012)
Stability and deformation of surrounding rock in pillarless gob-side entry retaining
Zhang Nong et al.
SAFETY SCIENCE (2012)
Share Paper
