Related references
Note: Only part of the references are listed.Micro-nano 3D printing of electronically conductive polymers as a new process for achieving higher electronic conductivities
K. Yamada et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2019)
Multimaterial 3D laser microprinting using an integrated microfluidic system
Frederik Mayer et al.
SCIENCE ADVANCES (2019)
Fabrication and tribological characterization of deformation-resistant nano textured surfaces produced by two-photon lithography and atomic layer deposition
Jason G. Steck et al.
TRIBOLOGY INTERNATIONAL (2019)
Imaging of latent three-dimensional exposure patterns created by direct laser writing in photoresists
Edy Yulianto et al.
APPLIED SURFACE SCIENCE (2019)
A novel highly electrically conductive composite resin for stereolithography
Giorgio Scordo et al.
MATERIALS TODAY COMMUNICATIONS (2019)
Systematic λ/21 resolution achieved in nanofabrication by two-photon-absorption induced polymerization
Yahya Bougdid et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2019)
Single-cell Raman microscopy of microengineered cell scaffolds
Sara J. Baldock et al.
JOURNAL OF RAMAN SPECTROSCOPY (2019)
Two-Photon Polymerization as a Tool for Studying 3D Printed Topography-Induced Stem Cell Fate
Kristan S. Worthington et al.
MACROMOLECULAR BIOSCIENCE (2019)
Exposure-dependent refractive index of Nanoscribe IP-Dip photoresist layers
Stephan Dottermusch et al.
OPTICS LETTERS (2019)
Controlling the shape of 3D microstructures by temperature and light
Marc Hippler et al.
NATURE COMMUNICATIONS (2019)
3D Photoluminescent Nanostructures Containing Quantum Dots Fabricated by Two-Photon Polymerization: Influence of Quantum Dots on the Spatial Resolution of Laser Writing
Ying Peng et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
3D-Printed Biodegradable Microswimmer for Theranostic Cargo Delivery and Release
Hakan Ceylan et al.
ACS NANO (2019)
Studies of 3D directed cell migration enabled by direct laser writing of curved wave topography
Daniel Cheng et al.
BIOFABRICATION (2019)
A 3D Real-Scale, Biomimetic, and Biohybrid Model of the Blood-Brain Barrier Fabricated through Two-Photon Lithography
Attilio Marino et al.
SMALL (2018)
In-Gel Direct Laser Writing for 3D-Designed Hydrogel Composites That Undergo Complex Self-Shaping
Akihiro Nishiguchi et al.
ADVANCED SCIENCE (2018)
Multiphoton-Polymerized 3D Protein Assay
Richard Wollhofen et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Optical Materials Forming Tightly Polymerized Voxels during Laser Direct Writing
Prem Prabhakaran et al.
ADVANCED ENGINEERING MATERIALS (2018)
A Subtractive Photoresist Platform for Micro- and Macroscopic 3D Printed Structures
Markus M. Zieger et al.
ADVANCED FUNCTIONAL MATERIALS (2018)
Femtosecond laser writing of PPV-doped three-dimensional polymeric microstructures
Oriana Ines Avila et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2018)
Tunable mechanical properties of stent-like microscaffolds for studying cancer cell recognition of stiffness gradients
Enrico Domenico Lemma et al.
MICROELECTRONIC ENGINEERING (2018)
Improved development procedure to enhance the stability of microstructures created by two-photon polymerization
Julia Purtov et al.
MICROELECTRONIC ENGINEERING (2018)
Beyond 100 nm resolution in 3D laser lithography - Post processing solutions
G. Seniutinas et al.
MICROELECTRONIC ENGINEERING (2018)
Optical lithography of three-dimensional magnetophotonic microdevices
Dam Thuy Trang Nguyen et al.
OPTICAL ENGINEERING (2018)
Femtosecond laser direct writing of ion exchangeable multifunctional microstructures
Huan Wang et al.
OPTICS LETTERS (2018)
Humidity-responsive actuation of programmable hydrogel microstructures based on 3D printing
Chao Lv et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Digital light processing for the fabrication of 3D intrinsically conductive polymer structures
Andrew T. Cullen et al.
SYNTHETIC METALS (2018)
Adding chemically selective subtraction to multi-material 3D additive manufacturing
David Graefe et al.
NATURE COMMUNICATIONS (2018)
Microstructures Fabricated by Two-Photon Polymerization and Their Remote Manipulation Techniques: Toward 3D Printing of Micromachines
Yang Lin et al.
ADVANCED OPTICAL MATERIALS (2018)
Nanoscale 3D printing of hydrogels for cellular tissue engineering
Shangting You et al.
JOURNAL OF MATERIALS CHEMISTRY B (2018)
Dynamic Actuation of Soft 3D Micromechanical Structures Using Micro-Electromechanical Systems (MEMS)
Rachael K. Jayne et al.
ADVANCED MATERIALS TECHNOLOGIES (2018)
Fabrication of soft, stimulus-responsive structures with sub-micron resolution via two-photon polymerization of poly(ionic liquid)s
Alexandru Tudor et al.
MATERIALS TODAY (2018)
Magnetic-field-driven ultra-small 3D hydrogel microstructures: Preparation of gel photoresist and two-photon polymerization microfabrication
Zhong Xiong et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Read on Demand Images in Laser-Written Polymerizable Liquid Crystal Devices
Chloe C. Tartan et al.
ADVANCED OPTICAL MATERIALS (2018)
Photo-responsive suspended micro-membranes
Emiliano Descrovi et al.
JOURNAL OF MATERIALS CHEMISTRY C (2018)
Bio-inspired soft robotics: Material selection, actuation, and design
Stephen Coyle et al.
EXTREME MECHANICS LETTERS (2018)
Printing Polymer Nanocomposites and Composites in Three Dimensions
Rouhollah Dermanaki Farahani et al.
ADVANCED ENGINEERING MATERIALS (2018)
From photoinduced electron transfer to 3D metal microstructures via direct laser writing
Erik Hagen Waller et al.
NANOPHOTONICS (2018)
3D Chemical Patterning of Micromaterials for Encoded Functionality
Hakan Ceylan et al.
ADVANCED MATERIALS (2017)
Mechanical Properties Tunability of Three-Dimensional Polymeric Structures in Two-Photon Lithography
Enrico Domenico Lemma et al.
IEEE TRANSACTIONS ON NANOTECHNOLOGY (2017)
Toward Direct Laser Writing of Actively Tuneable 3D Photonic Crystals
Yaoyang Hu et al.
ADVANCED OPTICAL MATERIALS (2017)
Mobile microrobots for bioengineering applications
Hakan Ceylan et al.
LAB ON A CHIP (2017)
Development of electrically conductive microstructures based on polymer/CNT nanocomposites via two-photon polymerization
U. Staudinger et al.
MICROELECTRONIC ENGINEERING (2017)
Microactuation and sensing using reversible deformations of laser-written polymeric structures
S. Rekstyte et al.
NANOTECHNOLOGY (2017)
Comparison of three types of redox active polymer for two photon stereolithography
Laura Folkertsma et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2017)
Extracellular Matrix Scaffolds for Tissue Engineering and Regenerative Medicine
Sheng Yi et al.
CURRENT STEM CELL RESEARCH & THERAPY (2017)
3D Chiral Plasmonic Metamaterials Fabricated by Direct Laser Writing: The Twisted Omega Particle
Ioanna Sakellari et al.
ADVANCED OPTICAL MATERIALS (2017)
Magnetically Driven Micromachines Created by Two-Photon Microfabrication and Selective Electroless Magnetite Plating for Lab-on-a-Chip Applications
Tommaso Zandrini et al.
MICROMACHINES (2017)
Multi-Component Microscaffold With 3D Spatially Defined Proteinaceous Environment
Daniela Serien et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
Multi-Component Microscaffold With 3D Spatially Defined Proteinaceous Environment
Daniela Serien et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2017)
3D Fluorescence-Based Security Features by 3D Laser Lithography
Frederik Mayer et al.
ADVANCED MATERIALS TECHNOLOGIES (2017)
Micro-Structured Two-Component 3D Metamaterials with Negative Thermal-Expansion Coefficient from Positive Constituents
Jingyuan Qu et al.
SCIENTIFIC REPORTS (2017)
Additive manufacture of complex 3D Au-containing nanocomposites by simultaneous two-photon polymerisation and photoreduction
Qin Hu et al.
SCIENTIFIC REPORTS (2017)
Biodegradable Materials and Metallic Implants-A Review
Mythili Prakasam et al.
JOURNAL OF FUNCTIONAL BIOMATERIALS (2017)
Polymer/Carbon Nanotubes (CNT) Nanocomposites Processing Using Additive Manufacturing (Three-Dimensional Printing) Technique: An Overview
Sushanta Ghoshal
FIBERS (2017)
3D Laser Micro- and Nanoprinting: Challenges for Chemistry
Christopher Barner-Kowollik et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)
Protein-Based 3D Microstructures with Controllable Morphology and pH-Responsive Properties
Shuxin Wei et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Polymer Microstructures through Two-Photon Crosslinking
David Schwaerzle et al.
ADVANCED MATERIALS (2017)
Harnessing Photochemical Shrinkage in Direct Laser Writing for Shape Morphing of Polymer Sheets
Anton A. Bauhofer et al.
ADVANCED MATERIALS (2017)
Nanolattices: An Emerging Class of Mechanical Metamaterials
Jens Bauer et al.
ADVANCED MATERIALS (2017)
Mechanical property of PEG hydrogel and the 3D red blood cell microstructures fabricated by two-photon polymerization
Xiaorong Gou et al.
APPLIED SURFACE SCIENCE (2017)
3D high-resolution two-photon crosslinked hydrogel structures for biological studies
Laura Brigo et al.
ACTA BIOMATERIALIA (2017)
Cleaving Direct-Laser-Written Microstructures on Demand
Markus M. Zieger et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)
Functionalized 3D Architected Materials via Thiol-Michael Addition and Two-Photon Lithography
Daryl W. Yee et al.
ADVANCED MATERIALS (2017)
Three-Dimensional Soft Material Micropatterning via Direct Laser Lithography of Flexible Molds
Irene Bernardeschi et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Laser-Directed Assembly of Aligned Carbon Nanotubes in Three Dimensions for Multifunctional Device Fabrication
Wei Xiong et al.
ADVANCED MATERIALS (2016)
Three-Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications
Rouhollah D. Farahani et al.
ADVANCED MATERIALS (2016)
Fabrication of Conductive 3D Gold-Containing Microstructures via Direct Laser Writing
Eva Blasco et al.
ADVANCED MATERIALS (2016)
Simultaneous Dual Encoding of Three-Dimensional Structures by Light-Induced Modular Ligation
Tanja K. Claus et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)
Wavelength selective polymer network formation of end-functional star polymers
Michael Kaupp et al.
CHEMICAL COMMUNICATIONS (2016)
Fabrication of gold microstructures using negative photoresists doped with gold ions through two-photon excitation
Ryotaro Nakamura et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)
Self-Folding Thermo-Magnetically Responsive Soft Microgrippers
Joyce C. Breger et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Two-Photon Lithography of 3D Nanocomposite Piezoelectric Scaffolds for Cell Stimulation
Attilio Marino et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
3D Micropatterned Surface Inspired by Salvinia molesta via Direct Laser Lithography
Omar Tricinci et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Piezoelectric Nanoparticle-Assisted Wireless Neuronal Stimulation
Attilio Marino et al.
ACS NANO (2015)
Water-soluble photopolymerizable chitosan hydrogels for biofabrication via two-photon polymerization
Olga Kufelt et al.
ACTA BIOMATERIALIA (2015)
Magnetic Helical Microswimmers Functionalized with Lipoplexes for Targeted Gene Delivery
Famin Qiu et al.
ADVANCED FUNCTIONAL MATERIALS (2015)
Efficient Photochemical Approaches for Spatially Resolved Surface Functionalization
Guillaume Delaittre et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)
Microfabrication of Photo-Cross-Linked Hyaluronan Hydrogels by Single- and Two-Photon Tyramine Oxidation
Claudia Loebel et al.
BIOMACROMOLECULES (2015)
Subcellular stretch-induced cytoskeletal response of single fibroblasts within 3D designer scaffolds
Andrea C. Scheiwe et al.
BIOMATERIALS (2015)
Biomedical applications of hydrogels: A review of patents and commercial products
Enrica Calo et al.
EUROPEAN POLYMER JOURNAL (2015)
Photocurable Polymer Nanocomposites for Magnetic, Optical, and Biological Applications
Seo Woo Song et al.
IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS (2015)
Connecting Silicon Photonic Circuits to Multicore Fibers by Photonic Wire Bonding
Nicole Lindenmann et al.
JOURNAL OF LIGHTWAVE TECHNOLOGY (2015)
Nanofabrication by electron beam lithography and its applications: A review
Yifang Chen
MICROELECTRONIC ENGINEERING (2015)
Biomimicry at the nanoscale: current research and perspectives of two-photon polymerization
Attilio Marino et al.
NANOSCALE (2015)
Fabrication of three-dimensional multi-protein microstructures for cell migration and adhesion enhancement
Yong Da Sie et al.
BIOMEDICAL OPTICS EXPRESS (2015)
Preclinical study of SZ2080 material 3D microstructured scaffolds for cartilage tissue engineering made by femtosecond direct laser writing lithography
Justinas Maciulaitis et al.
BIOFABRICATION (2015)
Nanostructured Brownian Surfaces Prepared through Two-Photon Polymerization: Investigation of Stem Cell Response
Attilio Marino et al.
ACS NANO (2014)
The Osteoprint: A bioinspired two-photon polymerized 3-D structure for the enhancement of bone-like cell differentiation
Attilio Marino et al.
ACTA BIOMATERIALIA (2014)
Superparamagnetic Twist-Type Actuators with Shape-Independent Magnetic Properties and Surface Functionalization for Advanced Biomedical Applications
Christian Peters et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Fabrication and Spatially Resolved Functionalization of 3D Microstructures via Multiphoton-Induced Diels-Alder Chemistry
Alexander S. Quick et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
High-Resolution 3D Direct Laser Writing for LiquidCrystalline Elastomer Microstructures
Hao Zeng et al.
ADVANCED MATERIALS (2014)
Hyaluronic Acid Based Materials for Scaffolding via Two-Photon Polymerization
Olga Kufelt et al.
BIOMACROMOLECULES (2014)
Fabrication of Zinc Oxide Nanowires/Polymer Composites by Two-Photon Polymerization
Ruben Dario Fonseca et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2014)
Direct laser writing of synthetic poly(amino acid) hydrogels and poly(ethylene glycol) diacrylates by two-photon polymerization
Elli Kapyla et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Organic- and molecule-based magnets
Joel S. Miller
MATERIALS TODAY (2014)
Two-photon polymerization: investigation of chemical and mechanical properties of resins using Raman microspectroscopy
Li Jia Jiang et al.
OPTICS LETTERS (2014)
Hybrid Helical Magnetic Microrobots Obtained by 3D Template-Assisted Electrodeposition
Muhammad A. Zeeshan et al.
SMALL (2014)
Comparison of in Situ and ex Situ Methods for Synthesis of Two-Photon Polymerization Polymer Nanocomposites
Qingchuan Guo et al.
POLYMERS (2014)
Hydrogels for Two-Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix
Jan Torgersen et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
Three-Dimensional Microscaffolds Exhibiting Spatially Resolved Surface Chemistry
Benjamin Richter et al.
ADVANCED MATERIALS (2013)
Fabrication and Characterization of Magnetic Microrobots for Three-Dimensional Cell Culture and Targeted Transportation
Sangwon Kim et al.
ADVANCED MATERIALS (2013)
Grafting Efficiency of Synthetic Polymers onto Biomaterials: A Comparative Study of Grafting-from versus Grafting-to
Susanne Hansson et al.
BIOMACROMOLECULES (2013)
Superparamagnetic microrobots: fabrication by two-photon polymerization and biocompatibility
Marcel Suter et al.
BIOMEDICAL MICRODEVICES (2013)
3D microfabrication of single-wall carbon nanotube/polymer composites by two-photon polymerization lithography
Shota Ushiba et al.
CARBON (2013)
Pre-osteoblastic cell response on three-dimensional, organic-inorganic hybrid material scaffolds for bone tissue engineering
Konstantina Terzaki et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)
Three-dimensional optical laser lithography beyond the diffraction limit
Joachim Fischer et al.
LASER & PHOTONICS REVIEWS (2013)
Preparation of Reactive Three-Dimensional Microstructures via Direct Laser Writing and Thiol-ene Chemistry
Alexander S. Quick et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2013)
In vitro and in vivo evaluation of SU-8 biocompatibility
Krishnamurthy V. Nemani et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Direct laser writing of three-dimensional narrow bandgap and high refractive-index PbSe structures in a solution
Zongsong Gan et al.
OPTICS EXPRESS (2013)
3D fabrication of all-polymer conductive microstructures by two photon polymerization
Kestutis Kurselis et al.
OPTICS EXPRESS (2013)
Poly(ionic liquid)s: An update
Jiayin Yuan et al.
PROGRESS IN POLYMER SCIENCE (2013)
Three-dimensional deep sub-diffraction optical beam lithography with 9 nm feature size
Zongsong Gan et al.
NATURE COMMUNICATIONS (2013)
Formation of three-dimensional carbon microstructures via two-photon microfabrication and microtransfer molding
Yuya Daicho et al.
OPTICAL MATERIALS EXPRESS (2013)
Diffusion-Assisted High-Resolution Direct Femtosecond Laser Writing
Ioanna Sakellari et al.
ACS NANO (2012)
Magnetic Helical Micromachines: Fabrication, Controlled Swimming, and Cargo Transport
Soichiro Tottori et al.
ADVANCED MATERIALS (2012)
Two-Photon Continuous Flow Lithography
Simona C. Laza et al.
ADVANCED MATERIALS (2012)
Photo-sensitive hydrogels for three-dimensional laser microfabrication in the presence of whole organisms
Jan Torgersen et al.
JOURNAL OF BIOMEDICAL OPTICS (2012)
Using Laser Microfabrication to Write Conductive Polymer/SWNTs Nanocomposites
Qingchuan Guo et al.
JOURNAL OF LASER MICRO NANOENGINEERING (2012)
The Influence of Piezoelectric Scaffolds on Neural Differentiation of Human Neural Stem/Progenitor Cells
Yee-Shuan Lee et al.
TISSUE ENGINEERING PART A (2012)
Subwavelength Direct Laser Patterning of Conductive Gold Nanostructures by Simultaneous Photopolymerization and Photoreduction
Shobha Shukla et al.
ACS NANO (2011)
Synthesis of Photopolymerizable Hydrophilic Macromers and Evaluation of Their Applicability as Reactive Resin Components for the Fabrication of Three-Dimensionally Structured Hydrogel Matrices by 2-Photon-Polymerization
Albrecht Berg et al.
ADVANCED ENGINEERING MATERIALS (2011)
Two-Component Polymer Scaffolds for Controlled Three-Dimensional Cell Culture
Franziska Klein et al.
ADVANCED MATERIALS (2011)
Laser Fabrication of Three-Dimensional CAD Scaffolds from Photosensitive Gelatin for Applications in Tissue Engineering
Aleksandr Ovsianikov et al.
BIOMACROMOLECULES (2011)
Principles of voxel refinement in optical direct write lithography
Timothy F. Scott et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Solvent response of polymers for micromachine manipulation
Ye Tian et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2011)
Laser fabrication of Au nanorod aggregates microstructures assisted by two-photon polymerization
Kyoko Masui et al.
OPTICS EXPRESS (2011)
Ultra-thin conductive free-standing PEDOT/PSS nanofilms
Francesco Greco et al.
SOFT MATTER (2011)
Fabrication of 2D protein microstructures and 3D polymer-protein hybrid microstructures by two-photon polymerization
Sascha Engelhardt et al.
BIOFABRICATION (2011)
Laser Fabrication of 3D Gelatin Scaffolds for the Generation of Bioartificial Tissues
Aleksandr Ovsianikov et al.
MATERIALS (2011)
3D conducting nanostructures fabricated using direct laser writing
Konstantina Terzaki et al.
OPTICAL MATERIALS EXPRESS (2011)
Elastic Fully Three-dimensional Microstructure Scaffolds for Cell Force Measurements
Franziska Klein et al.
ADVANCED MATERIALS (2010)
Ferrofluids for Fabrication of Remotely Controllable Micro-Nanomachines by Two-Photon Polymerization
Hong Xia et al.
ADVANCED MATERIALS (2010)
Two-photon polymerization of titanium-containing sol-gel composites for three-dimensional structure fabrication
I. Sakellari et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2010)
Development of glucose sensor using two-photon adsorbed photopolymerization
Jong Min Kim et al.
BIOPROCESS AND BIOSYSTEMS ENGINEERING (2010)
High performance magnetically controllable microturbines
Ye Tian et al.
LAB ON A CHIP (2010)
Medical prototyping using two photon polymerization
Roger J. Narayan et al.
MATERIALS TODAY (2010)
Orthogonal Transformations on Solid Substrates: Efficient Avenues to Surface Modification
Leena Nebhani et al.
ADVANCED MATERIALS (2009)
Rare-Earth Spontaneous Emission Control in Three-Dimensional Lithium Niobate Photonic Crystals
Airan Rodenas et al.
ADVANCED MATERIALS (2009)
High refractive index polymers: fundamental research and practical applications
Jin-gang Liu et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
Three-Dimensional Biodegradable Structures Fabricated by Two-Photon Polymerization
Frederik Claeyssens et al.
LANGMUIR (2009)
Remote manipulation of micronanomachines containing magnetic nanoparticles
Juan Wang et al.
OPTICS LETTERS (2009)
Achieving λ/20 Resolution by One-Color Initiation and Deactivation of Polymerization
Linjie Li et al.
SCIENCE (2009)
Gold Helix Photonic Metamaterial as Broadband Circular Polarizer
Justyna K. Gansel et al.
SCIENCE (2009)
3D Metallic Nanostructure Fabrication by Surfactant-Assisted Multiphoton-Induced Reduction
Yao-Yu Cao et al.
SMALL (2009)
Ultra-Low Shrinkage Hybrid Photosensitive Material for Two-Photon Polymerization Microfabrication
Aleksandr Ovsianikov et al.
ACS NANO (2008)
Multicolor polymer nanocomposites: In situ synthesis and fabrication of 3D microstructures
Zheng-Bin Sun et al.
ADVANCED MATERIALS (2008)
Fast solvent-driven micropump fabricated by two-photon microfabrication
Zhong Xiong et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2008)
Multiphoton fabrication of chemically responsive protein hydrogels for microactuation
Bryan Kaehr et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2008)
Extreme ultraviolet lithography: A review
Banqiu Wua et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2007)
Route to three-dimensional metallized microstructures using cross-linkable epoxide SU-8
Yun-Sheng Chen et al.
CHEMISTRY OF MATERIALS (2007)
Log-pile photonic crystal of CdS-polymer nanocomposites fabricated by combination of two-photon polymerization and in situ synthesis
Z. -B. Sun et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2007)
Effects of direct current electrical stimulation on gene expression of osteopromotive factors in a posterolateral spinal fusion model
Douglas C. Fredericks et al.
SPINE (2007)
Multiphoton fabrication
Christopher N. LaFratta et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2007)
Fabrication and characterization of three-dimensional silver-coated polymeric microstructures
Yun-Sheng Chen et al.
ADVANCED FUNCTIONAL MATERIALS (2006)
Two-photon-induced reduction of metal ions for fabricating three-dimensional electrically conductive metallic microstructure
T Tanaka et al.
APPLIED PHYSICS LETTERS (2006)
Selective functionalization of 3-D polymer microstructures
RA Farrer et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2006)
Direct laser writing of three-dimensional photonic crystals with complete a photonic bandgap in chalcogenide glasses
S Wong et al.
ADVANCED MATERIALS (2006)
Two-photon polymerization of metal ions doped acrylate monomers and oligomers for three-dimensional structure fabrication
XM Duan et al.
THIN SOLID FILMS (2004)
Two-photon three-dimensional microfabrication of poly(dimethylsiloxane) elastomers
CA Coenjarts et al.
CHEMISTRY OF MATERIALS (2004)
Properties of crosslinked protein matrices for tissue engineering applications synthesized by multiphoton excitation
S Basu et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2004)
Acrylic-based resin with favorable properties for three-dimensional two-photon polymerization
T Baldacchini et al.
JOURNAL OF APPLIED PHYSICS (2004)
Magnetic micro-actuators and systems (MAGMAS)
O Cugat et al.
IEEE TRANSACTIONS ON MAGNETICS (2003)
Liquid photocurable biodegradable copolymers:: In vivo degradation of photocured poly(ε-caprolactone-co-trimethylene carbonate)
M Mizutani et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)
Finer features for functional microdevices - Micromachines can be created with higher resolution using two-photon absorption.
S Kawata et al.
NATURE (2001)
Share Paper
